Description
Specna Arms SA-F04-RL FLEX™ BLDC™ Light Ops Stock / HAL ETU™ Gen. 2 - Pink
The Specna Arms SA-F04-RL FLEX™ BLDC™ Gen. 2 is a lightweight, high-performance M4-style AEG combining a factory-installed Dark Matter™ 27k brushless motor with programmable HAL™ ETU electronics and a reinforced Aether™ V2 gearbox. The Magnus™ TDC hop-up, Helium™ Flat Hop bucking and ESA™ quick spring-change system complete a package designed for players who want fast trigger response, advanced functionality and reliable performance without immediately upgrading the internal components.
The FLEX™ BLDC™ series brings high-performance motor technology and advanced gearbox components into an accessible price category. The SA-F04-RL combines these features with a nylon fibre-reinforced polymer receiver, M-LOK handguard and compact adjustable Light Ops stock. Its distinctive pink and black colour scheme offers an alternative to traditional airsoft rifle finishes without compromising the internal equipment.
Dark Matter™ 27k Brushless Motor - Fast Trigger Response and Improved Efficiency
One of the most important upgrades in the FLEX™ BLDC™ series is the factory-installed Specna Arms Dark Matter™ High Speed 27k brushless motor.
Unlike conventional brushed AEG motors, a brushless motor does not rely on carbon brushes making mechanical contact with the rotating components. This reduces friction and brush wear while improving electrical efficiency.
The Dark Matter™ motor provides strong torque and responsive acceleration, helping the gearbox complete its firing cycle quickly and consistently. This is particularly valuable for players who favour rapid semi-automatic shooting and want a responsive trigger without immediately replacing the factory motor.
The combination of a brushless motor and programmable electronic trigger system also provides a strong foundation for future performance adjustments.
HAL™ ETU Gen. 2 - Programmable Electronic Trigger System
The factory-installed HAL™ ETU uses magnetic Hall-effect sensors to detect trigger movement instead of conventional mechanical trigger contacts. The contactless design reduces mechanical contact wear and allows the trigger activation point to be adjusted electronically.
The system provides extensive control over trigger sensitivity, pre-cocking and the firing modes assigned to the selector positions. Programming is performed directly through the trigger and fire selector, without requiring a separate programming device or smartphone application.
Adjustable trigger sensitivity
The trigger activation point can be adjusted across five levels, from 20% to 100% of the trigger travel. A shorter activation distance gives the rifle a more responsive trigger feel, particularly useful when firing quickly in semi-automatic mode.
Six-level pre-cocking
Pre-cocking allows the piston to remain partially tensioned after a shot, reducing the amount of movement required before the next shot. This can significantly improve the rifle's semi-automatic trigger response.
The six adjustment levels allow the player to select the desired amount of pre-cocking according to the gearbox configuration. Higher settings increase spring tension and mechanical load, so they should be used with the complete build in mind.
Programmable firing modes
The HAL™ ETU allows the SEMI and AUTO selector positions to be configured separately:
- AUTO position: Full Auto, Semi-Auto, 3-Round Burst or 5-Round Burst
- SEMI position: Semi-Auto, Binary Trigger, AUG Mode or Sniper Mode
- Binary Trigger: One shot when the trigger is pulled and another when released
- AUG Mode: Semi-automatic fire with a partial trigger pull and automatic fire with a full pull
- Sniper Mode: Semi-automatic fire with a two-second delay between shots
These functions allow the rifle to be adapted to different playing styles and game formats, from conventional semi-automatic use to controlled bursts and highly responsive trigger operation.
Electronic protection and active brake compatibility
The HAL™ ETU includes low-battery warnings, electronic protection functions and an adjustable active brake feature.
Important: Specna Arms specifically instructs users to disable the HAL™ active brake when using a brushless motor. Since this rifle is equipped with a Dark Matter™ BLDC motor, the active brake must remain disabled.
Reinforced Aether™ V2 Gearbox
The SA-F04-RL FLEX™ BLDC™ features the reinforced Specna Arms Aether™ Version 2 gearbox, designed for demanding AEG operation and convenient maintenance.
The gearbox shell features additional reinforcement at critical stress points, particularly around the front of the gearbox. It also includes inspection openings for checking piston Angle of Engagement (AoE) and pre-cocking, along with practical adjustment and service features.
The gearbox components and features include:
- Reinforced Aether™ V2 gearbox shell
- Strengthened gearbox front section
- Pre-cocking and piston AoE inspection openings
- Anti-reversal latch release access
- Adjustable trigger travel
- Steel gears
- Polycarbonate piston with steel teeth
- Sealed aluminium nozzle
- Steel cut-off lever
- 8 mm gearbox bearings and bushings
- ESA™ quick spring-change system
- Factory-installed HAL™ ETU electronic trigger system
The combination of reinforced internal components and the Dark Matter™ brushless motor provides a durable mechanical foundation for the rifle's fast electronic operation.
Magnus™ TDC Hop-Up and Helium™ Flat Hop Bucking
The rifle features the Specna Arms Magnus™ TDC (Top Dead Center) rotary hop-up chamber. Its adjustment mechanism applies pressure vertically to the hop-up bucking, helping maintain consistent contact with the BB and making adjustments more repeatable.
