{"title":"Electrical parts","description":"\u003cp\u003eElectrical components are essential to the performance and reliability of any AEG. In our selection, you’ll find high-quality electrical parts such as MOSFET circuits, connectors, wiring, and switches compatible with various gearbox versions and platforms. We also offer programmable MOSFET units that allow you to customize firing modes and protect your electrical system from overload.\u003c\/p\u003e\n\u003cp\u003eWhether you’re tuning your setup or performing maintenance, the right electrical components are crucial to ensuring your gun’s performance and durability.\u003c\/p\u003e","products":[{"product_id":"picossr-3aeg-mosfet","title":"GATE PicoSSR 3 AEG MOSFET","description":"\u003cp\u003eThe GATE PicoSSR 3™ AEG MOSFET is the physically smallest MOSFET circuit on the market designed for airsoft electric guns. Its dimensions are only \u003cstrong\u003e4x6x21 mm\u003c\/strong\u003e. The PicoSSR 3 offers improved mechanical and electrical performance compared to the previous version. Additionally, the manufacturer guarantees that the PicoSSR 3 can withstand full submersion in water. The unit can be installed in most AEGs and is suitable even for high-power setups (up to M170). The maximum operating voltage is 12.8V.\u003c\/p\u003e \u003cp\u003eThe MOSFET prevents sparking common in traditional mechanical trigger systems, which can otherwise lead to burnt switch contacts. It also reduces the electrical resistance compared to mechanical switches, allowing the motor to draw more power from the battery. This improved efficiency increases the gun's rate of fire and reduces trigger response time.\u003c\/p\u003e \u003cp\u003eThe circuit includes a signal wire.\u003c\/p\u003e \u003cp\u003eInstallation manual: \u003ca href=\"http:\/\/gatee.eu\/picossr2.pdf\"\u003ehttp:\/\/gatee.eu\/picossr2.pdf\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003eNote: Installation requires soldering. The original wiring connections must be modified according to the manual's instructions. Incorrect wiring can permanently damage the unit. Installation may also require opening the gearbox.\u003c\/p\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54236477981020,"sku":"GATE-PICOSSR3","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/gate-picossr-3aeg-mosfet-2.jpg?v=1743361217"},{"product_id":"gate-merf-3-2","title":"GATE MERF 3.2 MOSFET","description":"\u003cp\u003eGate MERF 3.2 is a third-generation MOSFET unit featuring ten functions. The latest addition is a three-round burst mode. The system allows rate of fire reduction without increasing semi-auto delay. The unit protects modern batteries (Li-ion, LiPoly, and LiFePO4) from undervoltage. It includes an \u003cstrong\u003eactive brake\u003c\/strong\u003e and provides the same protection for your AEG’s trigger contacts as a standard MOSFET. The \u003cstrong\u003eSmart Trigger\u003c\/strong\u003e feature enables a shorter trigger response without increasing the rate of fire.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. MOSFET\u003cbr\u003e\n2. Active Brake\u003cbr\u003e\n3. Protection for Li-Poly\/Li-Ion\/LiFePO\u003csub\u003e4\u003c\/sub\u003e\/NiCd batteries\u003cbr\u003e\n4. Short Circuit Protection\u003cbr\u003e\n5. Overheat Protection\u003cbr\u003e\n6. Programmable\u003cbr\u003e\n7. Rate of Fire Control\u003cbr\u003e\n8. 3-round burst mode\u003cbr\u003e\n9. Smart Trigger\u003cbr\u003e\n10. Two installation methods\u003cbr\u003e\n- Simple method: No modifications to the AEG required\u003cbr\u003e\n- Advanced method: Signal wire installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Operates with 3.2–15V batteries\u003cbr\u003e\n2. Compatible with high-performance airsoft guns\u003cbr\u003e\n3. Easy to install\u003cbr\u003e\n4. Full electrical system protection\u003cbr\u003e\n5. Extremely low standby power consumption (0.15mAh)\u003cbr\u003e\n6. Very low resistance (\u003cstrong\u003e2.4m\u003c\/strong\u003e\u003cstrong\u003eΩ\u003c\/strong\u003e)\u003cbr\u003e\n7. Compatible with all gearbox types\u003cbr\u003e\n8. Four-LED display\u003cbr\u003e\n9. Deans-T connectors\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/kpl500.jpg\" alt=\"\" border=\"0\"\u003e\u003c\/p\u003e\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\u003cp\u003e- Extra pair of DEANS-T connectors\u003cbr\u003e\n- Single-wire trigger signal cable\u003cbr\u003e\n- Double-wire trigger signal cable\u003cbr\u003e\n- Programming button\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cimg title=\"Mosfet\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet.jpg\" alt=\"Mosfet\" align=\"middle\" border=\"0\" hspace=\"1\" vspace=\"1\"\u003e\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eA MOSFET eliminates power loss caused by the contact of standard mechanical trigger contacts. Mechanical switches heat up and spark, eventually leading to carbonized contacts. The MOSFET replaces the mechanical switch, preventing contact burn. With a MOSFET, power flows directly from the battery to the motor without passing through worn contacts. This reduces electrical resistance and delivers more power to the motor, resulting in higher rate of fire and shorter trigger response.\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cimg title=\"Active Braking\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/ab.jpg\" alt=\"Active Braking\" align=\"middle\" border=\"0\" hspace=\"1\" vspace=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eActive Brake\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. The gear set always completes a full cycle. The piston returns to the forward position after each shot, so the gearbox is never left under unnecessary tension. This extends the life of the gearbox components.\u003c\/p\u003e\n\u003cp\u003e2. \u003cb\u003eIncreases realism.\u003c\/b\u003e The brake eliminates double shots and ensures the gun fires exactly as many BBs as the player intends, especially useful for semi-auto users.\u003c\/p\u003e\n\u003cp\u003e\u003cimg title=\"Fuse\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/fuse.jpg\" alt=\"Fuse\" align=\"middle\" border=\"0\"\u003e\u003c\/p\u003e\n\u003cp\u003eProvides protection as follows:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSCP\u003c\/strong\u003e – \u003cem\u003eShort Circuit Protection\u003c\/em\u003e disconnects the battery within milliseconds if a short circuit occurs. \u003cstrong\u003eThis is critical for protecting Li-Po batteries.\u003c\/strong\u003e A shorted Li-Po can cause permanent damage to the gun and the user.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOTP\u003c\/strong\u003e – \u003cem\u003eOver Temperature Protection\u003c\/em\u003e prevents the unit from overheating. A built-in sensor monitors temperature and shuts down the circuit if it exceeds a critical level, avoiding damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUVP\u003c\/strong\u003e – \u003cem\u003eUnder Voltage Protection\u003c\/em\u003e shuts down the circuit if the battery voltage is too low. This prevents over-discharge, which can permanently damage the battery. Especially useful with LiPo batteries.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIf a fault occurs, the fuse activates immediately after the trigger is pulled.\u003c\/strong\u003e On the next pull, the unit evaluates the fault within milliseconds and decides whether to disconnect the battery or continue operation.\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cimg title=\"ROF Control\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/rfc.jpg\" alt=\"ROF Control\" align=\"middle\" border=\"0\" hspace=\"1\" vspace=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eAllows rate of fire adjustment. ROF can be set between 30–100% of the original speed. Reducing ROF does not affect other performance aspects.\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cimg title=\"Smart Trigger\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/st.jpg\" alt=\"Smart Trigger\" align=\"middle\" border=\"0\" hspace=\"1\" vspace=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eEnables shorter trigger response. Works with ROF control by setting the first shot to 100% ROF, then reducing to the preset limit. Best results are achieved with a high-performance battery that would otherwise increase ROF excessively. Smart Trigger lets you enjoy fast trigger response without an unreasonably high full-auto rate of fire.\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cimg title=\"3rd burst\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/3burst.jpg\" alt=\"3rd burst\" align=\"middle\" border=\"0\" hspace=\"1\" vspace=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eUsing burst fire instead of full-auto saves BBs.\u003c\/p\u003e\n\u003cp\u003eIn simple mode, fire selectors (SAFE\/SEMI\/AUTO) are replaced as follows: \u003cstrong\u003e\u003cbr\u003e\n\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn advanced mode:\u003cbr\u003e\na) SAFE\/SEMI\/BURST\u003cbr\u003e\nb) SAFE\/BURST\/AUTO\u003c\/p\u003e\n\u003cp\u003eIf you release the trigger before the 3-round burst completes, the gun stops firing. This means you can fire 1 or 2 shots with quick trigger pulls even in burst mode. Burst duration can be adjusted in 4 ms (0.004s) increments. The unit automatically extends burst time as battery voltage drops and ROF decreases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMERF 3.2:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cem id=\"__mceDel\"\u003eDimensions: \u003cstrong\u003e70mm x 19mm x 10mm\u003c\/strong\u003e\u003cbr\u003e\nWeight: \u003cstrong\u003e15g\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54236478407004,"sku":"GATE-MERF","price":54.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/gate-merf-3.2.jpg?v=1743361229"},{"product_id":"lonex-liipaisinkoneisto-versio-2","title":"Lonex Trigger mechanism, version 2","description":"\u003cp\u003eLonex trigger mechanism for version 2 gearbox.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLonex as a manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"term-description\"\u003e\n\u003cp\u003e\u003cstrong\u003eLonex Technology Co., Ltd\u003c\/strong\u003e was founded in 1980 in Taipei, Taiwan, with its main business focused on plastic injection molds and injection molding services. Later, Lonex began manufacturing airsoft gun parts as well as complete airsoft guns. The company’s first airsoft products were various upgrade parts. Lonex upgrade parts are among the top tier in the airsoft industry. The company has invested heavily in the quality and consistency of its products. As a result, Lonex has obtained the ISO 9001 quality standard and the TL9000 certification, which ensures excellent working conditions. Among the most popular upgrade parts are the manufacturer’s hop-up rubbers, neodymium motors, and cylinder set components.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Lonex","offers":[{"title":"Default Title","offer_id":54236479193436,"sku":"LONEX-GB-01-32","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Lonex-V2-liipasinkoneisto.jpg?v=1743361261"},{"product_id":"lonex-liipaisinkoneisto-versio-3","title":"Lonex Trigger mechanism V3","description":"\u003cp\u003eLonex trigger mechanism for version 3 gearbox.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLonex as a manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"term-description\"\u003e\n\u003cp\u003e\u003cstrong\u003eLonex Technology Co., Ltd\u003c\/strong\u003e was founded in 1980 in Taipei, Taiwan, with its main business focused on plastic injection molds and injection molding services. Later, Lonex began manufacturing airsoft gun parts as well as complete airsoft guns. The company’s first airsoft products were various upgrade parts. Lonex upgrade parts represent the top tier in the airsoft industry. The company has invested heavily in the quality and consistency of its products. As a result of these efforts, Lonex has obtained the ISO 9001 quality standard and the TL9000 certification, which ensures excellent working conditions. Among the most popular upgrade parts are the manufacturer’s hop-up rubbers, neodymium motors, and cylinder set components.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Lonex","offers":[{"title":"Default Title","offer_id":54236479586652,"sku":"LONEX-GB-01-33","price":15.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/lonex-electric-switch-for-gearbox-ver3.jpg?v=1743361272"},{"product_id":"gate-picoaabaeg-mosfet","title":"GATE PicoAAB™AEG MOSFET","description":"\u003cp\u003e\u003cstrong\u003ePicoAAB is the smallest 3rd generation MOSFET with Active Brake. It can operate with 14.8V Li-Poly batteries.\u003c\/strong\u003e The system can be installed in any AEG. It is compatible even with the smallest ASG replicas. Installation is very simple and requires only running one or two additional wires from the contacts, with minimal interference to the replica.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Functions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/mosfet.png\" alt=\"mosfet\"\u003e\u003c\/td\u003e\n\u003ctd\u003eMOSFETDo you want to achieve a higher rate of fire and faster trigger response? Are you planning a power upgrade for your rifle? In that case, you need a MOSFET.\n\u003cp\u003eIt directs energy from the battery straight to the motor, bypassing the mechanical trigger contacts. As a result, you gain a higher rate of fire and faster trigger response, while the contacts are protected from burning out.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/ab.png\" alt=\"ab\"\u003e\u003c\/td\u003e\n\u003ctd\u003eActive BrakeDo you care about realism? Want to extend the life of your gearbox? Does your rifle have such a high rate of fire that you can’t fire a single shot? Active Brake solves these issues.\n\u003cp\u003eIn SEMI mode, the brake prevents the piston from compressing after a shot. The piston stops in the forward position, eliminating unnecessary stress and increasing the service life of the gearbox and its components. This is especially important when upgrading AEG power.\u003c\/p\u003e\n\u003cp\u003eAfter releasing the trigger, the rifle stops firing immediately. This gives you more realism and helps conserve your precious ammunition.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/fuse.png\" alt=\"fuse\"\u003e\u003c\/td\u003e\n\u003ctd\u003eElectronic FuseA new MOSFET will never let you down on the battlefield. It is fully protected against overheating and electrical short circuits. If the rifle becomes jammed, it protects the motor and battery from damage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/ci.png\" alt=\"ci\"\u003e\u003c\/td\u003e\n\u003ctd\u003eDigital InterfaceEnsures full compatibility with micro-switches. Completely resistant to contact bounce. You get higher ROF, faster trigger response, and reduced MOSFET heating.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/m3g.png\" alt=\"m3g\"\u003e\u003c\/td\u003e\n\u003ctd\u003e3rd Generation MOSFETUsing the latest transistors and microcontroller technology allowed us to create the smallest and most reliable MOSFET on the market.\n\u003cp\u003eWE GUARANTEE that the MOSFET will work with the most powerful AEG replicas. If you damage the MOSFET, we will refund 100% of your costs or replace it with a new one at our expense.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54236485648732,"sku":"GATE-PICOAAB","price":47.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/gate-picoaab_E2_84_A2aeg-mosfet.jpg?v=1743361418"},{"product_id":"gate-nanohard-ohjelmoitava-mosfet","title":"GATE NanoHARD programmable MOSFET","description":"\u003cp\u003eGate NanoHARD programmable MOSFET is a multifunctional programmable AEG controller. It offers 8 different functions. NanoHARD features a special coating that withstands atmospheric conditions (Military Specification MIL-V-173C). NanoHARD protects LiPo batteries from undervoltage by cutting off power to the replica. The protection supports the following LiPo batteries:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e7.4V\u003c\/li\u003e\n\u003cli\u003e11.1V\u003c\/li\u003e\n\u003cli\u003e14.8V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFunctions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/on_off_ab.png\" alt=\"on off ab\"\u003e\u003c\/td\u003e\n\u003ctd\u003eON\/OFF ACTIVE BRAKE\n\u003cp\u003eThis is the first controller that gives you the option to turn off the Active Brake. You can enable or disable the Active Brake at any time.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/smart_fuse.png\" alt=\"smart fuse\"\u003e\u003c\/td\u003e\n\u003ctd\u003eSMART FUSE\n\u003cp\u003eThe new AEG Controller is designed to never let you down on the battlefield. It is the best electronic fuse ever made. This is the first AEG Controller with a true current sensor. A combination of current, voltage, and temperature measurements ensures high reliability for your AEG setup. If your rifle becomes jammed, it protects the motor and battery from damage. There is no way to destroy the controller by overheating, overloading, or short-circuiting the electrical system.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/build_in_self_test.png\" alt=\"build in self test\"\u003e\u003c\/td\u003e\n\u003ctd\u003eBUILT-IN SELF-TEST\n\u003cp\u003eAllows you to quickly check whether the AEG Controller is functioning properly. If you experience issues with your AEG, the BUILT-IN SELF-TEST helps confirm that the problem is not caused by the controller.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/mosfet.png\" alt=\"mosfet\"\u003e\u003c\/td\u003e\n\u003ctd\u003eMOSFET\n\u003cp\u003eWant to achieve a higher rate of fire and faster trigger response? Planning a power upgrade for your rifle? In that case, you need a MOSFET.\u003c\/p\u003e\n\u003cp\u003eIt directs energy from the battery straight to the motor, bypassing the mechanical trigger contacts. As a result, you get a higher rate of fire, faster trigger response, and the contacts are protected from burning out.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/battery_protection.png\" alt=\"battery protection\"\u003e\u003c\/td\u003e\n\u003ctd\u003eProtection Against Over-Discharge of Battery\n\u003cp\u003eModern LiPo batteries are very sensitive to over-discharge. If you want to avoid damaging the battery and care about its lifespan, this protection is essential. The microprocessor constantly monitors battery voltage. When it drops to a critical level, it will prevent firing.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/debouncing.png\" alt=\"debouncing\"\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003eDebouncing\n\u003cp\u003eProvides full compatibility with micro-switches. Fully resistant to contact bounce. You gain higher ROF, faster trigger response, and your MOSFET is less prone to heating.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/m3g.png\" alt=\"m3g\"\u003e\u003c\/td\u003e\n\u003ctd\u003e3rd Generation MOSFET\n\u003cp\u003eUsing modern transistors and a microcontroller has allowed us to create the smallest and most reliable AEG Controller on the market.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/lipo_rdy.png\" alt=\"lipo rdy\"\u003e\u003c\/td\u003e\n\u003ctd\u003e14.8V LI-PO READY\n\u003cp\u003eThe system can be used with batteries up to LiPo 14.8V. Minimum operating voltage is 3V and maximum voltage is 17V.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"0\" cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\u003cimg src=\"http:\/\/gatee.eu\/images\/gate\/dodatki\/conf.png\" alt=\"conf\"\u003e\u003c\/td\u003e\n\u003ctd\u003eCoating\n\u003cp\u003eThanks to its special coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cpre id=\"tw-target-text\" class=\"tw-data-text vk_txt tw-ta tw-text-small\"\u003e\u003c\/pre\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54236495839580,"sku":"GATE-NHARD","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/nanohard1.jpg?v=1743361702"},{"product_id":"shs-liipaisinkoneisto-v2","title":"SHS Trigger mechanism, version 2","description":"\u003cp\u003eSHS trigger mechanism, version 2 for gearboxes.