EPeS Cylinder head AEG Mk.II UNI V2/3 - short

The EPeS AEG Mk.II uni V2/3 cylinder head is a revolutionary upgrade part for V2 and V3 compatible gearboxes. The EPeS cylinder head features a unique design solution that secures the cylinder head in the correct position inside the gearbox and eliminates any unwanted movement during firing. Its innovative design allows the tappet plate to achieve a longer stroke for maximum performance and reliability in AEG replicas. The excellent dimensional accuracy and manufacturing quality of the EPeS cylinder head are ensured by finishing the part with an H+PTFE surface treatment. This superior finish guarantees extremely smooth and responsive nozzle movement.

Note!

The EPeS AEG Mk.II uni V2/3 – short cylinder head is supplied without a damping pad. Our selection includes various polyurethane damping pads manufactured by EPeS in different hardness levels. These pads are available in three different thicknesses and hardness options. In addition, we offer EPeS Sorbothane pads in various hardness and thickness options. The best cylinder head setup is achieved by selecting the appropriate damping pad and Sorbothane pad based on the dimensions of the build and other component choices.

EPeS special impact-absorbing pads, made from durable polyurethane, improve airflow and provide maximum durability and shock absorption. They are available in three different hardness levels and four thickness options, allowing you to set the AOE ideally.

Manufacturer product name: EPeS Cylinder head AEG Mk.II uni V2/3 – short

Features

• Short version – the short nozzle guide rod is best suited for nozzles under 20 mm in length (e.g., some AK models or EVO III ASG)
• Nozzle guide rod diameter is 5.35 mm, standard size (also available in Extra Fit (EF) version with a 5.40 mm diameter)
• Extended tappet plate stroke. Using the longer stroke requires filing the cylinder
  • Allows the use of a nozzle up to 1 mm longer than standard for a tighter seal between the nozzle and hop-up rubber during firing
  • Eliminates potential feeding issues while maintaining perfect sealing between the nozzle and hop-up rubber during firing
• Unique screw-tightening solution to eliminate play between the cylinder head and gearbox shell and to secure the cylinder head in place
• Pin holes designed for optimal fit with RetroArms gearbox shells
• Made from EN AW 7075-T6 aircraft-grade duralumin, finished with proven H+PTFE coating for ideal sliding properties while maintaining high surface wear resistance
• Manufactured in the Czech Republic

Selecting a damping pad and SorboPad for the EPeS cylinder head:

Order a suitable polyurethane damping pad or SorboPad together with the cylinder head.

• Separately sold damping pads are made from polyurethane (PU) in 70, 80, and 90 sh hardness levels, with a maximized impact surface area. Pad thickness is 3 mm.
  • 70 sh hardness for springs up to SP130
  • 80 sh hardness for springs up to SP160
  • 90 sh hardness for springs SP170 or higher
  • For replicas with very high rate of fire or large ammo capacity (e.g., machine guns frequently firing bursts of over 100 BBs), we recommend using one level softer spring than stated above. For example, with machine guns, the maximum spring strength for 70 sh hardness is SP120.
• Separately sold SorboPad pads are also available in four different hardness levels. SorboPad improves gearbox shell durability and reduces noise.
  • 40 Duro – black – for springs up to SP100
  • 50 Duro – gray – for springs up to SP110
  • 60 Duro – blue – for springs up to SP120
  • 70 Duro – black – for springs up to SP130
  • For replicas with very high rate of fire or large ammo capacity (e.g., machine guns frequently firing bursts of over 100 BBs), we recommend using one level softer spring than stated above. For example, with machine guns, the maximum spring strength for 70 sh hardness is SP120.
  • For DMR builds using SEMI-only fire mode, one level harder spring can be used.
    • For example, 60 Duro SorboPad is suitable as follows:
      • In a standard AEG up to SP120 spring
      • In a machine gun up to SP110 spring
      • In DMR and other semi-auto builds up to SP130 spring

Package Includes

• 1 cylinder head with two O-rings (21×1.5) – damping pad not included! Order a suitable damping pad or SorboPad with the cylinder head.
• 2 mounting screws M3×3
• 2 mounting screws M3×2

https://www.youtube.com/watch?v=T4lHz_zIuUk