The chamber is paired with the Helium™ Flat Hop bucking, designed to provide a broad and consistent contact surface. This helps generate stable backspin and is especially useful when using heavier BBs that require sufficient hop-up grip to maintain a predictable flight path.
A 6.03 mm precision inner barrel, approximately 229 mm long, completes the hop-up and compression assembly.
These components provide a well-equipped accuracy system without requiring an immediate replacement of the hop-up chamber, bucking or inner barrel.
ESA™ Quick Spring Change System
The ESA™ quick spring-change system allows the main spring to be replaced without opening the gearbox, making it easier to adapt the rifle's power to different field limits.
The spring can be accessed by removing the stock and buffer tube, then opening the spring guide access using the appropriate tool. This makes changing the spring considerably easier than disassembling a conventional gearbox.
The rifle is supplied with an M120 spring installed at the factory and an additional M90 spring for lower-powered configurations.
Actual muzzle energy depends on the installed spring and the rifle's compression system. The power should always be checked with a chronograph after changing springs.
When using a lighter spring, the motor speed, battery and pre-cocking settings should be considered together to avoid excessive cycling speed and premature piston engagement.
Lightweight FLEX™ Construction and Light Ops Stock
The receiver and M-LOK handguard are manufactured from nylon fibre-reinforced polymer, keeping the rifle lightweight while providing a rigid external structure. Important components, including the outer barrel, flash hider, charging handle and several controls, are manufactured from metal.
The distinctive pink and black finish gives the rifle a recognisable appearance while retaining the familiar M4-style ergonomics.
The receiver features ambidextrous fire selector and magazine release controls, making operation convenient for both right- and left-handed players. A functional bolt catch holds the mock bolt open, providing convenient access to the hop-up adjustment wheel.
The adjustable Light Ops stock features a lightweight, minimalist design, rubberised cheek contact surfaces and a curved rubber butt pad. Its multiple adjustment positions allow the stock length to be adapted to the player.
The M-LOK handguard allows compatible accessories to be mounted directly, while the full-length Picatinny top rail accommodates optics. Folding iron sights are also included.
A 14 mm CCW muzzle thread beneath the flash hider allows compatible tracer units, suppressor replicas and other muzzle devices to be installed.
Technical Specifications
- Manufacturer: Specna Arms
- Series: FLEX™ Gen. 2 BLDC™
- Model: SA-F04-RL Light Ops Stock / HAL ETU™ Gen. 2
- Product type: Electric airsoft rifle (AEG)
- Platform: M4 / AR15
- Calibre: 6 mm BB
- Receiver material: Nylon fibre-reinforced polymer
- Handguard: Polymer M-LOK
- Stock: Adjustable Light Ops stock
- Gearbox: Reinforced Aether™ V2
- Electronic trigger unit: HAL™ ETU Gen. 2
- Trigger detection: Magnetic Hall-effect sensors
- Motor: Specna Arms Dark Matter™ High Speed 27k BLDC brushless
- Motor type: Long
- Trigger sensitivity: 5 adjustable levels
- Pre-cocking: 6 adjustable levels
- Active brake: Available in HAL™, must be disabled with the installed brushless motor
- Firing modes: Programmable Semi-Auto, Full-Auto, Burst, Binary, AUG and Sniper modes
- Gearbox internals: Steel gears, steel-toothed piston and sealed aluminium nozzle
- Bearings and bushings: 8 mm
- Quick spring change: ESA™
- Factory-installed spring: M120
- Additional spring: M90
- Hop-up chamber: Adjustable Magnus™ TDC
- Hop-up bucking: Helium™ Flat Hop
- Inner barrel diameter: 6.03 mm
- Inner barrel length: 229 mm
- Overall length: approximately 670-750 mm
- Weight: approximately 2125 g
- Magazine type: S-MAG mid-cap
- Magazine capacity: 125 rounds per magazine
- Battery connector: T-plug / Deans
- Battery compartment: Stock / buffer tube
- Muzzle thread: 14 mm CCW
- Blowback: No
- Colour: Pink / Black
- Manufacturer product code: SPE-01-047996
- EAN: 5902543211927
Package Contents
- 1 × Specna Arms SA-F04-RL FLEX™ BLDC™ Light Ops Stock / HAL ETU™ Gen. 2 - Pink
- 2 × 125-round S-MAG mid-cap magazines
- 1 × BB speedloader
- 1 × M90 replacement spring
- 1 × Cleaning rod
- 1 × Small Tamiya-to-Deans battery adapter
- 1 × Hex key
- Folding iron sights, installed on the rifle
Battery and charger are not included and must be purchased separately.
HAL™ Trigger Activation Before First Use
The HAL™ trigger must be activated before the rifle is used for the first time. Follow these steps:
- Set the fire selector to SAFE.
- Connect the battery while the selector remains in SAFE.
- Wait approximately three seconds until the rifle emits a beep.
- Pull the trigger fully and hold it for approximately five seconds until another beep is heard.
The second beep confirms successful activation. Repeat the procedure if the HAL™ factory settings are restored.
Important: Keep the active brake disabled when using the factory-installed brushless motor.


