\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":54236505440604,"sku":"5902543117250","price":4.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/shs-liipaisinkoneisto-versio-2-4.jpg?v=1743362085"},{"product_id":"gate-usb-linkki-titan-ja-aster-mosfet-yksikolle","title":"GATE USB link for TITAN and ASTER MOSFET unit","description":"\u003cp\u003eThe GATE USB-Link allows you to connect your \u003ca href=\"https:\/\/www.atom-airsoft.fi\/https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2021\/08\/186564321_753392202012429_5501954215246231936_n-1.jpg\/?s=TITAN\u0026amp;post_type=product\u0026amp;filter_valmistaja=gate\u0026amp;query_type_valmistaja=or\"\u003eTITAN\u003c\/a\u003e and \u003ca href=\"https:\/\/www.atom-airsoft.fi\/https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2021\/08\/186564321_753392202012429_5501954215246231936_n-1.jpg\/?s=ASTER\u0026amp;post_type=product\u0026amp;filter_valmistaja=gate\u0026amp;query_type_valmistaja=or\"\u003eASTER\u003c\/a\u003e MOSFET units to a computer or smartphone and program them using the GATE Control Station™ app.\u003c\/p\u003e\n\u003cp\u003eThis product is compatible with GATE ASTER and TITAN units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSB-Link\u003c\/li\u003e\n\u003cli\u003eMicro USB cable\u003c\/li\u003e\n\u003cli\u003eEnglish quick-start guide for GATE Control Station™\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEasily update your TITAN\/ASTER firmware to the latest version or adjust your unit’s settings. The USB-Link works with the GATE Control Station™ app, giving you full access to configure and update your TITAN\/ASTER unit.\u003c\/p\u003e\n\u003cp\u003eFor more information about the GATE Control Station app, click \u003ca href=\"https:\/\/gatee.eu\/software\/gcs\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54236540076380,"sku":"GATE-USB-L2","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/USB-Link-new-top-1600.jpg?v=1743363371"},{"product_id":"jefftron-processor-unit-v2-with-wiring","title":"Jefftron Processor unit - V2 with wiring","description":"\u003cp\u003eJeffTron Processor Unit V2 - wired version is a directly gearbox-installed and programmable MOSFET microcontroller. With the V2 version, you get all the features of the JeffTron Processor Unit and a trigger equipped with a micro switch in one package, without the need to install any additional circuit outside the gearbox!\u003c\/p\u003e\n\u003cp\u003eThe unit provides new firing modes, rate of fire control, pre-cocking, active braking, and a low-voltage battery warning indicator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain Features:\u003c\/strong\u003e\u003cbr\u003e\n- Five new firing mode options – new combinations of semi, burst, and full-auto\u003cbr\u003e\n- Adjustable burst fire (factory setting is 3-round burst, adjustable from 1 to 10 rounds)\u003cbr\u003e\n- Smooth rate of fire adjustment using PWM motor control technology\u003cbr\u003e\n- Pre-cocking function for instant semi-auto response\u003cbr\u003e\n- Option for fast semi-auto limit\u003cbr\u003e\n- MOSFET with active brake for the motor\u003cbr\u003e\n- Adjustable active brake strength, can also be disabled\u003cbr\u003e\n- LiPo battery protection: for 2S Li-pol, 3S Li-pol, 3S Li-fe, 3S Li-on, 4S Li-pol, and 4S Li-fe packs\u003cbr\u003e\n- Monitors current, voltage, and processor component temperature\u003cbr\u003e\n- Trigger is used for programming; settings are indicated by motor vibration\u003cbr\u003e\n- Programmed settings are stored in the processor unit’s memory and remain saved even when the battery is disconnected\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFire Modes:\u003c\/strong\u003e\u003cbr\u003e\n- Safe - Semi – Auto (factory setting)\u003cbr\u003e\n- Safe - Semi - Semi\/Burst\/Auto\u003cbr\u003e\n- Safe - Semi - Semi\u003cbr\u003e\n- Safe - Semi - Semi\/Burst\u003cbr\u003e\n- Safe - Semi - Semi (delay between shots, motor vibrates when ready to fire)\u003cbr\u003e\n- Safe - Burst - Burst\/Auto\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\n- Wired version, supports max. 1.5 mm² (AWG16) power wires and 0.5 mm² (AWG21) signal wires\u003cbr\u003e\n- If you are not experienced in soldering wires to a PCB, choose the pre-wired model!\u003cbr\u003e\n- Designed for up to M180 spring and max. 25 RPS rate of fire. For heavier builds, we recommend the Extreme version! (Installed outside the gearbox!)\u003cbr\u003e\n- For proper function, the gun must have a working cut-off lever, selector plate, reverse latch, trigger, and safety – the same parts originally found in the gearbox.\u003cbr\u003e\n- Designed to handle up to 17 V nickel batteries (Ni-xx 8.4V - 14.4V, Li-pol 7.4V - 14.8V, Li-fe 9.9V - 13.2V)\u003cbr\u003e\n- Idle current draw is only 4.5 mA\u003cbr\u003e\n- Increases rate of fire and battery life compared to standard wiring\u003cbr\u003e\n- With active brake, the gun never stays cocked in semi-auto, reducing stress on gearbox parts\u003cbr\u003e\n- Solves double-shot issues in high-rate-of-fire builds thanks to active braking\u003cbr\u003e\n- Braking is most effective with high torque motors\u003cbr\u003e\n- In full-auto, the piston stops in a random position; the brake stops piston movement immediately\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS:\u003c\/strong\u003e You can download the English manual \u003ca title=\"Manual\" href=\"https:\/\/www.jefftron.net\/upload\/navod\/manual_processor_unit-v2.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e PDF, 689.55 kB\u003cbr\u003e\n\u003cstrong\u003ePACKAGE INCLUDES:\u003c\/strong\u003e The unit itself, heat shrink tubing, and an English installation manual.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING! Installation should be done by a professional who can make \u003cem\u003ehigh-quality\u003c\/em\u003e solder joints and repair airsoft guns!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWiring diagram to the rear:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/procesorovka-v2_pazba.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWiring diagram to the front:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/procesorovka-v2_predpazbi.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/product_chart.png\"\u003e\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54236541059420,"sku":"JT-PRO-I2","price":72.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/jefftron-processor-unit-v2-with-wiring.jpg?v=1743363412"},{"product_id":"gate-titan-v3-expert-mosfet-mikrokontrolleriyksikko","title":"GATE TITAN V3 Expert MOSFET\/Microcontroller Unit","description":"\u003cp\u003e\u003cstrong\u003eTITAN V3™ Expert\u003c\/strong\u003e is a high-end version designed for version 3 gearboxes. This model comes pre-installed with the Gate Expert firmware, offering a wide range of features to satisfy even the most demanding airsoft tuners.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMOSFET circuit\u003c\/li\u003e\n\u003cli\u003eAdjustable trigger sensitivity\u003c\/li\u003e\n\u003cli\u003eAdaptive and adjustable active brake\u003c\/li\u003e\n\u003cli\u003e6 different fire selector modes\u003c\/li\u003e\n\u003cli\u003eAdjustable burst fire\u003c\/li\u003e\n\u003cli\u003eOption for \"Semi-Only\" mode, allowing only semi-auto fire\u003c\/li\u003e\n\u003cli\u003eAdjustable pre-cocking\u003c\/li\u003e\n\u003cli\u003eAdjustable rate of fire\u003c\/li\u003e\n\u003cli\u003eAdjustable trigger delay (\"Sniper Delay\")\u003c\/li\u003e\n\u003cli\u003eSmart trigger\u003c\/li\u003e\n\u003cli\u003eTwo-stage trigger (AUG mode)\u003c\/li\u003e\n\u003cli\u003eComprehensive battery protection features\u003c\/li\u003e\n\u003cli\u003eAutomatic fuse\u003c\/li\u003e\n\u003cli\u003eOverheat protection\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection\u003c\/li\u003e\n\u003cli\u003eNominal voltage range 7.2V – 14.8V (absolute minimum and maximum 3V – 17V)\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003cli\u003eDEANS connector\u003c\/li\u003e\n\u003cli\u003eEasy to install and program (installation requires experience with airsoft gearboxes)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eGATE TITAN™ V3 unit with Expert firmware\u003c\/li\u003e\n\u003cli\u003eInstallation accessories\u003c\/li\u003e\n\u003cli\u003eQuickstart guide\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch1\u003e\n\u003cstrong\u003eAdjustable Features\u003c\/strong\u003e\n\u003c\/h1\u003e\n\u003ch4\u003eThe microcontroller-based circuit with optical sensors allows the TITAN unit to be customized to match the user’s preferences.\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable trigger sensitivity. The circuit measures the trigger position with an optical sensor, and the user can set the trigger pull length.\u003c\/li\u003e\n\u003cli\u003eAdjustable rate of fire. Thanks to adjustable ROF, you can take advantage of the extremely short semi-auto delay provided by an 11.1V or 14.8V battery while keeping full-auto fire at a moderate level. ROF adjustment can be done via PWM or by adding delays between shots.\u003c\/li\u003e\n\u003cli\u003eAdjustable fire selector. Fire selector positions can be configured based on the replica type from the following options: AK (safe, auto, semi), G36 (safe, semi, auto), and AUG mode (fire selector disabled).\u003c\/li\u003e\n\u003cli\u003e3 different fire selector modes - Safe-semi-auto, safe-semi-semi, safe-semi-burst\u003c\/li\u003e\n\u003cli\u003eThe circuit allows a \"semi-only\" setting, making it easy to configure the replica for semi-auto only without mechanical modifications to the gearbox.\u003c\/li\u003e\n\u003cli\u003eGear and motor monitoring. Prevents semi-lock and ensures the gearbox completes a full cycle.\u003c\/li\u003e\n\u003cli\u003eTwo-stage trigger setting (so-called \"AUG mode\"). In AUG mode, the replica can fire semi-auto with a short pull and full-auto with a longer pull.\u003c\/li\u003e\n\u003cli\u003eAdaptive active brake. The TITAN unit detects the optimal braking point and automatically adjusts braking force.\u003c\/li\u003e\n\u003cli\u003eBattery protection features prevent excessive discharge of LiPo batteries. The undervoltage protection can be adjusted for different battery types and voltages (compatible nominal voltages per cell: 2.7V, 2.9V, 3.2V, or 3.4V).\u003c\/li\u003e\n\u003cli\u003eAutomatic fuse - overvoltage protection - temperature monitoring. The TITAN unit protects the circuit and motor from short circuits, overload, and overheating.\u003c\/li\u003e\n\u003cli\u003eSelf-test (TITAN self-test). TITAN checks the condition of the electrical components every time the battery is connected and continues monitoring during use, storing any errors as fault codes. Fault codes help identify gearbox issues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"jsx-1614899726 diff-chunk diff-chunk-equal\"\u003eEasy to program. Settings and features can be adjusted\u003c\/span\u003e\u003cspan class=\"jsx-1614899726 diff-chunk diff-chunk-removed\"\u003e via USB-link or BLUE-link using a phone or computer.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eGate continuously develops the product. New features are regularly released and can be updated via USB-link.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMore Information:\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.gatee.eu\/products\/titan\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eManufacturer's website\u003c\/a\u003e\u003c\/p\u003e","brand":"GATE","offers":[{"title":"Default Title","offer_id":54236557803868,"sku":"5902020754558","price":119.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/ttn-top-1920.webp?v=1743363893"},{"product_id":"gate-valijohto-deans-liittimilla-mm-titan-mosfet-yksikolle","title":"GATE Intermediate cable with Deans connectors for TITAN MOSFET units, among others","description":"\u003cp\u003eNominally, the extension cable is designed for the V3 TITAN unit to allow the battery to be placed in the stock. However, nothing prevents using the extension cable in any gun where additional length is needed between two Deans connectors.\u003c\/p\u003e\n\u003cp\u003eThe extension cable length is approximately 33 cm including the connectors.\u003c\/p\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54236624355676,"sku":"GATE-V3-EXT","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/gate-valijohto-deans-liittimilla-mm.-titan-mosfet-yksikolle-2.jpg?v=1743364782"},{"product_id":"shs-liipaisinkoneisto-versio-3","title":"SHS Trigger mechanism V3","description":"\u003cp\u003e SHS trigger mechanism, version 3\u003c\/p\u003e","brand":"SHS","offers":[{"title":"Default Title","offer_id":54236675899740,"sku":"5902543117243","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/shs-liipaisinkoneisto-versio-3-2.jpg?v=1743365670"},{"product_id":"jefftron-mosfet-v2","title":"Jefftron Mosfet - V2","description":"\u003cp\u003eJefftron Mosfet - V2 integrates an extremely small MOSFET directly onto the Version 2 mechanical switch contacts, allowing the MOSFET to be installed entirely inside the gearbox with ease. The circuit prevents arcing that occurs in traditional mechanical trigger systems, which eventually leads to carbonized switch contacts. It reduces the electrical resistance compared to a mechanical switch, allowing the motor to draw more power from the battery. Lower resistance makes the electrical system more efficient, resulting in higher rate of fire and reduced trigger response time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\n\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMOSFET integrated with SHS-manufactured V2 switch contacts\u003c\/li\u003e\n\u003cli\u003eEasy to install in all V2 gearboxes\u003c\/li\u003e\n\u003cli\u003eUse a maximum of 1.5qmm (AWG16) power wires and 25qmm (AWG21) signal wire\u003c\/li\u003e\n\u003cli\u003eDesigned for continuous use with up to 25A current. For heavy builds, we recommend the \u003ca href=\"https:\/\/www.atom-airsoft.fi\/tuote\/jefftron-mosfet-ii-johdotettuna\/\"\u003eMosfet II circuit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eCompatible with all batteries up to 17 V (Ni-xx 8.4V – 14.4V, LiPo 7.4V – 14.8V, LiFe 9.9V – 13.2V)\u003cbr\u003e\n\u003cstrong\u003eD CIRCUIT INSTRUCTIONS: You can download the English manual \u003c\/strong\u003e\u003ca title=\"manual mosfet-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_mosfet-v2.pdf\"\u003ehere\u003c\/a\u003e \u003cpdf kb\u003e\u003c\/pdf\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWARNING! Installation should be performed by a professional who can make \u003cem\u003ehigh-quality\u003c\/em\u003e solder joints and is experienced in repairing airsoft guns! \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003eWiring example:\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-v2.png\" alt=\"\"\u003e\u003cimg class=\"center\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/product_chart.png\" alt=\"tabulka_produktu\"\u003e\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54236932309340,"sku":"660902437436","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-v2-front.jpg?v=1743370412"},{"product_id":"jefftron-mosfet-v3-johdotus-rataslaatikon-paalle","title":"Jefftron Mosfet - V3, wiring on top of the gearbox","description":"\u003cp\u003eJefftron Mosfet – V3 combines an extremely compact mosfet directly with Version 3 mechanical switch contacts, allowing the mosfet to be installed entirely inside the gearbox with ease. The circuit prevents arcing that occurs in traditional mechanical trigger systems, which eventually leads to carbonized contact surfaces. It reduces the electrical resistance compared to a mechanical switch, allowing the motor to draw more power from the battery. Lower resistance makes the electrical system more efficient, resulting in higher rate of fire and reduced trigger response time.\u003c\/p\u003e\n\u003cp\u003eThe package includes suitable connectors for the motor and fuse, as well as heat shrink tubing. In addition, a highly conductive T-connector (Deans) is included for battery connection. The connectors are separate and require soldering to the wires during installation. In the wired version, the wires connected to the circuit itself are pre-soldered to simplify assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\n\u003c\/strong\u003e– Mosfet integrated with SHS-manufactured V3 switch contacts\u003cbr\u003e\n– Easy to install in all Marui V3-compatible gearboxes\u003cbr\u003e\n– Pre-soldered wires on the circuit for easier assembly. \u003cstrong\u003eNOTE!\u003c\/strong\u003e Battery, motor, and fuse connectors are not pre-installed!\u003cbr\u003e\n– Circuit coated with a transparent varnish for moisture protection.\u003cbr\u003e\n– Designed to withstand up to 75A current spikes and 25A continuous current. For heavy builds, we recommend the JeffTron \u003cstrong\u003eMosfet II\u003c\/strong\u003e circuit.\u003cbr\u003e\n– Compatible with all batteries up to 17 V (Ni-xx 8.4V – 14.4V, LiPo 7.4V – 14.8V, LiFe 9.9V – 13.2V)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCIRCUIT MANUAL: You can download the English manual \u003c\/strong\u003e\u003ca title=\"manual mosfet-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_mosfet-v3-above-gearbox.pdf\"\u003ehere\u003c\/a\u003e \u003cpdf kb\u003e\u003c\/pdf\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWARNING! Installation should be performed by a professional who can make \u003cem\u003ehigh-quality\u003c\/em\u003e solder joints and is experienced in repairing airsoft guns! Poor soldering and connections increase the load on the circuit and may cause damage.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cimg class=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-v3_nad_mechabox.png\" width=\"676\" height=\"680\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/product_chart.png\" alt=\"tabulka_produktu\" width=\"811\" height=\"560\"\u003e\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54236933816668,"sku":"0660902437566","price":38.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-v3-nad-mech-1.jpg?v=1743370427"},{"product_id":"jefftron-mosfet-ii-johdotettuna","title":"Jefftron Mosfet II, wired","description":"\u003cp\u003eMosfet II is a MOSFET unit designed by professionals for heavy AEG upgrades. The MOSFET improves the replica’s rate of fire and battery life.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Factory-preinstalled wires for easier installation. The wires are long enough for any airsoft replica. Cut the wires to the desired length and attach the included connectors.\u003cbr\u003e\n- Power wire specification: 1.5qmm (AWG16)\u003cbr\u003e\n- Signal wire specification: 0.25qmm (AWG24)\u003cbr\u003e\n- The circuit is coated with lacquer for moisture protection\u003cbr\u003e\n- Designed to withstand the load generated by an M210 spring (up to 150A current spikes or 50A continuous current, for a maximum of 30 seconds at a time)\u003cbr\u003e\n- Compatible with all batteries up to 17 V (NiMh 8.4V – 14.4V, LiPo 7.4V – 14.8V, LiFe 9.9V – 13.2V)\u003cbr\u003e\n- Circuit dimensions: 25x12x7mm\u003cbr\u003e\n- No power consumption in standby\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCircuit manual:\u003c\/strong\u003e You can download the English manual \u003ca href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_mosfet-II-kab.pdf\"\u003ehere\u003c\/a\u003e \u003cpdf kb\u003e\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003e\nPackage Includes:\u003c\/strong\u003e\u003cbr\u003e\n- MOSFET unit with wires\u003cbr\u003e\n- Deans T male connector\u003cbr\u003e\n- 30A mini fuse\u003cbr\u003e\n- 4x 2.8mm female spade connectors\u003cbr\u003e\n- 6x black heat shrink tubing pieces 3.2mm - length 20mm\u003cbr\u003e\n- 3x black heat shrink tubing pieces 4.8mm - length 20mm\u003cbr\u003e\n- English installation manual\u003c\/pdf\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWARNING! Installation should be performed by a professional who can make \u003cem\u003ehigh-quality\u003c\/em\u003e solder joints and is experienced in repairing airsoft replicas! Poor soldering and connections increase the load on the circuit and may cause damage.