Description
Specna Arms LiPo Battery 11.1V 2000mAh 15/30C 3-Piece Crane - T-plug/Deans
The Specna Arms 11.1V 2000mAh LiPo Battery is a high-capacity, three-piece battery designed for AEG airsoft guns with limited or divided battery compartment space. Its flexible Crane/Butterfly configuration is particularly suitable for compatible crane-style stocks, while the 2000mAh capacity provides extended operating time. The 11.1V voltage and 15C/30C discharge rating make it a practical power source for AEG builds designed to operate with 11.1V LiPo batteries.
The battery combines the high energy density of lithium-polymer technology with a three-section design that allows the individual battery sections to be positioned within suitable compartments. Its T-plug/Deans connector provides a reliable electrical connection with low contact resistance.
Three-Piece Crane/Butterfly Design
The battery consists of three slim sections, each measuring approximately 130 × 18 × 8 mm. This configuration is particularly useful in crane-style stocks with separate battery compartments, where a conventional single-piece battery may not fit.
The divided construction provides flexibility when arranging the battery inside the replica. However, the available battery space and connector position should always be checked before choosing a battery.
2000mAh Capacity and 11.1V Performance
The 2000mAh capacity provides more stored energy than smaller 1100mAh or 1300mAh batteries, allowing longer operating time under comparable conditions. This makes the battery a practical choice for longer airsoft games when frequent battery changes are inconvenient.
The 11.1V configuration can provide faster trigger response and a higher rate of fire than a 7.4V battery in compatible AEGs. The 15C continuous and 30C burst discharge ratings provide the current delivery needed for the changing electrical demands of the gearbox.
11.1V LiPo batteries place greater demands on AEG electrical and mechanical components than 7.4V batteries. Make sure your replica is designed to operate with 11.1V LiPo batteries before use.
Technical Specifications
- Manufacturer: Specna Arms
- Battery type: LiPo (Lithium Polymer)
- Configuration: 3-piece Crane / Butterfly
- Voltage: 11.1V
- Number of cells: 3S
- Capacity: 2000mAh
- Continuous discharge rate: 15C
- Burst discharge rate: 30C
- Connector: T-plug/Deans
- Dimensions: 3 × 130 × 18 × 8 mm (each battery section)
- Manufacturer code: SPE-06-024610
- EAN: 5902543173270
LiPo Battery Charging and Storage
Use a compatible LiPo balance charger and charge the battery at room temperature. Proper cell balancing helps maintain battery performance and service life.
Do not discharge the battery below 3.0V per cell or charge it above 4.2V per cell. For extended storage, use an appropriate LiPo storage charge and disconnect the battery from the airsoft gun after use.