Fogtech®DX Instant Anti-Fog Cloth, 12-pack

Fogtech®DX Instant Anti-Fog Cloth, 12-pack

Fogtech®DX Instant Anti-Fog Cloth is a fast and highly effective anti-fog treatment for safety glasses, goggles, visors and other compatible plastic and glass optics. This 12-pack contains twelve individually sealed, pre-moistened cloths, making it ideal for regular use, keeping several treatments in your gear bag or sharing between multiple users.

Fogtech®DX leaves a microscopically thin, transparent coating on the lens that absorbs and spreads moisture before it can form the tiny droplets we see as fog. It is particularly useful in airsoft, where heat, perspiration and restricted airflow can quickly fog eye protection.

How does Fogtech®DX work?

Fogtech®DX uses water-absorbing, silicone-based surfactants. After application, the fast-evaporating carrier disappears and leaves a thin transparent coating on the lens. Instead of allowing moisture from perspiration, breathing or humid air to condense into visible droplets, the coating absorbs and spreads the moisture across the surface.

The result is a clear lens without the misty layer that would normally obstruct vision.

Fast treatment without polishing

Each Fogtech®DX cloth is individually sealed and pre-moistened, so the correct amount of solution is easy to apply without sprays, separate applicators or polishing.

1. Make sure the lens is clean. If there is dust or grit on the surface, rinse it away with water first to avoid scratching the lens.
2. Open one packet immediately before use.
3. Wipe a wet, even coat of Fogtech®DX over the side of the lens that normally fogs.
4. Leave the coating to dry clear. Typical drying time is approximately five seconds.
5. Do not buff or polish the coating after application. Rubbing the coating dry can reduce both its anti-fog performance and optical clarity.

Fogtech®DX can be completely removed with plain water or a damp cloth. If the lenses are treated regularly, it is a good idea to wash them periodically and apply a fresh coating to a clean surface.

Designed for long-lasting anti-fog protection

Fogtech®DX is designed so that a single correctly applied treatment can provide anti-fog protection for an entire day under typical conditions. Actual duration depends on the environment, moisture level, handling of the lenses and the type of eyewear being used.

Extremely wet conditions, direct exposure to water or steam, wiping the lens or other unusually demanding conditions can shorten the life of the coating.

Suitable for plastic and glass optics

Fogtech®DX is designed for plastic and glass optics, including polycarbonate safety lenses, goggles and visors.

Please note: some prescription lenses and advanced water-, oil- or fingerprint-repellent coatings are specifically designed to reject topical treatments. Coatings such as Crizal® and Alize® may therefore prevent Fogtech®DX from adhering properly and can significantly reduce or completely prevent its anti-fog effect.

If prescription glasses are worn underneath protective goggles, both sides of the prescription lenses may need to be treated if both surfaces are prone to fogging.

Why individually sealed cloths?

Each cloth provides a consistent amount of Fogtech®DX and stays protected from dust and dirt until the packet is opened. The 12-pack is convenient for active players, teams and other users who need anti-fog treatment regularly.

Atom Airsoft comment

Over the years, we at Atom Airsoft have tested many different anti-fog products in airsoft use. Most of them have provided at least some benefit, but Fogtech®DX has proven to be the most reliable option in our own experience.

Many other anti-fog treatments have required reapplication during a game day, while a correctly applied Fogtech treatment has regularly lasted through the entire day. We have also distributed Fogtech test samples to players at larger airsoft events and received similarly positive feedback.

For players who regularly struggle with fogging eye protection, Fogtech®DX is one of the products we are comfortable recommending based on our own experience.

Features

• 12 individually sealed Fogtech®DX anti-fog cloths
• Fast-acting anti-fog treatment for compatible plastic and glass optics
• Particularly suitable for safety glasses, goggles and visors
• Creates a microscopically thin transparent anti-fog coating
• Absorbs and spreads moisture before visible fog droplets can form
• Typical drying time approximately 5 seconds
• No polishing or buffing required
• Designed to provide long-lasting protection from a single application
• Individually sealed pre-moistened cloths
• Coating can be removed with plain water or a damp cloth

Important

• Do not buff or polish the coating after application.
• Clean dust and grit from the lens before treatment to avoid scratching.
• Some water- and oil-repellent lens coatings may prevent Fogtech®DX from working correctly.
• Keep each packet sealed until use to prevent evaporation.
• The liquid contains a flammable alcohol carrier. Keep away from heat, sparks and open flames until the coating has dried.
• Avoid contact with eyes.

Technical specifications

• Brand: Fogtech®
• Manufacturer: MotoSolutions®
• Product: Fogtech®DX Instant Anti-Fog Cloth
• Product type: pre-moistened anti-fog lens cloth
• Suitable surfaces: compatible plastic and glass optics
• Typical applications: safety glasses, goggles, visors and prescription eyewear
• Solution per sealed packet: approximately 1.4 g
• Typical drying time: approximately 5 seconds
• Application: wet coat, allow to dry clear - do not buff
• Package contents: 12 individually sealed Fogtech®DX anti-fog cloths

Downloads

• Technical Data Sheet (EN, PDF)
• Safety Data Sheet (EN, PDF)

Business customers

Fogtech®DX is also suitable for professional environments where fogging safety eyewear creates problems, including workshops, industrial applications, sports and other occupations requiring protective eyewear.

Larger quantities are available for business customers. For more information, contact info@atom-airsoft.fi.