\u003c\/strong\u003e\u003c\/h3\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54236935061852,"sku":"660902437481","price":34.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-ii-kab.jpg?v=1743370439"},{"product_id":"jefftron-mosfet-ii","title":"Jefftron Mosfet II","description":"\u003cp\u003eMosfet II is a MOSFET unit designed by professionals for heavy AEG upgrades. The MOSFET improves the replica’s rate of fire and battery efficiency.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003cbr\u003e\n\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Supports power wires up to 1.5qmm (AWG16)\u003cbr\u003e\n- Supports signal wires up to 0.25qmm (AWG24)\u003cbr\u003e\n- Circuit coated with lacquer for moisture protection\u003cbr\u003e\n- Designed to handle the load generated by an M210 spring (up to 150A current spikes or 50A continuous current, for a maximum of 30 seconds at a time)\u003cbr\u003e\n– Compatible with all batteries up to 17 V (NiMh 8.4V – 14.4V, LiPo 7.4V – 14.8V, LiFe 9.9V – 13.2V)\u003cbr\u003e\n- Circuit dimensions: 25x12x7mm\u003cbr\u003e\n- No power consumption in standby\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCircuit instructions:\u003c\/strong\u003e You can download the English manual \u003ca href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_mosfet-II-kab.pdf\"\u003ehere\u003c\/a\u003e \u003cpdf kb\u003e\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003e\nPackage Includes:\u003c\/strong\u003e\u003cbr\u003e\n- MOSFET unit\u003cbr\u003e\n- Heat shrink tubing for the circuit\u003cbr\u003e\n- English installation manual\u003c\/pdf\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWARNING! Installation should be performed by a professional capable of making \u003cem\u003ehigh-quality\u003c\/em\u003e solder joints and experienced in repairing airsoft replicas! Poor soldering and connections increase the load on the circuit and may cause damage.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cimg class=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet_ii_en.png\" width=\"700\" height=\"301\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/product_chart.png\" alt=\"tabulka_produktu\" width=\"711\" height=\"490\"\u003e\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54236936274268,"sku":"660902437474","price":21.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-ii-top_1_db4a1ef7-0e4c-4b97-9d75-5940ede57db1.jpg?v=1743370451"},{"product_id":"atom-custom-liipaisinkoneisto-versio-2","title":"Atom Airsoft Trigger mechanism, version 2","description":"\u003cp\u003e Atom Custom trigger mechanism, version 2 trigger mechanism engagement surfaces suitable for gearboxes. The mechanism is designed to fit all Marui compatible version 2 gearboxes.\u003c\/p\u003e","brand":"Atom Airsoft","offers":[{"title":"Default Title","offer_id":54236938240348,"sku":"ACVERS2790","price":7.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/DSC_5607.jpg?v=1743370476"},{"product_id":"atom-custom-liipaisinkoneisto-versio-3","title":"Atom Airsoft Trigger mechanism, version 3","description":"\u003cp\u003e Atom Custom trigger mechanism, version 3 trigger mechanism engagement surfaces suitable for gearboxes. The mechanism is designed to fit all Marui compatible version 3 gearboxes.\u003c\/p\u003e","brand":"Atom Airsoft","offers":[{"title":"Default Title","offer_id":54236939714908,"sku":"ACVERS3790","price":7.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/DSC_5598.jpg?v=1743370490"},{"product_id":"jefftron-leviathan-v2-optinen-johdotus-taakse-cnc-liipaisin","title":"Jefftron Leviathan V2, optical (rear wiring + CNC trigger)","description":"\u003cp\u003eThe Jefftron Leviathan V2 Optical is one of the most advanced microprocessor-controlled ETU (electronic trigger unit) boards on the airsoft market. The Jefftron Leviathan V2 Optical monitors the gear position in real time using \u003cstrong\u003etwo optical sensors\u003c\/strong\u003e. The Leviathan unit can be easily programmed via \u003cstrong\u003eBluetooth\u003c\/strong\u003e using a smartphone (iOS or Android).\u003c\/p\u003e\n\u003cp\u003eThe included CNC-machined aluminum adjustable special trigger allows you to set the trigger pull to as little as \u003cstrong\u003e0.13mm\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003eThe V2 designation means this unit is compatible with all electric airsoft guns using a version 2 gearbox. Leviathan adds a wide range of new features to your AEG and improves existing functions. With this unit, you can control your gun’s fire modes, rate of fire (ROF), pre-cocking, active braking, protect LiPo\/LiFe batteries from over-discharge, and much more.\u003c\/p\u003e\n\u003cp\u003eThe Leviathan unit is fully installed inside the version 2 gearbox, replacing the traditional trigger switch assembly. The unit comes pre-wired with complete wiring, including a 40A mini fuse and Deans\/T-connectors. No soldering is required during installation!\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eWhat features does the Leviathan unit provide?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust and add all fire modes to any selector position (SAFE - SEMI - AUTO).\u003c\/li\u003e\n\u003cli\u003eThree different burst fire modes. Each burst length adjustable between 2 - 20 rounds.\u003c\/li\u003e\n\u003cli\u003eOption to stop firing when the magazine is empty. Magazine change can be signaled to the gun via an additional switch (sold separately).\u003c\/li\u003e\n\u003cli\u003eLimit the rate of fire by adding pauses between shots while maintaining an extremely fast trigger response, even when reducing full-auto speed via software.\u003c\/li\u003e\n\u003cli\u003eAdjustable active brake strength, which can also be disabled.\u003c\/li\u003e\n\u003cli\u003e\"Pre-cocking\" function for instant, delay-free semi-auto shots.\u003c\/li\u003e\n\u003cli\u003eOption to add a delay between shots to simulate the effect of recoil on firing speed. Delay adjustable between 0.1 - 4 seconds.\u003c\/li\u003e\n\u003cli\u003eLow voltage warning for LiPo or LiFe batteries. Works with 2S - 4S LiPo and 3S - 4S LiFe batteries.\u003c\/li\u003e\n\u003cli\u003eUser can save multiple configuration profiles.\u003c\/li\u003e\n\u003cli\u003eSoftware displays actual battery voltage with a color-coded indicator for charge level.\u003c\/li\u003e\n\u003cli\u003eThree separate shot counters: total lifetime shots, user-resettable counter, and one that resets when the battery is disconnected.\u003c\/li\u003e\n\u003cli\u003eError log records all errors during the unit’s lifetime.\u003c\/li\u003e\n\u003cli\u003eLeviathan V2 monitors current, voltage, and temperature, protecting components from damage in case of failure.\u003c\/li\u003e\n\u003cli\u003eMotor vibrates and beeps to provide feedback to the user.\u003c\/li\u003e\n\u003cli\u003eProgramming settings are saved in real time to the Leviathan V2 memory unit, so you won’t lose settings if Bluetooth disconnects or the battery is removed during adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProgrammable fire modes:\u003cbr\u003e\n\u003c\/strong\u003e\u003cem\u003eEach of the modes below can be assigned to any selector position (SAFE - SEMI - AUTO).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAFE: Trigger pull does nothing, gun is on safe.\u003c\/li\u003e\n\u003cli\u003eSEMI: Fires one shot per trigger pull.\u003c\/li\u003e\n\u003cli\u003eSEMI\/BurstX: Short pull fires one shot, long pull fires a preset burst.\u003c\/li\u003e\n\u003cli\u003e\"Double trigger\": Fires once on pull and once on release (two shots per trigger cycle).\u003c\/li\u003e\n\u003cli\u003eBurstX: Fires a burst with one trigger pull.\u003c\/li\u003e\n\u003cli\u003eBurstX\/BurstY: Short pull fires burstX, long pull fires burstX followed by burstY.\u003c\/li\u003e\n\u003cli\u003eBurstX\/Full: Short pull fires burstX, long pull fires full-auto.\u003c\/li\u003e\n\u003cli\u003eFull: Fires full-auto as long as the trigger is held.\u003c\/li\u003e\n\u003cli\u003eVirtual reload: Pull the trigger to virtually reload the magazine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes CNC-machined trigger with adjustable travel via set screw.\u003c\/li\u003e\n\u003cli\u003eElectronic board coated with lacquer for water protection.\u003c\/li\u003e\n\u003cli\u003ePre-cocking function requires an anti-reversal latch to prevent gear rollback.\u003c\/li\u003e\n\u003cli\u003eDesigned to operate with batteries up to 17V. Compatible with 8.4 - 12V NiMH and 7.4 - 14.8V lithium-based batteries.\u003c\/li\u003e\n\u003cli\u003eParts removed from gearbox during installation: cut-off lever, original trigger, switch contacts, and safety parts. Original trigger can still be used with the Leviathan board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLeviathan manual:\u003c\/strong\u003e Download the installation and user manual \u003ca title=\"manual_leviathan-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_leviathan-V2_optical.pdf\"\u003eHERE\u003c\/a\u003e \u003cpdf mb englanti\u003e\u003c\/pdf\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownload the Leviathan app:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.jefftron.net\/application\"\u003ehttps:\/\/www.jefftron.net\/application\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003cbr\u003e\n- Leviathan V2 Optical with rear wiring. Wiring includes Deans\/T-connector and 40A fuse slot. Motor wires with standard motor connectors.\u003cbr\u003e\n- CNC-machined black trigger with adjustable travel.\u003cbr\u003e\n- Screw set for securing Leviathan inside the gearbox.\u003cbr\u003e\n- Foam pad for Leviathan installation.\u003cbr\u003e\n- English installation guide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY INSTRUCTIONS:\u003c\/strong\u003e\u003cbr\u003e\n- Installing the unit inside a gearbox requires knowledge and skill in airsoft gun mechanics.\u003cbr\u003e\n- Read the manual before installation to avoid damage!\u003cbr\u003e\n- Short circuit or incorrect battery connection will immediately destroy the unit! Incorrect wiring voids warranty and may cause battery explosion!\u003cbr\u003e\n- Always disconnect the battery when the gun is not in use! Otherwise, the unit may slowly drain the battery, rendering it unusable. When connected, Leviathan draws a small standby current.\u003cbr\u003e\n- Always ensure the barrel is pointed in a safe direction before connecting the battery!\u003cbr\u003e\n- Do not modify, repair, expose the Leviathan V2 board to liquids or heat.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=ReY-9nVii8Q\u003c\/p\u003e\n\u003ch2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/leviathan-v2_optical_scheme_stock.png\"\u003e\u003cimg style=\"color: #333333; font-size: 16px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/leviathan.png\" alt=\"Leviathan banner\"\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237009838428,"sku":"JEF1152239456","price":159.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/leviathan-v2-optical.jpg?v=1763408597"},{"product_id":"jefftron-aep-mosfet-johdotettuna","title":"Jefftron AEP Mosfet wired","description":"\u003cp\u003eThe AEP Mosfet is a professionally manufactured mosfet circuit designed for upgrading electric airsoft pistols (AEP). The mosfet improves the replica’s rate of fire and battery life.\u003c\/p\u003e\n\u003cp\u003eThe AEP Mosfet fits the following models without modifying the electric pistol: CM.030 (G18C), CM.121 (Desert Eagle), CM.122 (SIG P226), CM.123 (Colt M1911), CM.125 (H\u0026amp;K USP), CM.126 (Beretta M92F), CM.127 (Phantom), CM.128 (Hi-Capa 5.1), Tokyo Marui G18C AEP, Tokyo Marui Beretta M93R AEP, Tokyo Marui Beretta M9A1 AEP, Tokyo Marui HK USP AEP, Umarex HK USP AEP, Double Eagle M81 USP.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eRecommended battery: \u003c\/b\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/tuote\/turnigy-nano-tech-plus-300mah-7-4v-lipo-akku-70-140c-jst-liitin\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTurnigy Nano-Tech Plus 300mAh 7.4v LiPo battery 70-140C\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003cbr\u003e\n\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMosfet improves the replica’s rate of fire and battery life\u003c\/li\u003e\n\u003cli\u003eVery compact circuit – AEP mosfet uses Micro mosfet II\u003c\/li\u003e\n\u003cli\u003ePower wire specs: 1.5qmm (AWG16)\u003c\/li\u003e\n\u003cli\u003eSignal wire specs: 0.25qmm (AWG24)\u003c\/li\u003e\n\u003cli\u003ePre-wired circuit allows very quick and easy installation\u003c\/li\u003e\n\u003cli\u003eCircuit coated with lacquer for moisture protection\u003c\/li\u003e\n\u003cli\u003eMosfet can be used with any AEP upgrade as it is designed to handle the load generated by an M160 spring (up to 75A current spikes or 25A continuous current, maximum 30 seconds at a time)\u003c\/li\u003e\n\u003cli\u003eDesigned to work with all batteries up to 17 V (NiMh 8.4V – 14.4V, LiPo 7.4V – 14.8V, LiFe 9.9V – 13.2V)\u003c\/li\u003e\n\u003cli\u003eCircuit dimensions: 15x7x5mm\u003c\/li\u003e\n\u003cli\u003eNo power consumption in idle mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCircuit instructions:\u003c\/strong\u003e You can download the English manual \u003ca href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_mosfet-AEP.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e \u003cpdf kb\u003e\u003cbr\u003e\n\u003cstrong\u003e\u003cbr\u003e\nPackage Includes:\u003c\/strong\u003e\u003cbr\u003e\n- Mosfet circuit pre-wired with JST connector\u003cbr\u003e\n- English installation manual\u003c\/pdf\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWARNING! Installation should be done by a professional who can make \u003cem\u003ehigh-quality\u003c\/em\u003e solder joints and is experienced in repairing airsoft replicas! Poor soldering and connections increase the load on the circuit and may cause damage.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/wp-content\/uploads\/2019\/04\/aep_mosfet-1.png\"\u003e\u003cimg class=\"aligncenter wp-image-312997 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/aep_mosfet-1-1024x767.png\" alt=\"\" width=\"1024\" height=\"767\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/wp-content\/uploads\/2019\/04\/product_chart.png\"\u003e\u003cimg class=\"aligncenter wp-image-312994 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/product_chart-1024x728.png\" alt=\"\" width=\"1024\" height=\"728\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237031727452,"sku":"660902437597","price":19.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/aep-mosfet.jpg?v=1743371841"},{"product_id":"gate-x-asr-mosfet-piiri","title":"GATE X-ASR MOSFET circuit","description":"\u003cp\u003eGate X-ASR is the first 4th generation MOSFET circuit on the airsoft market, featuring reverse polarity protection. In other words, the X-ASR MOSFET is protected against incorrect connection of the battery’s positive and negative terminals to the MOSFET circuit. The X-ASR’s built-in automatic fuse and extremely compact size save space in the airsoft gun’s battery compartment. The X-ASR’s features improve the safety and durability of the electric gun in case of failure, as the X-ASR detects malfunctions using its built-in self-test function and notifies the user with an error code via two LEDs.\u003c\/p\u003e\n\u003cp\u003eX-ASR is a versatile MOSFET circuit designed for use with springs up to M120. When paired with higher torque gears or a stronger motor, the X-ASR MOSFET can also be used with heavier springs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eX-ASR Special Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in fuse – allows you to remove the bulky standard fuse from the AEG’s electrical system\u003c\/li\u003e\n\u003cli\u003eAutomatic fuse protects the motor from gearbox lock-up and the MOSFET from short circuits\u003c\/li\u003e\n\u003cli\u003eOverheat protection – safeguards the MOSFET from overly heavy AEG setups\u003c\/li\u003e\n\u003cli\u003eAutomatic reverse polarity protection – protects the MOSFET and other components from incorrect battery connection\u003c\/li\u003e\n\u003cli\u003eBuilt-in gun condition test program – “self-test” indicates possible faults with two LED lights when an issue occurs\u003c\/li\u003e\n\u003cli\u003eDurable protective coating – meets the MIL-V-173C standard for military-grade electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eX-ASR MOSFET unit\u003c\/li\u003e\n\u003cli\u003eInstallation instructions and accessories\u003c\/li\u003e\n\u003cli\u003e“X-ASR Troubleshooting Card” – error code reference card\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ctable cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"100\"\u003e\u003cimg src=\"https:\/\/www.gatee.eu\/images\/gate\/produkty\/titan\/icon-sma-fus.png\"\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cstrong\u003eSMART AUTOMATIC FUSE\u003c\/strong\u003e\n\u003cp\u003eAn intelligent electronic fuse equipped with voltage, current, and temperature sensors. The fuse continuously monitors the current, voltage, and temperature of the circuit. It protects the system from overload and automatically cuts power in case of a fault or excessive load.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"100\"\u003e\u003cimg src=\"https:\/\/www.gatee.eu\/images\/gate\/produkty\/titan\/icon-mosfet.png\"\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cstrong\u003eMOSFET\u003c\/strong\u003e\n\u003cp\u003eWant short semi-auto response and a high rate of fire from your airsoft gun? A MOSFET circuit improves exactly these features!\u003c\/p\u003e\n\u003cp\u003eThe MOSFET directs power straight from the battery to the motor, bypassing mechanical switch contacts. This reduces electrical resistance in the gun’s wiring, lowering power consumption and improving efficiency.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"100\"\u003e\u003cimg src=\"https:\/\/www.gatee.eu\/images\/gate\/dodatki\/deb.png\"\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cb\u003eCONTACT BOUNCE FILTERING\u003c\/b\u003e\n\u003cp\u003eThe X-ASR circuit filters out contact bounce from the gun’s switch surfaces. This enables flawless operation of micro-switches that are prone to vibration in airsoft guns. Normally, switches may briefly disconnect during the cycle, causing the motor to lose power. Contact bounce filtering improves motor performance and reduces heat build-up.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"100\"\u003e\u003cimg src=\"https:\/\/www.gatee.eu\/images\/gate\/produkty\/titan\/icon-self-test.png\"\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cstrong\u003eBUILT-IN SELF TEST\u003c\/strong\u003e\n\u003cp\u003eThe self-test checks the proper functioning of the gun’s electrical components every time the battery is connected.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable cellpadding=\"10\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"100\"\u003e\u003cimg src=\"https:\/\/www.gatee.eu\/images\/gate\/produkty\/titan\/icon-coating.png\"\u003e\u003c\/td\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cstrong\u003ePROTECTIVE COATING\u003c\/strong\u003e\n\u003cp\u003eThe circuit is protected with a military-grade coating that ensures reliable operation in all conditions (Military Specification MIL-V-173C).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237145465180,"sku":"5904730532686","price":29.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/x-asr-premiere_190709-1948.jpg?v=1743373745"},{"product_id":"jefftron-mosfet-v3","title":"Jefftron Mosfet V3","description":"\u003cp\u003eJefftron Mosfet – V3 integrates an extremely compact mosfet directly with Version 2 mechanical switch contacts, allowing the mosfet to be installed entirely inside the gearbox with ease. The circuit prevents sparking that occurs in traditional mechanical trigger systems, which eventually leads to carbonized switch contacts. It reduces the electrical resistance compared to a mechanical switch, allowing the motor to draw more power from the battery. Lower resistance makes the electrical system more efficient, resulting in higher rate of fire and reduced trigger delay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\n\u003c\/strong\u003e– Mosfet integrated with SHS-manufactured V3 switch contacts\u003cbr\u003e\n– Easy to install in all V3 gearboxes\u003cbr\u003e\n– Use a maximum of 1.5qmm (AWG16) power wires and 25qmm (AWG21) signal wire\u003cbr\u003e\n– Designed for continuous use with up to 25A current. For heavy builds, we recommend the \u003ca href=\"https:\/\/www.atom-airsoft.fi\/tuote\/jefftron-extreme-mosfet-with-wiring\/\"\u003eExtreme mosfet\u003c\/a\u003e or Mosfet II circuit.\u003cbr\u003e\n– Compatible with all batteries up to 17 V (Ni-xx 8.4V – 14.4V, LiPo 7.4V – 14.8V, LiFe 9.9V – 13.2V)\u003cbr\u003e\n\u003cstrong\u003eD CIRCUIT INSTRUCTIONS: You can download the English manual \u003c\/strong\u003e\u003ca title=\"manual mosfet-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_mosfet-v2.pdf\"\u003ehere\u003c\/a\u003e \u003cpdf kb\u003e\u003c\/pdf\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWARNING! Installation should be performed by a professional who can make \u003cem\u003ehigh-quality\u003c\/em\u003e solder joints and is experienced in repairing airsoft guns! \u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003eWiring example:\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-v3.png\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"center\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/product_chart.png\" alt=\"tabulka_produktu\"\u003e\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237155361116,"sku":"660902437535","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-v3.jpg?v=1743373857"},{"product_id":"gate-titan-v2-ngrs-basic-mosfet-mikrokontrolleriyksikko-johdotus-taakse","title":"GATE TITAN V2 NGRS Expert MOSFET\/Microcontroller Unit (Rear Wiring)","description":"\u003cp\u003eThe TITAN™ Drop-in MOSFET\/microcontroller unit takes your replica to the next level. The new eight optical sensor technology ensures long sensor life without mechanical stress. With its versatile features, easy installation and programming, and a 1-year warranty, the TITAN™ Drop-in MOSFET\/microcontroller unit is among the best MOSFET packages on the market.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFunctions:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMOSFET\u003c\/li\u003e\n\u003cli\u003eAdjustable trigger sensitivity\u003c\/li\u003e\n\u003cli\u003eAdjustable active brake\u003c\/li\u003e\n\u003cli\u003e3 different fire mode configurations\u003c\/li\u003e\n\u003cli\u003eOption for “Semi-Only” configuration\u003c\/li\u003e\n\u003cli\u003eGearbox parts monitoring – No lock-ups\u003c\/li\u003e\n\u003cli\u003eSmart trigger\u003c\/li\u003e\n\u003cli\u003eTwo-stage trigger (AUG mode)\u003c\/li\u003e\n\u003cli\u003eComprehensive battery protection features\u003c\/li\u003e\n\u003cli\u003eSmart fuse\u003c\/li\u003e\n\u003cli\u003eSelf-protection\u003c\/li\u003e\n\u003cli\u003eEasy installation\/programming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eGATE TITAN™ V2 NGRS unit with Expert firmware\u003c\/li\u003e\n\u003cli\u003eInstallation accessories\u003c\/li\u003e\n\u003cli\u003eQuickstart guide\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8 optical sensors – NO mechanically wearing micro-switches\u003c\/li\u003e\n\u003cli\u003eReplaces the entire trigger mechanism – NO wearing parts\u003c\/li\u003e\n\u003cli\u003eFirmware upgradable via USB link\u003c\/li\u003e\n\u003cli\u003eBattery voltage range 7.2V – 14.8V (absolute minimum and maximum 3V – 17V)\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003cli\u003eSoftware upgradable via USB link\u003c\/li\u003e\n\u003cli\u003eProgrammable with tactical programming module or via USB link on PC and smartphone\u003c\/li\u003e\n\u003cli\u003eExcellent compatibility, including with “short-stroked” and DSG gears\u003c\/li\u003e\n\u003cli\u003eEasy to install – true “Drop-in” installation for most version 2 gearboxes\u003c\/li\u003e\n\u003cli\u003eSmart fuse and other protection features\u003c\/li\u003e\n\u003cli\u003eAlphaWire 16AWG EcoWire wiring with Deans T-connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cstrong\u003eAdjustable Features\u003c\/strong\u003e\n\u003c\/h1\u003e\n\u003ch4\u003eMicrocontroller control and optical sensors give the user almost unlimited options to customize settings to their preference\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable trigger sensitivity – the unit tracks the trigger with five sensors. The user can choose how short the pull needs to be for the replica to fire!\u003c\/li\u003e\n\u003cli\u003e3 different fire mode configurations – Safe-semi-auto, safe-semi-semi, safe-semi-burst\u003c\/li\u003e\n\u003cli\u003eOption for “semi-only” configuration – easily set the replica to semi-only without mechanical modifications\u003c\/li\u003e\n\u003cli\u003eGearbox parts monitoring – no semi lock-up and the gearbox always completes a full cycle\u003c\/li\u003e\n\u003cli\u003eSmart trigger – the first shot is fired as quickly as possible regardless of the set rate of fire\u003c\/li\u003e\n\u003cli\u003eTwo-stage trigger (so-called “AUG mode”) – short pull fires semi, long pull fires full-auto\u003c\/li\u003e\n\u003cli\u003eAdaptive active braking – TITAN automatically detects when to stop the gearbox and adjusts braking accordingly\u003c\/li\u003e\n\u003cli\u003eComprehensive battery protection – protects lithium batteries from over-discharge. Low voltage protection adjustable for different battery types (2.7V, 2.9V, 3.2V or 3.4V)\u003c\/li\u003e\n\u003cli\u003eSmart fuse – TITAN monitors voltage, current, and circuit temperature, protecting the circuit and gearbox from short circuits, overload, and overheating\u003c\/li\u003e\n\u003cli\u003eSelf-diagnostics – TITAN monitors possible faults and stores errors as easy-to-read codes for quick troubleshooting\u003c\/li\u003e\n\u003cli\u003eEasily programmable – settings and features can be adjusted in the field using a programming card or at home on a PC via USB link\u003c\/li\u003e\n\u003cli\u003eUpgradeable software – thanks to the USB link, TITAN can be updated. GATE continuously works to improve their MOSFETs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMore information:\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.gatee.eu\/products\/titan\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eManufacturer's website\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eTITAN V2 NGRS \u003cstrong\u003efits\u003c\/strong\u003e the following Next Generation Recoil Shock models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTokyo Marui M4 Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui SCAR-H Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui SCAR-L Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui HK416D Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui HK416C Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui HK417 Next Generation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTITAN V2 NGRS \u003cstrong\u003eDOES NOT FIT\u003c\/strong\u003e the following Next Generation Recoil Shock models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTokyo Marui 36C Custom Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui Model 36K Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui AKS74N Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui AKS74U Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui AK102 Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui AK47 Type 3 Next Generation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237160407388,"sku":"GATE-TTN4-EMR","price":139.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/02P1011092_200623-1015_1920.webp?v=1743373957"},{"product_id":"lonex-kullatut-moottorin-liittimet-10kpl","title":"Lonex Gold-plated motor connectors, 10pcs","description":"\u003cp\u003eHigh-quality gold-plated motor connectors for airsoft electric guns.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLonex as Manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLonex Technology Co., Ltd\u003c\/strong\u003e was founded in 1980 in Taipei, Taiwan, specializing in plastic injection molds and injection molding services. Later, Lonex expanded into producing airsoft gun parts as well as complete airsoft guns. The company’s first airsoft products were various upgrade components. Lonex upgrade parts are among the top tier in the airsoft industry. The company has invested heavily in the quality and consistency of its products. As a result, Lonex has achieved the ISO 9001 quality standard and the TL9000 certification, which ensures excellent working conditions.\u003c\/p\u003e","brand":"Lonex","offers":[{"title":"Default Title","offer_id":54237197893980,"sku":"LONEX-GB-05-03","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/16805-000.jpg?v=1743374488"},{"product_id":"jefftron-leviathan-evo3","title":"Jefftron Leviathan, EVO3","description":"\u003cp\u003eLeviathan - EVO3 is an advanced microprocessor-controlled MOSFET unit programmable via Bluetooth. The EVO3 designation means this unit is compatible with \u003ca href=\"https:\/\/www.atom-airsoft.fi\/?s=ASG+CZ+Scorpion+EVO+3\u0026amp;post_type=product\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eASG CZ Scorpion EVO 3\u003c\/a\u003e airsoft guns. Leviathan brings a wide range of new features to the EVO3 AEG and improves existing functions. With this unit, you can control your gun’s fire modes, rate of fire (ROF), pre-cocking, active braking, protect LiPo\/LiFe batteries from over-discharge, and much more. All features are managed via a smartphone app (Android and iOS). The Leviathan unit is installed inside the EVO3 gearbox, replacing the traditional trigger contacts. It comes with pre-installed wiring, including a 30A mini fuse and Deans\/T-connectors. No soldering required during installation!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote!\u003c\/strong\u003e The gearbox and trigger shown in the picture are not included with the unit.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eWhat features does the Leviathan unit provide?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust and add all fire modes in any selector position (SAFE - SEMI - AUTO).\u003c\/li\u003e\n\u003cli\u003eThree different burst fire modes. Each burst length adjustable between 2 - 20 shots.\u003c\/li\u003e\n\u003cli\u003eLimit the gun’s rate of fire by adding motor pauses between shots. This keeps trigger response extremely fast while reducing full-auto speed electronically.\u003c\/li\u003e\n\u003cli\u003eAdjustable active brake strength, which can also be disabled.\u003c\/li\u003e\n\u003cli\u003e\"Pre-cocking\" function for instant semi-auto response without delay.\u003c\/li\u003e\n\u003cli\u003eARL mode: Included anti-reverse latch allows pre-cocking, lower-level active braking, and use of DSG gears.\u003c\/li\u003e\n\u003cli\u003eOption to add a delay between shots to simulate the effect of recoil on shooting speed. Delay adjustable between 0.1 - 4 seconds.\u003c\/li\u003e\n\u003cli\u003eAutomatic fuse detects high current to prevent damage if something goes wrong.\u003c\/li\u003e\n\u003cli\u003eLow voltage warning for LiPo or LiFe batteries. Works with 2S - 4S LiPo and 3S - 4S LiFe batteries.\u003c\/li\u003e\n\u003cli\u003eUser can save multiple configuration profiles.\u003c\/li\u003e\n\u003cli\u003eSoftware displays real battery voltage with a color-coded indicator for charge level.\u003c\/li\u003e\n\u003cli\u003eThree separate shot counters: total lifetime shots, user-resettable counter, and one that resets when the battery is disconnected.\u003c\/li\u003e\n\u003cli\u003eError log records all errors during the unit’s lifetime.\u003c\/li\u003e\n\u003cli\u003eLeviathan - EVO3 monitors current, voltage, and temperature, protecting components from damage in case of failure.\u003c\/li\u003e\n\u003cli\u003eMotor vibrates and beeps to provide feedback to the user.\u003c\/li\u003e\n\u003cli\u003eSettings are saved in real time to Leviathan - EVO3 memory, so you won’t lose them if Bluetooth disconnects or the battery is removed during adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProgrammable fire modes:\u003cbr\u003e\n\u003c\/strong\u003e\u003cem\u003eEach mode below can be assigned to any selector position (SAFE - SEMI - AUTO).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAFE: Trigger pull does nothing, gun is on safe.\u003c\/li\u003e\n\u003cli\u003eSEMI: Fires one shot per trigger pull.\u003c\/li\u003e\n\u003cli\u003eSEMI\/BurstX: Short pull fires one shot, long pull fires a preset burst.\u003c\/li\u003e\n\u003cli\u003e\"Double trigger\": Fires once on pull and once on release (two shots per full trigger cycle).\u003c\/li\u003e\n\u003cli\u003eBurstX: Fires a burst with one trigger pull.\u003c\/li\u003e\n\u003cli\u003eBurstX\/BurstY: Short pull fires burstX, long pull fires burstX followed by burstY.\u003c\/li\u003e\n\u003cli\u003eBurstX\/Full: Short pull fires burstX, long pull fires full-auto.\u003c\/li\u003e\n\u003cli\u003eFull: Fires full-auto as long as the trigger is held.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to install in ASG CZ Scorpion EVO 3 AEG, no modification to the gun or circuit required.\u003c\/li\u003e\n\u003cli\u003eCompatible with Scorpion EVO 3 - A1, Scorpion EVO 3 - A1 B.E.T., Scorpion EVO 3 - A1 carbine gearbox gen.1, 2018 version, and 2020 version. Works with standard or CNC trigger.\u003c\/li\u003e\n\u003cli\u003eARL mode: Included anti-reverse latch allows pre-cocking, lower-level active braking, and DSG gear use.\u003c\/li\u003e\n\u003cli\u003eSector gear and trigger position monitored by micro switch for perfect semi and burst timing.\u003c\/li\u003e\n\u003cli\u003eIncludes CNC-machined trigger with adjustable pull length via set screw.\u003c\/li\u003e\n\u003cli\u003eLeviathan unit comes with complete wiring for easy installation. Wires are long enough for all EVO3 gearbox setups with battery in the stock. No soldering required.\n\u003cul\u003e\n\u003cli\u003eHigh-quality pre-installed 1.5 mm² (1.5 qmm \/ AWG16) power wires with durable MPPE insulation and blue 0.34 qmm signal wire (AWG24)\u003c\/li\u003e\n\u003cli\u003ePower wire outer diameter: 2.06 mm\u003c\/li\u003e\n\u003cli\u003eSignal wire outer diameter: 1.24 mm\u003c\/li\u003e\n\u003cli\u003eWire length from gearbox rear to battery connector: 290 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eElectronic board coated with lacquer for water protection.\u003c\/li\u003e\n\u003cli\u003ePre-cocking function requires anti-reversal latch to prevent gear backspin.\u003c\/li\u003e\n\u003cli\u003eDesigned to operate with batteries up to 17V. Compatible with 8.4 - 12V NiMH and 7.4 - 14.8V lithium-based batteries.\u003c\/li\u003e\n\u003cli\u003eParts removed from gearbox during installation: cut-off lever and stock electrical components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eLinks:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.jefftron.net\/application\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eJeffTron mobile app for Leviathan on iOS and Android\u003c\/a\u003e\u003cbr\u003e\nLeviathan EVO3 manual: Download the installation and user manual \u003ca title=\"manual_leviathan-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_leviathan-EVO3.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHERE\u003c\/a\u003e \u003cpdf mb englanti\u003e\u003c\/pdf\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003cbr\u003e\n- Leviathan - EVO3 \"drop-in module\" with front wiring. Deans\/T-connector on wires. Motor wires with standard motor connectors.\u003cbr\u003e\n- ARL mode: Anti-reverse latch, spring, and special screw\u003cbr\u003e\n- Two washers for screws\u003cbr\u003e\n- Foam pad for Leviathan installation\u003cbr\u003e\n- English installation manual\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Instructions:\u003c\/strong\u003e\u003cbr\u003e\n- Installing the unit inside the gearbox requires knowledge of airsoft gun mechanics.\u003cbr\u003e\n- Read the manual before installation to avoid damage!\u003cbr\u003e\n- Short circuit or incorrect battery connection will immediately damage the unit! Incorrect wiring voids warranty and may cause battery explosion!\u003cbr\u003e\n- Always disconnect the battery when the gun is not in use! Otherwise, the circuit may slowly drain the battery, rendering it unusable. When connected, Leviathan draws a small standby current.\u003cbr\u003e\n- Always ensure the barrel is pointed in a safe direction before connecting the battery!\u003cbr\u003e\n- Do not modify, repair, or expose the Leviathan EVO3 board to liquids or heat.\u003c\/p\u003e\n\u003ch2\u003eVIDEO: Leviathan - EVO3 Features:\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/jefftron-leviathan-evo3-11.png\"\u003e\u003cimg class=\"alignnone size-full wp-image-527053\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/jefftron-leviathan-evo3-11.png\" alt=\"JeffTron Leviathan, EVO3\" width=\"1500\" height=\"761\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/jefftron-leviathan-evo3-12.png\"\u003e\u003cimg class=\"alignnone size-full wp-image-527055\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/jefftron-leviathan-evo3-12.png\" alt=\"JeffTron Leviathan, EVO3\" width=\"1634\" height=\"1086\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237314810204,"sku":"JEF1152239457","price":144.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/jefftron-leviathan-evo3.png?v=1743375926"},{"product_id":"gate-blu-linkki-titan-ja-aster-mosfet-yksikolle","title":"GATE Blu-link for TITAN and ASTER MOSFET unit","description":"\u003cp\u003eThe GATE Blu-link for \u003ca href=\"https:\/\/www.atom-airsoft.fi\/https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2021\/08\/186564321_753392202012429_5501954215246231936_n-1.jpg\/?s=TITAN\u0026amp;post_type=product\u0026amp;filter_valmistaja=gate\u0026amp;query_type_valmistaja=or\"\u003eTITAN\u003c\/a\u003e and \u003ca href=\"https:\/\/www.atom-airsoft.fi\/https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2021\/08\/186564321_753392202012429_5501954215246231936_n-1.jpg\/?s=ASTER\u0026amp;post_type=product\u0026amp;filter_valmistaja=gate\u0026amp;query_type_valmistaja=or\"\u003eASTER\u003c\/a\u003e MOSFET units allows you to connect the TITAN and ASTER circuit to a computer or smartphone and program the unit using the GATE Control Station app via Bluetooth.\u003c\/p\u003e\n\u003cp\u003eThis product is compatible with GATE ASTER and TITAN units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlu-link\u003c\/li\u003e\n\u003cli\u003eMicro USB cable\u003c\/li\u003e\n\u003cli\u003eEnglish quick start guide for GATE Control Station™ setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEasily update your TITAN\/ASTER unit firmware to the latest version or adjust its settings. The USB link works with the GATE Control Station™ app, giving you full access to configure and update your TITAN\/ASTER unit.\u003c\/p\u003e\n\u003cp\u003eFor more information about the GATE Control Station app, click \u003ca href=\"https:\/\/gatee.eu\/software\/gcs\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"aligncenter wp-image-554926 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/ETU-compatibility-1024x683.jpg\" alt=\"\" width=\"1024\" height=\"683\"\u003e\u003c\/p\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237419733340,"sku":"GATE-BLU-L","price":79.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/1-blu-l-top-scaled.jpg?v=1743377163"},{"product_id":"jefftron-leviathan-v3-optinen","title":"Jefftron Leviathan V3, optical","description":"\u003cp\u003eThe Jefftron Leviathan compatible with Version 3 gearbox is one of the most advanced microprocessor-controlled ETU (electronic trigger unit) boards on the airsoft market! The Jefftron Leviathan V3 Optical monitors the gear position in real time using \u003cstrong\u003etwo optical sensors\u003c\/strong\u003e. The Leviathan board can be easily programmed via \u003cstrong\u003eBluetooth\u003c\/strong\u003e connection using a smartphone (iOS or Android).\u003c\/p\u003e\n\u003cp\u003eWith the included foam pad that can be attached to the AK trigger mechanism, the trigger travel can be adjusted to be extremely short, achieving a so-called \"\u003cstrong\u003ehair trigger\u003c\/strong\u003e\".\u003c\/p\u003e\n\u003cp\u003eThe Leviathan V3 Optical unit supports \u003cstrong\u003eRFTS\u003c\/strong\u003e \u003cstrong\u003etechnology\u003c\/strong\u003e (Unique Real Feel Trigger System), where a separate spring mechanism simulates the trigger response of a real AK74. Jefftron collaborated with a gunsmith specialized in firearms to achieve a realistic trigger feel in the RFTS design.\u003c\/p\u003e\n\u003cp\u003eThe Leviathan series offers various expansion options through an output port on the board. (Installing additional accessories requires soldering on the PCB. Please leave modifications to a professional.)\u003c\/p\u003e\n\u003cp\u003eThe Leviathan brings a wide range of completely new features to your AEG and improves existing ones. With this unit, you can control your gun’s fire modes, rate of fire (ROF), pre-cocking, active braking, protect LiPo\/LiFe batteries from over-discharge, and much more.\u003c\/p\u003e\n\u003cp\u003eThe Leviathan unit is fully installed inside the Version 3 gearbox, replacing the traditional trigger switch contacts. The unit comes with pre-installed complete wiring, including a 40A mini fuse and Deans\/T-connectors. No soldering is required for the basic installation!\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eWhat features does the Leviathan unit provide?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust and add all fire modes to any selector position (SAFE - SEMI - AUTO).\u003c\/li\u003e\n\u003cli\u003eThree different burst fire modes. Each mode’s burst length can be set between 2 - 20 shots.\u003c\/li\u003e\n\u003cli\u003eOption to stop firing when the magazine is empty. Magazine change can be signaled to the gun via an additional switch (sold separately).\u003c\/li\u003e\n\u003cli\u003eLimit the gun’s rate of fire by adding pauses between shots while maintaining an extremely fast trigger response, even when full-auto speed is reduced by software.\u003c\/li\u003e\n\u003cli\u003eAdjustable active brake strength, which can also be disabled.\u003c\/li\u003e\n\u003cli\u003e\"Pre-cocking\" function for instant and delay-free semi-auto shots.\u003c\/li\u003e\n\u003cli\u003eOption to add a delay between shots to simulate the effect of firearm recoil on shooting speed. Delay can be set between 0.1 - 4 seconds.\u003c\/li\u003e\n\u003cli\u003eLow voltage warning for LiPo or LiFe batteries. Works with 2S - 4S LiPo and 3S - 4S LiFe batteries.\u003c\/li\u003e\n\u003cli\u003eUser can save multiple configuration profiles.\u003c\/li\u003e\n\u003cli\u003eSoftware displays actual battery voltage with a color-coded indicator for charge level.\u003c\/li\u003e\n\u003cli\u003eThree separate shot counters: total lifetime shots, user-resettable counter, and one that resets when the battery is disconnected.\u003c\/li\u003e\n\u003cli\u003eError log records all errors during the unit’s lifetime.\u003c\/li\u003e\n\u003cli\u003eLeviathan V3 monitors current, voltage, and temperature, protecting components from damage in case of failure.\u003c\/li\u003e\n\u003cli\u003eMotor vibrates and beeps to provide feedback to the user.\u003c\/li\u003e\n\u003cli\u003eProgramming settings are saved in real time to the Leviathan V3 memory unit, so you won’t lose settings if Bluetooth disconnects or the battery is removed during adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProgrammable fire modes:\u003cbr\u003e\n\u003c\/strong\u003e\u003cem\u003eEach fire mode below can be assigned to any selector position (SAFE - SEMI - AUTO).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAFE: Trigger pull does nothing, gun is on safe.\u003c\/li\u003e\n\u003cli\u003eSEMI: Fires one shot per trigger pull.\u003c\/li\u003e\n\u003cli\u003eSEMI\/BurstX: Short pull fires one shot, long pull fires a preset burst.\u003c\/li\u003e\n\u003cli\u003e\"Double trigger\": Fires once on pull and once on release (two shots per trigger cycle).\u003c\/li\u003e\n\u003cli\u003eBurstX: Fires a burst with one trigger pull.\u003c\/li\u003e\n\u003cli\u003eBurstX\/BurstY: Short pull fires burstX, long pull fires burstX followed by burstY.\u003c\/li\u003e\n\u003cli\u003eBurstX\/Full: Short pull fires burstX, long pull fires full-auto.\u003c\/li\u003e\n\u003cli\u003eFull: Fires full-auto as long as the trigger is held.\u003c\/li\u003e\n\u003cli\u003eVirtual reload: Pull the trigger to virtually reload the magazine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Leviathan electronic board is coated with lacquer for water protection.\u003c\/li\u003e\n\u003cli\u003ePre-cocking function requires an anti-reversal latch to prevent gear backspin.\u003c\/li\u003e\n\u003cli\u003eDesigned to operate and withstand up to 17V batteries. Compatible with 8.4 - 12V NiMH and 7.4 - 14.8V lithium-based batteries.\u003c\/li\u003e\n\u003cli\u003eParts removed from the gearbox during installation: cut-off lever, original trigger, switch contacts, and safety parts. Original trigger can still be used with the Leviathan board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLeviathan manual:\u003c\/strong\u003e Download the installation and user manual \u003ca title=\"manual_leviathan-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_leviathan-V3.pdf\"\u003eHERE\u003c\/a\u003e \u003cpdf mb englanti\u003e\u003c\/pdf\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownload the Leviathan app:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.jefftron.net\/application\"\u003ehttps:\/\/www.jefftron.net\/application\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003cbr\u003e\n\u003c\/strong\u003e\u003cbr\u003e\n- Leviathan - V3 Optical with Deans\/T-connector and 40A fuse slot. Motor wires with standard motor connectors.\u003cbr\u003e\n- Screw set for securing Leviathan inside the gearbox.\u003cbr\u003e\n- Foam pad for trigger sensitivity adjustment.\u003cbr\u003e\n- RFTS mechanism for realistic trigger feel.\u003cbr\u003e\n- English installation guide.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/leviathan.png\" alt=\"Leviathan banner\"\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/fIbqSugvzbU\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY INSTRUCTIONS:\u003c\/strong\u003e\u003cbr\u003e\n- Installing the board inside the gearbox requires understanding of airsoft gun mechanics and technical skills.\u003cbr\u003e\n- Read the manual before installing the Leviathan unit to avoid damage!\u003cbr\u003e\n- Short circuit or incorrect battery connection will immediately destroy the unit! Incorrect wiring voids the warranty and may cause the battery to explode!\u003cbr\u003e\n- Always disconnect the battery when the gun is not in use! Otherwise, the board may slowly drain the battery, rendering it unusable. When connected, Leviathan draws a small standby current.\u003cbr\u003e\n- Always ensure the barrel is pointed in a safe direction before connecting the battery!\u003cbr\u003e\n- Do not modify, repair, expose the Leviathan V3 board to liquids or heat.\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237551886684,"sku":"JEF1152239454","price":132.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/leviathan-v3.jpg?v=1743379102"},{"product_id":"jefftron-leviathan-ngrs-optinen-johdotus-taakse","title":"Jefftron Leviathan NGRS, optical (rear wiring)","description":"\u003cp\u003eThe optical Tokyo Marui NGRS-compatible Jefftron Leviathan is one of the most advanced microprocessor-controlled ETU (electronic trigger unit) boards on the airsoft market. The Jefftron Leviathan NGRS optical monitors the gear position in real time using \u003cstrong\u003etwo optical sensors\u003c\/strong\u003e. The Leviathan unit can be easily programmed via \u003cstrong\u003eBluetooth\u003c\/strong\u003e using a smartphone (iOS or Android).\u003c\/p\u003e\n\u003cp\u003eThanks to the Jefftron trigger sensor, the trigger pull can be as short as \u003cstrong\u003e0.13mm\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003eThe Leviathan brings a wide range of new features to your AEG and improves existing functions. With this unit, you can control your gun’s fire modes, rate of fire (ROF), pre-cocking, active braking, protect LiPo\/LiFe batteries from over-discharge, and much more.\u003c\/p\u003e\n\u003cp\u003eThe Leviathan unit is fully installed inside a Version 2 gearbox, replacing the traditional trigger switch assembly. The unit comes pre-wired with complete wiring, including a 40A mini fuse and Deans\/T-connectors. No soldering is required during installation!\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eWhat features does the Leviathan unit provide?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust and add all fire modes to any selector position (SAFE - SEMI - AUTO).\u003c\/li\u003e\n\u003cli\u003eThree different burst fire modes. Each burst length can be set between 2 - 20 rounds.\u003c\/li\u003e\n\u003cli\u003eOption to stop firing when the magazine is empty. Magazine change can be signaled to the gun via an additional switch (sold separately).\u003c\/li\u003e\n\u003cli\u003eLimit the rate of fire by adding pauses between shots while maintaining an extremely fast trigger response, even when reducing full-auto speed via software.\u003c\/li\u003e\n\u003cli\u003eAdjustable active brake strength, which can also be disabled.\u003c\/li\u003e\n\u003cli\u003e\"Pre-cocking\" function for instant semi-auto response without delay.\u003c\/li\u003e\n\u003cli\u003eOption to add a delay between shots to simulate the effect of recoil on real firearms. Delay can be set between 0.1 - 4 seconds.\u003c\/li\u003e\n\u003cli\u003eLow voltage warning for LiPo or LiFe batteries. Works with 2S - 4S LiPo and 3S - 4S LiFe batteries.\u003c\/li\u003e\n\u003cli\u003eUser can save multiple configuration profiles.\u003c\/li\u003e\n\u003cli\u003eSoftware displays actual battery voltage with a color-coded indicator for charge level.\u003c\/li\u003e\n\u003cli\u003eThree separate shot counters: total lifetime shots, user-resettable counter, and one that resets when the battery is disconnected.\u003c\/li\u003e\n\u003cli\u003eError log records all errors during the unit’s lifetime.\u003c\/li\u003e\n\u003cli\u003eLeviathan NGRS monitors current, voltage, and temperature, protecting components from damage in case of failure.\u003c\/li\u003e\n\u003cli\u003eMotor vibrates and beeps to provide feedback to the user.\u003c\/li\u003e\n\u003cli\u003eProgramming settings are saved in real time to the Leviathan V2 memory unit, so you won’t lose settings if Bluetooth disconnects or the battery is removed during adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProgrammable fire modes:\u003cbr\u003e\n\u003c\/strong\u003e\u003cem\u003eEach of the following fire modes can be assigned to any selector position (SAFE - SEMI - AUTO).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAFE: Trigger pull does nothing, the gun is on safe.\u003c\/li\u003e\n\u003cli\u003eSEMI: Fires one shot per trigger pull.\u003c\/li\u003e\n\u003cli\u003eSEMI\/BurstX: Short pull fires one shot, long pull fires a preset burst.\u003c\/li\u003e\n\u003cli\u003e\"Double trigger\": Fires once on pull and once on release (two shots per full trigger cycle).\u003c\/li\u003e\n\u003cli\u003eBurstX: Fires a burst with one trigger pull.\u003c\/li\u003e\n\u003cli\u003eBurstX\/BurstY: Short pull fires burstX, long pull fires burstX followed by burstY.\u003c\/li\u003e\n\u003cli\u003eBurstX\/Full: Short pull fires burstX, long pull fires full-auto.\u003c\/li\u003e\n\u003cli\u003eFull: Fires full-auto as long as the trigger is held.\u003c\/li\u003e\n\u003cli\u003eVirtual reload: Pull the trigger to virtually reload the magazine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Leviathan electronic board is coated with lacquer for water protection.\u003c\/li\u003e\n\u003cli\u003ePre-cocking function requires an anti-reversal latch to prevent reverse gear rotation.\u003c\/li\u003e\n\u003cli\u003eDesigned to operate with batteries up to 17V. Compatible with 8.4 - 12V NiMH and 7.4 - 14.8V lithium-based batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLeviathan manual:\u003c\/strong\u003e Download the installation and user manual \u003ca title=\"manual_leviathan-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_leviathan-NGRS.pdf\"\u003eHERE\u003c\/a\u003e \u003cpdf mb english\u003e\u003c\/pdf\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownload the Leviathan app:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.jefftron.net\/application\"\u003ehttps:\/\/www.jefftron.net\/application\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003cbr\u003e\n- Leviathan NGRS Optical rear-wired with Deans\/T-connector and 40A fuse slot. Motor wires with standard motor connectors.\u003cbr\u003e\n- Screw set for securing Leviathan inside the gearbox.\u003cbr\u003e\n- Foam pad for Leviathan installation.\u003cbr\u003e\n- English installation guide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003cbr\u003e\n\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTokyo Marui M4 Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui HK416D Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui HK416C Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui SCAR-L Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui SCAR-H Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui HK417 Next Generation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY INSTRUCTIONS:\u003c\/strong\u003e\u003cbr\u003e\n- Installing the unit inside the gearbox requires knowledge and experience with airsoft gun mechanics.\u003cbr\u003e\n- Read the manual before installation to avoid damage!\u003cbr\u003e\n- A short circuit or incorrect battery connection will immediately damage the unit! Incorrect wiring voids the warranty and may cause the battery to explode!\u003cbr\u003e\n- Always disconnect the battery when the gun is not in use! Otherwise, the unit may slowly drain the battery, rendering it unusable. When connected, Leviathan draws a small standby current.\u003cbr\u003e\n- Always ensure the barrel is pointed in a safe direction before connecting the battery!\u003cbr\u003e\n- Do not modify, repair, or expose the Leviathan NGRS board to liquids or heat.\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237552935260,"sku":"0660902437900","price":157.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/leviathan-ngrs-gearbox-open.jpg?v=1743379132"},{"product_id":"jefftron-tactical-dual-switch-leviathan-lisatarvikekytkin","title":"Jefftron Dual switch, Leviathan accessory switch (discontinued product)","description":"\u003cp\u003eThe Jefftron Tactical Dual Switch brings new additional features to the Leviathan unit. The accessory switch connects to the “input” port found on the Leviathan. The installation requires soldering onto the circuit board, so please leave the installation to a professional!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLeviathan V2, optical\u003c\/li\u003e\n\u003cli\u003eLeviathan V3, optical\u003c\/li\u003e\n\u003cli\u003eLeviathan NGRS, optical\u003c\/li\u003e\n\u003cli\u003eLeviathan EVO3 v1.1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith the switch, the above units can activate new features such as virtual magazine reload, ON\/OFF control for the tracer hop-up unit light, electronic magazine control, and more.\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237553983836,"sku":"0750122152186","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/tactical-dual-switch-overview.jpg?v=1743379148"},{"product_id":"ares-efcs-yksikko-johdutus-taakse","title":"ARES EFCS unit, rear wiring","description":"\u003cp\u003e Ares EFCS unit. Compatible with EFCS-compatible Ares AEG (Automatic Electric Gun)s.\u003c\/p\u003e","brand":"ARES","offers":[{"title":"Default Title","offer_id":54237566239068,"sku":"9010109170109","price":44.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/17010.png?v=1743379459"},{"product_id":"gate-usb-link-usb-c-kaapeli","title":"GATE USB-Link USB-C cable","description":"\u003cp\u003e USB-C cable for connecting Gate USB-link to a phone or tablet.\u003c\/p\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237620175196,"sku":"5904730532341","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/USB-C-1080.jpg?v=1743380945"},{"product_id":"gate-status-musta","title":"GATE STATUS - black","description":"\u003cp\u003eGATE STATUS is a computer mounted on an airsoft gun. STATUS is one of the most innovative airsoft accessories ever made. It provides the user with real-time information about the gun’s performance and remaining BBs. With this data, you can make more confident tactical decisions on the field. With STATUS, empty magazines or a dead battery mid-game will no longer surprise you! STATUS also enables more accurate shots, as its angle indicator shows when your gun is perfectly level, ensuring the hop-up does not pull your shot off target. All STATUS features are easily accessible by connecting TITAN or ASTER electronic trigger units to the STATUS device via \u003ca href=\"https:\/\/www.atom-airsoft.fi\/tuote\/gate-blu-linkki-titan-ja-aster-mosfet-yksikolle\/\"\u003eBlu-Link\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eSTATUS mounts directly to standard RIS rails. It features an OLED display with adaptive brightness control, protected by an extremely durable polycarbonate lens. The display glass is coated with 3mk FlexibleGlass™ film. The STATUS body is CNC-machined from aircraft-grade aluminum. Its high-quality seals and construction are IP68-certified, and STATUS meets the requirements of the MIL-STD-810H* standard for devices used in harsh conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTATUS Tactical Airsoft Computer\u003c\/li\u003e\n\u003cli\u003eUSB-A and USB-C charging cable\u003c\/li\u003e\n\u003cli\u003ePIN card\u003c\/li\u003e\n\u003cli\u003eQuickStart Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo access all STATUS features, the unit must be connected to an ASTER or TITAN MOSFET unit via Gate \u003ca href=\"https:\/\/www.atom-airsoft.fi\/tuote\/gate-blu-linkki-titan-ja-aster-mosfet-yksikolle\/\"\u003eBlu-Link\u003c\/a\u003e. The tactical computer \u003cstrong\u003ewithout\u003c\/strong\u003e a GATE electronic trigger unit and Bluetooth® adapter offers a limited set of functions.\u003cbr\u003e\nThe Blu-Link adapter is sold separately and is not included in this STATUS package.\u003c\/p\u003e\n\u003cp\u003eThe STATUS display is covered with a protective 3mk FlexibleGlass™ film. If the film is damaged, replace it with a new one. Do not leave the display unprotected to avoid scratches.\u003c\/p\u003e\n\u003cp\u003ePlease note that due to different display settings and lighting conditions, the color of the product in the images may slightly differ from the actual product. Color variations may also occur between different production batches.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"1447\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003e\u003cstrong\u003eSTATUS is compatible with:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"492\"\u003e\u003cstrong\u003eFeatures STATUS adds to the GATE ETU via Blu-Link connection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"421\"\u003e\u003cstrong\u003eFunctions STATUS provides without connection to GATE ETU:\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eTITAN V2\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eRemaining BB counter\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eReplica angle\/position indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eTITAN V3\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eAEG battery voltage monitoring\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eTemperature sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eTITAN V2 NGRS\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eBattery life estimate (how many shots left)\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eMagazine Counter – fired magazine tracker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eASTER V2\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eReplica angle\/position indicator\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eDistance – step counter \u0026amp; calorie burn calculator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eASTER V3\u003c\/td\u003e\n\u003ctd width=\"492\"\u003e\"Bolt-catch Reset\"\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eAdaptive display brightness control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eBlu-Link\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eTemperature sensor\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eMission\/Respawn timer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eBASIC firmware\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eMagazine Counter – fired magazine tracker\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eFour customizable \"desktops\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eADVANCED firmware\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eDistance – step counter \u0026amp; calorie burn calculator\u003c\/td\u003e\n\u003ctd width=\"421\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eEXPERT firmware\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eAdaptive display brightness control\u003c\/td\u003e\n\u003ctd width=\"421\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" width=\"534\"\u003eSTATUS computer is NOT compatible with GCS PC\/macOS 2.x software or traditional MOSFET circuits!\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eFire mode indicator\u003c\/td\u003e\n\u003ctd width=\"421\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"492\"\u003eMission\/Respawn timer\u003c\/td\u003e\n\u003ctd width=\"421\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003e\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eFour customizable \"desktops\"\u003c\/td\u003e\n\u003ctd width=\"421\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=h5uJS_GVmgo\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=W5gTr3LWcr0\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=O4GZAhG_m_8\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237667492188,"sku":"5904121820248","price":289.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/1-STS-na-sklep_6_210408-1132.jpg?v=1743382444"},{"product_id":"gate-status-dark-earth","title":"GATE STATUS - Dark Earth","description":"\u003cp\u003eGATE STATUS is a computer that mounts directly to an airsoft gun. STATUS is one of the most innovative airsoft accessories ever made. It provides the user with real-time information about the gun’s performance and remaining BBs. With this data, you can make more confident tactical decisions on the field. With STATUS, empty magazines or a dead battery mid-game will no longer surprise you! STATUS also enables more accurate shots thanks to its angle indicator, which shows when your replica is perfectly level, ensuring the hop-up does not pull your shot off target. All STATUS features are easily accessible by connecting TITAN or ASTER electronic trigger units to the STATUS device via \u003ca href=\"https:\/\/www.atom-airsoft.fi\/tuote\/gate-blu-linkki-titan-ja-aster-mosfet-yksikolle\/\"\u003eBlu-Link\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eSTATUS mounts directly to standard RIS rails. It features an OLED display with adaptive brightness control, protected by an extremely durable polycarbonate lens. The display glass is coated with 3mk FlexibleGlass™ film. The STATUS body is CNC-machined from aircraft-grade aluminum. High-quality seals and construction are IP68-certified, and STATUS meets the requirements of the MIL-STD-810H* standard for devices used in harsh conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTATUS Tactical Airsoft Computer\u003c\/li\u003e\n\u003cli\u003eUSB-A and USB-C charging cable\u003c\/li\u003e\n\u003cli\u003ePIN card\u003c\/li\u003e\n\u003cli\u003eQuickStart Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo access all STATUS features, the unit must be connected to an ASTER or TITAN MOSFET unit via Gate \u003ca href=\"https:\/\/www.atom-airsoft.fi\/tuote\/gate-blu-linkki-titan-ja-aster-mosfet-yksikolle\/\"\u003eBlu-Link\u003c\/a\u003e. The tactical computer \u003cstrong\u003ewithout\u003c\/strong\u003e a GATE electronic trigger unit and Bluetooth® adapter offers a limited set of functions.\u003cbr\u003e\nThe Blu-Link adapter is sold separately and is not included in this STATUS package.\u003c\/p\u003e\n\u003cp\u003eThe STATUS display is covered with protective 3mk FlexibleGlass™ film. If the film is damaged, replace it with a new one. Do not leave the display unprotected to avoid scratches.\u003c\/p\u003e\n\u003cp\u003ePlease note that due to different display settings and lighting conditions, the color of the product in the images may slightly differ from the actual product. Color variations may also occur between different production batches.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"1447\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003e\u003cstrong\u003eSTATUS is compatible with:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"492\"\u003e\u003cstrong\u003eFeatures STATUS adds to GATE ETU via Blu-Link connection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"421\"\u003e\u003cstrong\u003eFunctions STATUS provides without connection to GATE ETU:\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eTITAN V2\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eRemaining BB counter\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eReplica angle\/position indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eTITAN V3\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eAEG battery voltage monitoring\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eTemperature sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eTITAN V2 NGRS\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eBattery life estimate (how many shots remain)\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eMagazine Counter – fired magazine tracker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eASTER V2\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eReplica angle\/position indicator\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eDistance – step counter \u0026amp; calorie burn calculator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eASTER V3\u003c\/td\u003e\n\u003ctd width=\"492\"\u003e\"Bolt-catch Reset\"\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eAdaptive screen brightness control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eBlu-Link\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eTemperature sensor\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eMission\/Respawn timer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eBASIC firmware\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eMagazine Counter – fired magazine tracker\u003c\/td\u003e\n\u003ctd width=\"421\"\u003eFour customizable \"desktops\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eADVANCED firmware\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eDistance – step counter \u0026amp; calorie burn calculator\u003c\/td\u003e\n\u003ctd width=\"421\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003eEXPERT firmware\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eAdaptive screen brightness control\u003c\/td\u003e\n\u003ctd width=\"421\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" width=\"534\"\u003eSTATUS computer is NOT compatible with GCS PC\/macOS 2.x software or traditional MOSFET circuits!\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eFire mode indicator\u003c\/td\u003e\n\u003ctd width=\"421\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"492\"\u003eMission\/Respawn timer\u003c\/td\u003e\n\u003ctd width=\"421\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"534\"\u003e\u003c\/td\u003e\n\u003ctd width=\"492\"\u003eFour customizable \"desktops\"\u003c\/td\u003e\n\u003ctd width=\"421\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=W5gTr3LWcr0\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=O4GZAhG_m_8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=h5uJS_GVmgo\u003c\/p\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237668802908,"sku":"5904121820255","price":349.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/2-STS-na-sklep_5_210408-1132.jpg?v=1743382462"},{"product_id":"jefftron-mosfet-v2-johdotus-taakse","title":"Jefftron Mosfet - V2, rear wiring","description":"\u003cp\u003eJefftron Mosfet - V2, rear wiring connects an extremely small mosfet directly to the Version 2 mechanical switch contacts, allowing the mosfet to be installed entirely inside the gearbox with ease. The circuit prevents sparking that occurs in traditional mechanical trigger systems, which eventually leads to carbonized switch contacts. The circuit reduces the electrical resistance compared to a mechanical switch. This allows the motor to draw power from the battery more efficiently. Lower resistance makes the electrical system more effective, resulting in a higher rate of fire and reduced trigger delay.\u003c\/p\u003e\n\u003cp\u003eThe package includes suitable motor and fuse connectors as well as heat shrink tubing. In addition, the package contains a highly conductive T-connector (Deans) for battery connection. The connectors are separate and require soldering the wires to the connectors during installation. In the wired version, the wires connected to the circuit itself are pre-soldered to make assembly easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\n\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMosfet integrated with SHS-manufactured V2 switch contacts\u003c\/li\u003e\n\u003cli\u003eEasy to install in all V2 gearboxes\u003c\/li\u003e\n\u003cli\u003eUse a maximum of 1.5qmm (AWG16) power wires and 25qmm (AWG21) signal wire\u003c\/li\u003e\n\u003cli\u003eDesigned for continuous use with a maximum current of 25A. For heavy builds, we recommend the \u003ca href=\"https:\/\/www.atom-airsoft.fi\/tuote\/jefftron-mosfet-ii-johdotettuna\/\"\u003eMosfet II circuit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eDesigned to work with all batteries up to 17 V (Ni-xx 8.4V – 14.4V, Li-Po 7.4V – 14.8V, Li-Fe 9.9V – 13.2V)\u003cbr\u003e\n\u003cstrong\u003eD CIRCUIT INSTRUCTIONS: You can download the English manual \u003c\/strong\u003e\u003ca title=\"manual mosfet-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_mosfet-v2.pdf\"\u003ehere\u003c\/a\u003e \u003cpdf kb\u003e\u003c\/pdf\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWiring example:\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-v2.png\" alt=\"\"\u003e\u003cimg class=\"center\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/product_chart.png\" alt=\"tabulka_produktu\"\u003e\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237776806236,"sku":"0660902437559","price":38.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-v2-stock_1.jpg?v=1743384273"},{"product_id":"gate-titan-ii-bluetooth-v2-aeg-mikrokontrolleriyksikko-johdotus-taakse","title":"GATE TITAN II Bluetooth Expert V2 microcontroller unit, AEG wiring to the rear","description":"\u003cp\u003eThe next-generation TITAN II Bluetooth® V2 is the flagship of the GATE product line. The unit features built-in Bluetooth 5.2 technology, giving you direct access to TITAN settings – the heart of your electric airsoft gun. Bluetooth technology enables TITAN II to connect with smartwatches, the STATUS system, and other GATE-supported devices and accessories. The innovative gear sensor in the TITAN II system not only counts every tooth but is also the first in the world to detect the direction of gear rotation. This allows for the most precise cycle control on the market, making TITAN II’s cycle monitoring superior to competing solutions. The optical trigger position sensor enables hair-trigger adjustment with incredible precision, allowing the trigger to be set to up to 50 sensitivity levels within the first millimeter of travel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTITAN II Bluetooth® is equipped with a multifunction port,\u003c\/strong\u003e allowing the connection of accessories to the TITAN II unit. Supported accessories include a bolt catch, magazine sensor, hop-up chamber tracer unit, and other yet-to-be-released add-ons. The multifunction port also allows TITAN II to be used with HPA units. This means you can control pneumatic airsoft guns using the TITAN II system, bringing all TITAN features to HPA players as well. (Note! TITAN II is available in different wiring versions for AEG and HPA users. Please select the correct version to ensure easy installation!)\u003c\/p\u003e\n\u003ch2\u003eWhat makes TITAN II Bluetooth® so special?\u003c\/h2\u003e\n\u003cp\u003eTITAN II sensors are in a class of their own, delivering outstanding performance, such as incredibly precise trigger detection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe gear movement sensor has been completely redesigned and now features a patented gear sensor that is the first in the world to detect every tooth and the direction of gear rotation. This enables extremely accurate cycle control.\u003c\/li\u003e\n\u003cli\u003eMechanical protection for trigger sensors increases reliability and safety. Thanks to the new protection, any potential faults or damage to trigger sensors are now covered by warranty.\u003c\/li\u003e\n\u003cli\u003eThe redesigned current sensor allows for highly accurate telemetry measurements.\u003c\/li\u003e\n\u003cli\u003ePre-cocking can be set as a percentage.\u003c\/li\u003e\n\u003cli\u003eBuilt-in voltage booster ensures smooth operation even at low temperatures.\u003c\/li\u003e\n\u003cli\u003eVersatile programmable port for direct connection of:\n\u003cul\u003e\n\u003cli\u003eHop-up chamber with tracer unit\u003c\/li\u003e\n\u003cli\u003eBolt catch\u003c\/li\u003e\n\u003cli\u003eHPA unit (single solenoid; for dual-solenoid HPA systems, an additional cable or TITAN II HPA version is required)\u003c\/li\u003e\n\u003cli\u003eElectric magazine\u003c\/li\u003e\n\u003cli\u003eMagazine sensor\u003c\/li\u003e\n\u003cli\u003eFlashlight\u003c\/li\u003e\n\u003cli\u003eOthers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTITAN II is compatible with the user-friendly GCS app, available for iOS, Android, macOS, Windows, watchOS, and Wear OS.\u003c\/li\u003e\n\u003cli\u003eTITAN II can be paired with a smartwatch out of the box.\u003c\/li\u003e\n\u003cli\u003eFull compatibility with the GATE ecosystem, including GATE STATUS and the upcoming hop-up chamber with tracer.\u003c\/li\u003e\n\u003cli\u003eThe lowest power consumption on the market. Deep sleep mode with only 0.1 mA current draw prevents battery drain (3 times lower than current ETU devices, which already had the lowest consumption on the market).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMultifunction port:\u003c\/li\u003e\n\u003cli\u003eI\/O port: 2x I\/O ports\u003c\/li\u003e\n\u003cli\u003eUART \/ I2C communication\u003c\/li\u003e\n\u003cli\u003eProgrammable power supply with eFuse:\n\u003cul\u003e\n\u003cli\u003eCurrent: max 5.4A peak and 1.5A continuous\u003c\/li\u003e\n\u003cli\u003eVoltage: same as battery voltage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Accessories\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"ak-ul\" data-indent-level=\"1\"\u003e\n\u003cli\u003e\n\u003cp data-renderer-start-pos=\"253\"\u003e\u003cspan id=\"a98bf84a-80a3-44aa-9f6a-b5ed0f5a9b2d\" data-renderer-mark=\"true\" data-mark-type=\"annotation\" data-mark-annotation-type=\"inlineComment\" data-id=\"a98bf84a-80a3-44aa-9f6a-b5ed0f5a9b2d\"\u003ePower supply cable\u003c\/span\u003e (GEL BLASTER \/ Electric Magazine \/ Tracer)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-renderer-start-pos=\"253\"\u003eCable for single solenoid HPA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-renderer-start-pos=\"351\"\u003eCables for dual solenoid HPA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-renderer-start-pos=\"383\"\u003e\u003cspan id=\"2c7aacd1-060b-4224-a99a-3e58caff1fac\" data-renderer-mark=\"true\" data-mark-type=\"annotation\" data-mark-annotation-type=\"inlineComment\" data-id=\"2c7aacd1-060b-4224-a99a-3e58caff1fac\"\u003eDivider\u003c\/span\u003e ready for connecting many accessories (you can connect 1x power supply cable and 2x I\/O cable)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-renderer-start-pos=\"489\"\u003eUniversal I\/O cable for max. 2 DIY accessories (Bolt-catch, Magazine sensor, Flashlight)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-renderer-start-pos=\"581\"\u003e\u003cspan id=\"cfe7518a-7dab-4ca1-9460-2db2b916c64f\" class=\"inline-highlight\" data-renderer-mark=\"true\" data-mark-type=\"annotation\" data-mark-annotation-type=\"inlineComment\" data-id=\"cfe7518a-7dab-4ca1-9460-2db2b916c64f\"\u003eBolt-catch with button and cable (ready to connect)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-renderer-start-pos=\"636\"\u003e\u003cspan id=\"cfe7518a-7dab-4ca1-9460-2db2b916c64f\" class=\"inline-highlight\" data-renderer-mark=\"true\" data-mark-type=\"annotation\" data-mark-annotation-type=\"inlineComment\" data-id=\"cfe7518a-7dab-4ca1-9460-2db2b916c64f\"\u003eMagazine sensor with cable (ready to connect)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237781328220,"sku":"GATE-TBT2-AER","price":149.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/titan-ii-bluetooth_220930-1453_4.webp?v=1743384480"},{"product_id":"gate-titan-ii-bluetooth-v2-mikrokontrolleriyksikko-aeg-johdotus-eteen","title":"GATE TITAN II Bluetooth Expert V2 microcontroller unit, AEG wiring to the front","description":"\u003cp\u003eThe next generation TITAN II Bluetooth V2 is the flagship of the GATE product family. The unit features built in Bluetooth 5.2 technology, giving you direct access to TITAN settings, the heart of your electric airsoft gun. Bluetooth also enables TITAN II to connect to a smartwatch, the STATUS system and other GATE supported devices and accessories. The innovative gear movement sensor not only counts every tooth, but for the first time in the world also detects the rotation direction of the gearset. This enables the most accurate cycle control on the market and makes TITAN II cycle monitoring superior compared to competing solutions. The optical trigger position sensor allows an extremely precise hair trigger setup, with up to 50 sensitivity levels within the first millimeter of trigger travel.\u003c\/p\u003e\n\u003cp\u003eTITAN II Bluetooth is equipped with a multifunction port that allows the connection of additional accessories to the TITAN II unit. Supported accessories include bolt catch, magazine sensor, hop up chamber tracer unit and other accessories that are yet to be released. The multifunction port also enables TITAN II to operate HPA units. This means TITAN II can control air powered airsoft guns and bring the full TITAN feature set to HPA users as well.\u003cbr\u003e(Note! TITAN II comes in wiring versions for both AEG and HPA setups. Please choose the correct version to ensure easy installation.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes TITAN II Bluetooth so special?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTITAN II sensors are in a class of their own, offering exceptionally precise trigger sensing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe redesigned, patented gear sensor detects every tooth and the direction of rotation, enabling extremely accurate cycle control.\u003c\/li\u003e\n\u003cli\u003eMechanical protection for trigger sensors increases reliability and safety. Damage to trigger sensors is now covered under warranty.\u003c\/li\u003e\n\u003cli\u003eThe redesigned current sensor provides highly accurate telemetry measurements.\u003c\/li\u003e\n\u003cli\u003ePre-cocking can be set as a percentage.\u003c\/li\u003e\n\u003cli\u003eBuilt in voltage booster ensures interference free operation even in low temperatures.\u003c\/li\u003e\n\u003cli\u003eThe multifunction programmable port supports direct connection of:\n\u003cul\u003e\n\u003cli\u003eHop-up chamber with tracer illumination\u003c\/li\u003e\n\u003cli\u003eBolt catch\u003c\/li\u003e\n\u003cli\u003eHPA unit (single solenoid. Dual solenoid systems require an additional cable or the TITAN II HPA version)\u003c\/li\u003e\n\u003cli\u003eElectric magazine\u003c\/li\u003e\n\u003cli\u003eMagazine sensor\u003c\/li\u003e\n\u003cli\u003eFlashlight\u003c\/li\u003e\n\u003cli\u003eOthers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTITAN II is compatible with the user friendly GCS app. The app is available for iOS, Android, macOS, Windows, watchOS and Wear OS.\u003c\/li\u003e\n\u003cli\u003eTITAN II can be paired with a smartwatch out of the box.\u003c\/li\u003e\n\u003cli\u003eFull compatibility with the GATE ecosystem, including GATE STATUS and the upcoming hop up chamber with tracer.\u003c\/li\u003e\n\u003cli\u003eLowest power consumption on the market. Deep sleep mode draws only 0.1 mA, preventing battery drain (three times lower than previous ETU units, which already had the lowest draw).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMultifunction port:\u003c\/li\u003e\n\u003cli\u003eI\/O ports: 2x I\/O\u003c\/li\u003e\n\u003cli\u003eUART \/ I2C communication\u003c\/li\u003e\n\u003cli\u003eProgrammable power supply with eFuse\u003c\/li\u003e\n\u003cli\u003eCurrent: max 5.4 A peak, 1.5 A continuous\u003c\/li\u003e\n\u003cli\u003eVoltage: same as battery voltage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible accessories:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply cable (GEL BLASTER \/ Electric Magazine \/ Tracer)\u003c\/li\u003e\n\u003cli\u003eCable for single solenoid HPA\u003c\/li\u003e\n\u003cli\u003eCables for dual solenoid HPA\u003c\/li\u003e\n\u003cli\u003eDivider for connecting multiple accessories (1x power supply and 2x I\/O cables)\u003c\/li\u003e\n\u003cli\u003eUniversal I\/O cable for up to 2 DIY accessories (Bolt catch, Magazine sensor, Flashlight)\u003c\/li\u003e\n\u003cli\u003eBolt catch with button and cable (ready to connect)\u003c\/li\u003e\n\u003cli\u003eMagazine sensor with cable (ready to connect)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237845193052,"sku":"GATE-TBT2-AEF","price":149.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/titan-ii-bluetooth_220930-1453_4_fa13d6f4-6072-4fc0-ac15-63d33b043d62.webp?v=1743386143"},{"product_id":"gate-titan-ii-bluetooth-v2-mikrokontrolleriyksikko-hpa-johdotus-taakse","title":"GATE TITAN II Bluetooth Expert V2 microcontroller unit, HPA wiring to the rear","description":"\u003cp\u003e\u003cstrong\u003eNote! This model is designed for aHPA powered guns! The package includes the necessary cables for both single and dual solenoid HPA units. Converting it for AEG compatibility requires soldering wires directly onto the PCB.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe next generation TITAN II Bluetooth V2 is the flagship of the GATE product family. The unit features built in Bluetooth 5.2 technology, giving you direct access to TITAN settings, the heart of your electric airsoft gun. Bluetooth also enables TITAN II to connect to a smartwatch, the STATUS system and other GATE supported devices and accessories. The innovative gear movement sensor not only counts every tooth, but for the first time in the world also detects the rotation direction of the gearset. This enables the most accurate cycle control on the market and makes TITAN II cycle monitoring superior compared to competing solutions. The optical trigger position sensor allows an extremely precise hair trigger setup, with up to 50 sensitivity levels within the first millimeter of trigger travel.\u003c\/p\u003e\n\u003cp\u003eTITAN II Bluetooth is equipped with a multifunction port that allows the connection of additional accessories to the TITAN II unit. Supported accessories include bolt catch, magazine sensor, hop up chamber tracer unit and other accessories that are yet to be released. The multifunction port also enables TITAN II to operate HPA units. This means TITAN II can control air powered airsoft guns and bring the full TITAN feature set to HPA users as well.\u003cbr\u003e(Note! TITAN II comes in wiring versions for both AEG and HPA setups. Please choose the correct version to ensure easy installation.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes TITAN II Bluetooth so special?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTITAN II sensors are in a class of their own, offering exceptionally precise trigger sensing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe redesigned, patented gear sensor detects every tooth and the direction of rotation, enabling extremely accurate cycle control.\u003c\/li\u003e\n\u003cli\u003eMechanical protection for trigger sensors increases reliability and safety. Damage to trigger sensors is now covered under warranty.\u003c\/li\u003e\n\u003cli\u003eThe redesigned current sensor provides highly accurate telemetry measurements.\u003c\/li\u003e\n\u003cli\u003ePre-cocking can be set as a percentage.\u003c\/li\u003e\n\u003cli\u003eBuilt in voltage booster ensures interference free operation even in low temperatures.\u003c\/li\u003e\n\u003cli\u003eThe multifunction programmable port supports direct connection of:\n\u003cul\u003e\n\u003cli\u003eHop-up chamber with tracer illumination\u003c\/li\u003e\n\u003cli\u003eBolt catch\u003c\/li\u003e\n\u003cli\u003eHPA unit (single solenoid. Dual solenoid systems require an additional cable or the TITAN II HPA version)\u003c\/li\u003e\n\u003cli\u003eElectric magazine\u003c\/li\u003e\n\u003cli\u003eMagazine sensor\u003c\/li\u003e\n\u003cli\u003eFlashlight\u003c\/li\u003e\n\u003cli\u003eOthers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTITAN II is compatible with the user friendly GCS app. The app is available for iOS, Android, macOS, Windows, watchOS and Wear OS.\u003c\/li\u003e\n\u003cli\u003eTITAN II can be paired with a smartwatch out of the box.\u003c\/li\u003e\n\u003cli\u003eFull compatibility with the GATE ecosystem, including GATE STATUS and the upcoming hop up chamber with tracer.\u003c\/li\u003e\n\u003cli\u003eLowest power consumption on the market. Deep sleep mode draws only 0.1 mA, preventing battery drain (three times lower than previous ETU units, which already had the lowest draw).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMultifunction port:\u003c\/li\u003e\n\u003cli\u003eI\/O ports: 2x I\/O\u003c\/li\u003e\n\u003cli\u003eUART \/ I2C communication\u003c\/li\u003e\n\u003cli\u003eProgrammable power supply with eFuse\u003c\/li\u003e\n\u003cli\u003eCurrent: max 5.4 A peak, 1.5 A continuous\u003c\/li\u003e\n\u003cli\u003eVoltage: same as battery voltage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible accessories:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply cable (GEL BLASTER \/ Electric Magazine \/ Tracer)\u003c\/li\u003e\n\u003cli\u003eCable for single solenoid HPA\u003c\/li\u003e\n\u003cli\u003eCables for dual solenoid HPA\u003c\/li\u003e\n\u003cli\u003eDivider for connecting multiple accessories (1x power supply and 2x I\/O cables)\u003c\/li\u003e\n\u003cli\u003eUniversal I\/O cable for up to 2 DIY accessories (Bolt catch, Magazine sensor, Flashlight)\u003c\/li\u003e\n\u003cli\u003eBolt catch with button and cable (ready to connect)\u003c\/li\u003e\n\u003cli\u003eMagazine sensor with cable (ready to connect)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237845553500,"sku":"GATE-TBT2-HER","price":145.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/titan-ii-bluetooth_220930-1453_4_0a76ffd1-139b-42ca-9bde-40130d5f7b00.webp?v=1743386155"},{"product_id":"arcturus-v3-trigger-microswitch-lever","title":"ARCTURUS V3 trigger microswitch lever","description":"\u003cp\u003eThe V3 Trigger Microswitch Lever transmits the trigger movement to the microswitch.\u003c\/p\u003e","brand":"ARCTURUS","offers":[{"title":"Default Title","offer_id":54237887562076,"sku":"AT-SP-K06","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/AT-SP-K061.jpg?v=1743386928"},{"product_id":"arcturus-ak12-laatikonkannen-kiinnityssokka","title":"ARCTURUS AK12 box lid retaining pin","description":"\u003cp\u003e ARCTURUS AK12 box lid retaining pin, spare parts kit.\u003c\/p\u003e","brand":"ARCTURUS","offers":[{"title":"Default Title","offer_id":54237887922524,"sku":"AT-SP-K11","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/960A2677.webp?v=1763536447"},{"product_id":"gate-lipassensori-ja-bolt-catch-nappi-yhdella-liitosjohdolla-titan-ii-bluetoothyksikkoon","title":"GATE Magazine sensor and bolt-catch button, with one connecting cable to TITAN II Bluetooth unit","description":"\u003cp\u003eThe GATE magazine sensor and bolt-catch button connect to the TITAN II Bluetooth® unit via a single I\/O connector cable. When using a splitter with the single-cable model, one I\/O port remains available on the replica. You can also connect the set directly to the TITAN II Bluetooth® V2 module without a splitter. The component is compatible with HPA and AEG ETU FCU units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-catch button features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRealistic bolt-catch function that works together with the magazine sensor. After reloading, you must press the bolt-catch button to fire, just like on a real firearm.\u003c\/li\u003e\n\u003cli\u003eMagazine BB counter reset function stops the replica from firing after the programmed magazine capacity has been shot. After that, a magazine change and bolt-catch “release” (pressing the bolt-catch button) must be performed, as with a real firearm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMagazine sensor features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrevents the replica from firing when the magazine is removed. This function can be enabled or disabled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer product name: Magazine and Bolt-Catch sensor with a single connector for TITAN II Bluetooth®\u003c\/p\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237921509724,"sku":"GATE-IO11","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_9761_230221-1610_MagazineandBolt-catchsensor.webp?v=1743389052"},{"product_id":"gate-lipassensori-liitosjohdolla-titan-ii-bluetoothyksikkoon","title":"GATE Magazine sensor with connecting cable for TITAN II Bluetooth unit","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrevents the gun from firing when the magazine is removed. This function can be enabled or disabled.\u003c\/li\u003e\n\u003cli\u003eThe magazine BB counter reset function stops the gun from firing after the programmed magazine capacity has been shot.\u003c\/li\u003e\n\u003cli\u003eIf you want to combine the magazine sensor and bolt-catch button at the same time, choose \u003ca href=\"https:\/\/www.atom-airsoft.fi\/tuote\/gate-lipassensori-ja-bolt-catch-nappi-yhdella-liitosjohdolla-titan-ii-bluetoothyksikkoon\/\"\u003eGATE magazine sensor and bolt-catch button with a single connection cable for TITAN II Bluetooth® unit\u003c\/a\u003e. Thanks to the splitter, you will have a free power port. With this part, after a magazine change, the bolt-catch “release” (pressing the bolt-catch button) will work just like on a real firearm.\n\u003cp\u003eIf you want to install this part together with a bolt-catch sensor, you will need an I\/O port splitter for the sensors!\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer product name: Magazine sensor with cable for TITAN II Bluetooth®\u003c\/p\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237921673564,"sku":"GATE-IO2.2","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_9764_230223-0933_Magazinesensor.webp?v=1743389062"},{"product_id":"gate-i-o-portin-jakaja-lisavarusteiden-liittamiseen-1x-virtalahde-ja-2x-monitoimilaitteet-titan-ii-bluetooth-yksikkoon","title":"GATE I\/O port splitter for connecting accessories (1x power supply and 2x multifunction devices) to the TITAN II Bluetooth unit","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe I\/O port divider allows you to connect exactly one accessory that requires a power supply and up to two multifunction accessories, such as bolt-catch and magazine detection components, which do not require a power supply at the same time.\u003c\/li\u003e\n\u003cli\u003eThe divider places multifunction ports outside the gearbox, so you do not need to disassemble the gearbox to connect new accessories.\u003c\/li\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer product name: Divider ready for connecting many accessories (1x power supply and 2x multifunctional) for TITAN II Bluetooth®\u003c\/p\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cp class=\"price__regular\"\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237921739100,"sku":"GATE-IO4","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_9762_230222-1233_Divider.webp?v=1743389072"},{"product_id":"gate-bolt-catch-nappi-liitosjohdolla-titan-ii-bluetoothyksikkoon","title":"GATE Bolt-catch button with connecting cable for TITAN II Bluetooth unit","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRealistic bolt catch function that works together with the magazine sensor. After reloading, you must press the bolt catch button to enable firing, just like on a real firearm.\u003c\/li\u003e\n\u003cli\u003eMagazine BB counter reset. This function works with the programmable magazine capacity limit, causing the replica to stop firing after the preset number of shots. The replica will only resume firing after pressing the button.\u003c\/li\u003e\n\u003cli\u003eIf you want to combine the magazine sensor and bolt-catch button at the same time, choose \u003ca href=\"https:\/\/www.atom-airsoft.fi\/tuote\/gate-lipassensori-ja-bolt-catch-nappi-yhdella-liitosjohdolla-titan-ii-bluetoothyksikkoon\/\"\u003eGATE magazine sensor and bolt-catch button with a single connection cable for TITAN II Bluetooth® unit\u003c\/a\u003e. Thanks to the splitter used with this part, you will have a free power port. With this part installed, a magazine change and bolt-catch “release” (pressing the bolt-catch button) will function like on a real firearm. If you want to install this part together with the magazine sensor, you will need an I\/O port splitter as well!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer product name: Bolt-catch button with cable for TITAN II Bluetooth®\u003c\/p\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237921804636,"sku":"GATE-IO3","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_9765_230222-1704_Bolt-catchbutton.webp?v=1743389083"},{"product_id":"gate-dual-solenoid-hpa-johtosarja-titan-ii-bluetooth-yksikolle-aeg-adapterit","title":"GATE Dual solenoid HPA, wiring harness for TITAN II Bluetooth unit + AEG adapters","description":"\u003cp\u003eEnables the connection of dual-solenoid HPA units, such as Polarstar F2, to the TITAN II Bluetooth® V2 unit. With this wiring harness, you can connect an HPA system to a TITAN II unit designed for AEG or HPA models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCable 1:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 50 mm\u003c\/li\u003e\n\u003cli\u003eGauge: AWG 24\u003c\/li\u003e\n\u003cli\u003eConnector: JST PHR-2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCable 2:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 100 mm\u003c\/li\u003e\n\u003cli\u003eGauge: AWG 28\u003c\/li\u003e\n\u003cli\u003eConnector: JST PHR-2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer product name: Cables for dual solenoid HPA for TITAN II Bluetooth® with AEG wiring\u003c\/p\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237921837404,"sku":"GATE-IO5","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_7737_7739_230419-1026.webp?v=1743389093"},{"product_id":"gate-single-solenoid-hpa-adapteri-aeg-johdotettuun-titan-ii-bluetooth-yksikkoon","title":"GATE Single solenoid HPA adapter for AEG wired TITAN II Bluetooth unit","description":"\u003cp\u003eEnables the connection of an HPA unit with a single solenoid, such as GATE Pulsar, Polarstar Jack, or Wolverine Inferno, to a TITAN II Bluetooth® V2 unit equipped with AEG wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 50 mm\u003c\/li\u003e\n\u003cli\u003eThickness: AWG 24\u003c\/li\u003e\n\u003cli\u003eConnector: JST PHR-2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer’s product name: Cable for single solenoid HPA for TITAN II Bluetooth® with AEG wiring\u003c\/p\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237921870172,"sku":"GATE-IO6","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/kable-io-sklep_221109-1115_cable-for-single-solenoid-HPA.webp?v=1743389104"},{"product_id":"gate-universaali-monitoimikaapeli-max-2lle-tee-se-itse-lisavarusteelle-bolt-catch-lipassensori-titan-ii-bluetooth-yksikkoon","title":"GATE Universal multi-function cable for max. 2 DIY accessories (Bolt-Catch, magazine sensor) to TITAN II Bluetooth unit","description":"\u003cp\u003eUniversal cable that allows connecting two input or output accessories. When used as an input, it enables the connection of two buttons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 300 mm\u003c\/li\u003e\n\u003cli\u003eThickness: AWG 28\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManufacturer product name: Universal Multifunctional Cable for max. 2 DIY accessories (Bolt-Catch, Magazine Sensor) for TITAN II Bluetooth®\u003c\/p\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"price-template--14663198933066__main\" class=\"no-js-hidden\" role=\"status\"\u003e\n\u003cdiv class=\"price price--large price--show-badge\"\u003e\n\u003cdiv class=\"price__container\"\u003e\n\u003cdiv class=\"price__regular\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237921902940,"sku":"GATE-IO7","price":5.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/kable-io-sklep_221109-1115_universal-IO-cable-for-2-DIY-accessories.webp?v=1743389114"},{"product_id":"jefftron-leviathan-v3-optinen-two-stage-trigger","title":"Jefftron Leviathan V3, optical, two-stage trigger","description":"\u003cp\u003eThe Jefftron Leviathan optical unit for version 3 gearboxes is one of the most advanced microprocessor-controlled ETU (electronic trigger unit) systems on the airsoft market! The Jefftron Leviathan V3 Optical monitors the gear position in real time using \u003cstrong\u003etwo optical sensors\u003c\/strong\u003e. The Leviathan unit can be easily programmed via \u003cstrong\u003eBluetooth\u003c\/strong\u003e using a smartphone (iOS or Android).\u003c\/p\u003e\n\u003cp\u003eWith the included foam pad that can be attached to the AK trigger mechanism, the trigger travel can be adjusted to be extremely short, achieving a so-called \"\u003cstrong\u003ehair trigger\u003c\/strong\u003e\".\u003c\/p\u003e\n\u003cp\u003eThe Leviathan V3 Optical unit supports \u003cstrong\u003eRFTS\u003c\/strong\u003e \u003cstrong\u003etechnology\u003c\/strong\u003e (Unique Real Feel Trigger System), where a separate spring mechanism simulates the trigger response of a real AK74. Jefftron worked with a gunsmith specializing in firearms to design the RFTS for a realistic trigger feel.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTwo-stage trigger\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn addition to the RFTS solution, this product includes a new \"two-stage trigger\" with a realistic pre-travel and a distinct break point.\u003c\/p\u003e\n\u003cp\u003eThe two-stage trigger is an adapter made from 3D-printed plastic and spring steel that replicates the behavior of a two-stage trigger found in real firearms, allowing the user to know exactly when the shot will fire. This improves accuracy and creates a realistic shooting feel.\u003c\/p\u003e\n\u003cp\u003eThe two-stage trigger operates in two clearly defined stages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIn the first stage, the trigger is pulled smoothly until it hits the wall.\u003c\/li\u003e\n\u003cli\u003eIn the second stage, the trigger weight increases until the wall breaks.\u003c\/li\u003e\n\u003cli\u003eThe \"click\" of the second stage fires the shot.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis solution was designed by gunsmith Tomas Linhart, like other Jefftron RFTS-family solutions. The two-stage trigger differs from the RFTS-V3 spring system included with the Leviathan V3 and offers an improved trigger response. It is also more compatible with different gearbox models than the traditional RFTS spring system. For example, it fits Retro Arms gearboxes directly without modifications.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe Leviathan series offers various expansion options through an output port on the board. (Installing additional accessories requires soldering on the PCB. Leave modifications to a professional.)\u003c\/p\u003e\n\u003cp\u003eThe Leviathan brings a wide range of new features to your AEG and improves existing ones. With this unit, you can control your gun’s fire modes, rate of fire (ROF), pre-cocking, active braking, protect LiPo\/LiFe batteries from over-discharge, and much more.\u003c\/p\u003e\n\u003cp\u003eThe Leviathan unit is installed entirely inside the version 3 gearbox, replacing the traditional trigger switch assembly. The unit comes with pre-installed wiring, including a 40A mini fuse and Deans\/T-connectors. No soldering is required for the basic installation!\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eWhat features does the Leviathan unit provide?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust and add all fire modes in any selector position (SAFE - SEMI - AUTO).\u003c\/li\u003e\n\u003cli\u003eThree different burst fire modes. Each mode’s burst length can be set between 2 - 20 rounds.\u003c\/li\u003e\n\u003cli\u003eOption to stop firing when the magazine is empty. Magazine change can be signaled to the gun via an additional switch (sold separately).\u003c\/li\u003e\n\u003cli\u003eLimit the gun’s rate of fire by adding pauses between shots while maintaining an extremely fast trigger response.\u003c\/li\u003e\n\u003cli\u003eAdjustable active brake strength, which can also be disabled.\u003c\/li\u003e\n\u003cli\u003e\"Pre-cocking\" function for instant semi-auto response.\u003c\/li\u003e\n\u003cli\u003eOption to add a delay between shots to simulate the effect of recoil on shooting speed. Delay can be set between 0.1 - 4 seconds.\u003c\/li\u003e\n\u003cli\u003eLow voltage warning when using LiPo or LiFe batteries. Works with 2S - 4S LiPo and 3S - 4S LiFe batteries.\u003c\/li\u003e\n\u003cli\u003eStore multiple configuration profiles.\u003c\/li\u003e\n\u003cli\u003eSoftware displays actual battery voltage with a color-coded indicator for charge level.\u003c\/li\u003e\n\u003cli\u003eThree separate shot counters: total lifetime shots, user-resettable counter, and a counter that resets when the battery is disconnected.\u003c\/li\u003e\n\u003cli\u003eError log records all errors during the unit’s lifetime.\u003c\/li\u003e\n\u003cli\u003eLeviathan V3 monitors current, voltage, and temperature, protecting components from damage in case of failure.\u003c\/li\u003e\n\u003cli\u003eMotor vibrates and beeps to provide feedback to the user.\u003c\/li\u003e\n\u003cli\u003eSettings are saved in real time to the Leviathan V3 memory, so you won’t lose them if Bluetooth disconnects or the battery is removed during adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProgrammable fire modes:\u003cbr\u003e\n\u003c\/strong\u003e\u003cem\u003eEach mode below can be assigned to any selector position (SAFE - SEMI - AUTO).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAFE: Trigger pull does nothing, gun is on safe.\u003c\/li\u003e\n\u003cli\u003eSEMI: Fires one shot per trigger pull.\u003c\/li\u003e\n\u003cli\u003eSEMI\/BurstX: Short pull fires one shot, long pull fires a preset burst.\u003c\/li\u003e\n\u003cli\u003e\"Double trigger\": Fires once on pull and once on release (two shots per pull).\u003c\/li\u003e\n\u003cli\u003eBurstX: Fires a burst with one pull.\u003c\/li\u003e\n\u003cli\u003eBurstX\/BurstY: Short pull fires burstX, long pull fires burstX followed by burstY.\u003c\/li\u003e\n\u003cli\u003eBurstX\/Full: Short pull fires burstX, long pull fires full auto.\u003c\/li\u003e\n\u003cli\u003eFull: Fires full auto as long as the trigger is held.\u003c\/li\u003e\n\u003cli\u003eVirtual reload: Pull the trigger to virtually reload the magazine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Leviathan circuit is coated with lacquer for water protection.\u003c\/li\u003e\n\u003cli\u003ePre-cocking requires an anti-reversal latch in the gearbox.\u003c\/li\u003e\n\u003cli\u003eDesigned to operate with batteries up to 17V. Compatible with 8.4 - 12V NiMH and 7.4 - 14.8V lithium-based batteries.\u003c\/li\u003e\n\u003cli\u003eParts removed during installation: cut-off lever, original trigger, switch contacts, and safety parts. The original trigger can still be used with the Leviathan board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLeviathan manual:\u003c\/strong\u003e Download the installation and user manual \u003ca title=\"manual_leviathan-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_leviathan-V3.pdf\"\u003eHERE\u003c\/a\u003e \u003cpdf mb englanti\u003e\u003c\/pdf\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownload the Leviathan app:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.jefftron.net\/application\"\u003ehttps:\/\/www.jefftron.net\/application\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003cbr\u003e\n\u003c\/strong\u003e\u003cbr\u003e\n- Leviathan - V3 Optical with Deans\/T connector and 40A fuse slot. Motor wires with standard motor connectors.\u003cbr\u003e\n- Screw set for securing Leviathan inside the gearbox.\u003cbr\u003e\n- Foam pad for trigger sensitivity adjustment.\u003cbr\u003e\n- RFTS mechanism for realistic trigger feel.\u003cbr\u003e\n- English installation manual.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/leviathan.png\" alt=\"Leviathan banner\"\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/youtu.be\/fIbqSugvzbU\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY INSTRUCTIONS:\u003c\/strong\u003e\u003cbr\u003e\n- Installing the unit inside the gearbox requires knowledge of airsoft gun mechanics.\u003cbr\u003e\n- Read the manual before installation to avoid damage!\u003cbr\u003e\n- A short circuit or incorrect battery connection will immediately damage the unit! Incorrect wiring voids the warranty and may cause the battery to explode!\u003cbr\u003e\n- Always disconnect the battery when the gun is not in use! Otherwise, the unit may slowly drain the battery, rendering it unusable. When connected, Leviathan draws a small standby current.\u003cbr\u003e\n- Always ensure the barrel is pointed in a safe direction before connecting the battery!\u003cbr\u003e\n- Do not modify, repair, or expose the Leviathan V3 board to liquids or heat.\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237938024796,"sku":"0750122153558","price":149.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/leviathan-v3_97ebb9b6-f2d9-4b54-8263-01579e9d08f5.jpg?v=1743390254"},{"product_id":"jefftron-leviathan-v2-optinen-johdotus-taakse-cnc-m4-m16-classic-liipaisin","title":"Jefftron Leviathan V2, optical (rear wiring + CNC M4\/M16 Classic trigger)","description":"\u003cp\u003e\u003cstrong\u003eNOTE! The product comes with a classic M4\/M16 style trigger (image shows Speed Trigger).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe optical version 2 compatible Jefftron Leviathan is one of the most advanced microprocessor-controlled ETU (electronic trigger unit) boards on the airsoft market. The Jefftron Leviathan V2 Optical monitors the gear position in real time using \u003cstrong\u003etwo optical sensors\u003c\/strong\u003e. The Leviathan unit can be easily programmed via \u003cstrong\u003eBluetooth\u003c\/strong\u003e using a smartphone (iOS or Android).\u003c\/p\u003e\n\u003cp\u003eThe included CNC-machined aluminum adjustable special trigger allows you to set the trigger pull to as little as \u003cstrong\u003e0.13mm\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003eThe V2 designation means this unit is compatible with all electric airsoft guns using a version 2 gearbox. Leviathan adds a wide range of new features to your AEG and improves existing functions. With this unit, you can control your gun’s fire modes, rate of fire (ROF), pre-cocking, active braking, protect LiPo\/LiFe batteries from over-discharge, and much more.\u003c\/p\u003e\n\u003cp\u003eThe Leviathan unit is fully installed inside the version 2 gearbox, replacing the traditional trigger mechanism contacts. The unit comes pre-wired with complete wiring, including a 40A mini fuse and Deans\/T-connectors. No soldering is required during installation!\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eWhat features does the Leviathan unit provide?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust and add all fire modes to any selector position (SAFE - SEMI - AUTO).\u003c\/li\u003e\n\u003cli\u003eThree different burst fire modes. Each burst length adjustable between 2 - 20 rounds.\u003c\/li\u003e\n\u003cli\u003eOption to stop firing when the magazine is empty. Magazine change can be signaled to the unit via an external switch (sold separately).\u003c\/li\u003e\n\u003cli\u003eLimit the rate of fire by adding motor pauses between shots. This keeps trigger response extremely fast while reducing full-auto speed via software.\u003c\/li\u003e\n\u003cli\u003eAdjustable active brake strength, which can also be disabled.\u003c\/li\u003e\n\u003cli\u003e\"Pre-cocking\" function for instant semi-auto response without delay.\u003c\/li\u003e\n\u003cli\u003eOption to add a delay between shots to simulate the effect of recoil on firing speed. Delay adjustable between 0.1 - 4 seconds.\u003c\/li\u003e\n\u003cli\u003eLow voltage warning for LiPo or LiFe batteries. Works with 2S - 4S LiPo and 3S - 4S LiFe batteries.\u003c\/li\u003e\n\u003cli\u003eUser can save multiple configuration profiles.\u003c\/li\u003e\n\u003cli\u003eSoftware displays actual battery voltage with a color-coded indicator for charge level.\u003c\/li\u003e\n\u003cli\u003eThree separate shot counters: total lifetime shots, user-resettable counter, and one that resets when the battery is disconnected.\u003c\/li\u003e\n\u003cli\u003eError log records all errors during the unit’s lifetime.\u003c\/li\u003e\n\u003cli\u003eLeviathan V2 monitors current, voltage, and temperature, protecting components from damage in case of failure.\u003c\/li\u003e\n\u003cli\u003eMotor vibrates and beeps to provide feedback to the user.\u003c\/li\u003e\n\u003cli\u003eProgramming settings are saved in real time to Leviathan V2 memory, so you won’t lose settings if Bluetooth disconnects or the battery is removed during adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProgrammable fire modes:\u003cbr\u003e\n\u003c\/strong\u003e\u003cem\u003eEach mode below can be assigned to any selector position (SAFE - SEMI - AUTO).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAFE: Trigger pull does nothing, gun is on safe.\u003c\/li\u003e\n\u003cli\u003eSEMI: Fires one shot per trigger pull.\u003c\/li\u003e\n\u003cli\u003eSEMI\/BurstX: Short pull fires one shot, long pull fires a preset burst.\u003c\/li\u003e\n\u003cli\u003e\"Double trigger\": Fires once on pull and once on release (two shots per full pull).\u003c\/li\u003e\n\u003cli\u003eBurstX: Fires a burst with one trigger pull.\u003c\/li\u003e\n\u003cli\u003eBurstX\/BurstY: Short pull fires burstX, long pull fires burstX followed by burstY.\u003c\/li\u003e\n\u003cli\u003eBurstX\/Full: Short pull fires burstX, long pull fires full-auto.\u003c\/li\u003e\n\u003cli\u003eFull: Fires full-auto as long as the trigger is held.\u003c\/li\u003e\n\u003cli\u003eVirtual reload: Pull the trigger to virtually reload the magazine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes CNC-machined trigger with adjustable pull length via set screw.\u003c\/li\u003e\n\u003cli\u003eElectronic board coated with lacquer for water protection.\u003c\/li\u003e\n\u003cli\u003ePre-cocking function requires an anti-reversal latch to prevent reverse gear rotation.\u003c\/li\u003e\n\u003cli\u003eDesigned to operate with batteries up to 17V. Compatible with 8.4 - 12V NiMH and 7.4 - 14.8V lithium-based batteries.\u003c\/li\u003e\n\u003cli\u003eParts removed from gearbox during installation: cut-off lever, original trigger, contact set, and safety parts. Original trigger can be used with Leviathan board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLeviathan manual:\u003c\/strong\u003e Download the installation and user manual \u003ca title=\"manual_leviathan-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_leviathan-V2_optical.pdf\"\u003eHERE\u003c\/a\u003e \u003cpdf mb englanti\u003e\u003c\/pdf\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownload Leviathan app:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.jefftron.net\/application\"\u003ehttps:\/\/www.jefftron.net\/application\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003cbr\u003e\n- Leviathan V2 Optical rear-wired with Deans\/T-connector and 40A fuse slot. Motor wires with standard motor connectors.\u003cbr\u003e\n- CNC-machined black classic curved M4\/M16 style trigger with adjustable travel.\u003cbr\u003e\n- Screw set for securing Leviathan inside the gearbox.\u003cbr\u003e\n- Foam pad for Leviathan installation.\u003cbr\u003e\n- English installation guide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY INSTRUCTIONS:\u003c\/strong\u003e\u003cbr\u003e\n- Installing the unit inside a gearbox requires knowledge and skill in airsoft gun mechanics.\u003cbr\u003e\n- Read the manual before installation to avoid damage!\u003cbr\u003e\n- Short circuit or incorrect battery connection will immediately damage the unit! Incorrect wiring voids warranty and may cause battery explosion!\u003cbr\u003e\n- Always disconnect the battery when the gun is not in use! Otherwise, the unit may slowly drain the battery, rendering it unusable. When connected, Leviathan draws a small standby current.\u003cbr\u003e\n- Always ensure the barrel is pointed in a safe direction before connecting the battery!\u003cbr\u003e\n- Do not modify, repair, or expose the Leviathan V2 board to liquids or heat.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=ReY-9nVii8Q\u003c\/p\u003e\n\u003ch2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/leviathan-v2_optical_scheme_stock.png\"\u003e\u003cimg style=\"color: #333333; font-size: 16px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/leviathan.png\" alt=\"Leviathan banner\"\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237938843996,"sku":"0750122152001","price":159.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/clasic-trigger-black-back.jpg?v=1743390276"},{"product_id":"jefftron-wire-holders-rataslaatikon-johtokiinnike-10kpl","title":"Jefftron Wire holders, gearbox wire holder (10pcs)","description":"\u003cp\u003eThese holders make it easier to install Jefftron Leviathan-V2 units and other electronic boards into the gearbox. They keep the wires in place during gearbox assembly.\u003cbr\u003e\n2 holders are enough to complete the task.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for Leviathan-V2 optical electronic units\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor gearboxes with a wider wire channel (Retroarms), the ends of the holders can be widened using pliers.\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237959618908,"sku":"750122153244","price":8.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/wires-holder.jpg?v=1743391146"},{"product_id":"jefftron-hair-trigger-adapteri-leviathan-v2-yksikolle","title":"Jefftron \"Hair trigger\" adapter for Leviathan V2 unit","description":"\u003cp\u003e3D-printed \"hair trigger\" for CNC trigger in M4\/M16 (MP5\/G3) compatible AEGs equipped with a Jefftron Leviathan unit. This adapter allows the shot to be fired with an extremely short trigger pull, only 0.15 mm of travel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for the following Leviathan-V2 optical trigger mechanisms:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLeviathan-V2 optical to stock\u003c\/li\u003e\n\u003cli\u003eLeviathan-V2 optical to front\u003c\/li\u003e\n\u003cli\u003eLeviathan-V2 optical to stock (Gelblaster version)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe adapter is a 3D-printed part (SLA printer)\u003c\/li\u003e\n\u003cli\u003eIntended only for installing a Jefftron CNC trigger in the M4\/M16 (MP5\/G3) series.\u003c\/li\u003e\n\u003cli\u003eThe adjustment screw on the trigger does not need to be used; it is only for fine-tuning the hair trigger.\u003c\/li\u003e\n\u003cli\u003eAttach the adapter and screw position with very strong adhesive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePACKAGE INCLUDES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3D-printed hair trigger adapter\u003c\/li\u003e\n\u003cli\u003eQR code for online instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWARNING: The trigger must be installed by a professional who knows how to properly disassemble and reassemble the replica. The mechanical safety lock of this trigger does not work in the \"safe\" position.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/shorts\/TE2lU0kyggs\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/shorts\/uSQGdz0PM8Q\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237959848284,"sku":"750122153169","price":3.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/hair-trigger-adapter-back.jpg?v=1743391162"}],"url":"https:\/\/atom-airsoft.fi\/en-no\/collections\/electrical-parts.oembed","provider":"Atom Airsoft","version":"1.0","type":"link"}