{"product_id":"polarstar-f2-g-p-cyma-m14-hpa-conversion-kit","title":"Polarstar F2 G\u0026P Cyma M14 HPA Conversion Kit","description":"\u003ch2\u003ePolarstar F2 G\u0026amp;P Cyma M14 HPA Conversion Kit\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Polarstar F2 G\u0026amp;P Cyma M14 HPA Conversion Kit is a model-specific, semi-automatic HPA conversion system designed for compatible G\u0026amp;P and CYMA M14 airsoft rifles. The kit replaces the original pneumatic and mechanical firing components inside the AEG gearbox with a compact dual-solenoid PolarStar F2 Offset engine.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eM14 gearboxes use a vertically offset nozzle arrangement, which prevents a conventional centre-line HPA engine from aligning correctly with the hop-up chamber. This version of the F2 has a specially designed offset front cylinder and an O-5 offset nozzle for the G\u0026amp;P\/CYMA M14 configuration.\u003c\/p\u003e\n\n\u003ch3\u003eF2 performance for an offset-nozzle M14\u003c\/h3\u003e\n\n\u003cp\u003eThe F2 Offset uses the same rear cylinder, poppet valve and principal internal components as the standard PolarStar F2. Its redesigned front cylinder allows the nozzle to operate above or below the engine centre line, making the system suitable for replicas such as the M14 that cannot use a conventional centre-line HPA engine.\u003c\/p\u003e\n\n\u003cp\u003eThe front cylinder has two pin tracks that support different offset-nozzle positions. Its two-piece nozzle incorporates a stainless-steel support pin that stabilises the longer nozzle and reduces vertical movement during loading. This helps position each BB consistently in the hop-up chamber.\u003c\/p\u003e\n\n\u003ch3\u003eIndependent nozzle and air control\u003c\/h3\u003e\n\n\u003cp\u003eThe F2 uses two solenoids: one controls the nozzle movement and the other controls the poppet valve that releases the firing air. The FCU allows these functions to be adjusted independently.\u003c\/p\u003e\n\n\u003cp\u003eThis provides control over settings such as nozzle dwell, poppet dwell and loading timing. The firing sequence can also be configured for true closed-bolt operation or AEG-style operation. These settings describe the loading sequence of the HPA engine; this particular G\u0026amp;P\/CYMA M14 conversion remains semi-automatic only.\u003c\/p\u003e\n\n\u003ch3\u003eTrue closed-bolt operation\u003c\/h3\u003e\n\n\u003cp\u003eIn true closed-bolt mode, the BB is already chambered and the nozzle is forward before the trigger is pulled. Pulling the trigger releases the firing air, after which the nozzle cycles to load the next BB.\u003c\/p\u003e\n\n\u003cp\u003eThis operating sequence provides a consistent starting position for each shot. AEG mode is also available through the FCU when a different loading sequence is preferred.\u003c\/p\u003e\n\n\u003ch3\u003eSpring-loaded offset nozzle\u003c\/h3\u003e\n\n\u003cp\u003eThe F2 nozzle is spring-biased forward. This gives the nozzle a consistent loading force that does not depend directly on the operating pressure.\u003c\/p\u003e\n\n\u003cp\u003ePolarStar also offers optional light and heavy nozzle springs for adjusting loading force when required by the magazine, hop-up bucking or build configuration.\u003c\/p\u003e\n\n\u003ch3\u003eAdjustable power and efficient air use\u003c\/h3\u003e\n\n\u003cp\u003eThe recommended operating-pressure range is 45-145 PSI. Muzzle energy and velocity are adjusted primarily by changing the output pressure of the HPA regulator, so different power levels can be achieved without replacing the nozzle.\u003c\/p\u003e\n\n\u003cp\u003eThe actual output depends on the inner-barrel length and diameter, hop-up components, air seal, ammunition and installation quality. The replica must always be measured with a chronograph after installation and adjusted to comply with the applicable field limits.\u003c\/p\u003e\n\n\u003cp\u003eThe lightweight one-piece poppet valve is designed to operate at relatively low pressure and air volume. PolarStar’s reference testing for the F2 achieved more than 1,000 shots from a 13\/3000 tank at 1.5 joules with 0.28 g BBs, although the result in an M14 installation will vary according to the complete setup.\u003c\/p\u003e\n\n\u003ch3\u003eModel-specific M14 configuration\u003c\/h3\u003e\n\n\u003cp\u003eThis kit is configured for compatible G\u0026amp;P and CYMA M14 replicas. It uses the PolarStar O-5 offset nozzle and includes the electronic components required for the M14 trigger installation.\u003c\/p\u003e\n\n\u003cp\u003eM14 replicas from different manufacturers do not necessarily use the same nozzle length or internal dimensions. This kit is therefore not the correct version for G\u0026amp;G or Tokyo Marui M14 rifles:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eG\u0026amp;P and CYMA M14: this O-5 configuration\u003c\/li\u003e\n\u003cli\u003eG\u0026amp;G M14: separate O-1 version required\u003c\/li\u003e\n\u003cli\u003eTokyo Marui M14: separate O-12 version required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCompatibility should be verified before installation, particularly if the rifle contains a gearbox shell, hop-up chamber or other internal components from a different manufacturer.\u003c\/p\u003e\n\n\u003ch3\u003eSemi-automatic configuration\u003c\/h3\u003e\n\n\u003cp\u003eThis G\u0026amp;P\/CYMA M14 kit is configured for semi-automatic fire. It does not provide selectable fully automatic fire in this installation.\u003c\/p\u003e\n\n\u003cp\u003eThe FCU may include settings for rate of fire, burst operation and selector behaviour because the same control system is used in several PolarStar configurations. These settings do not add a functioning full-auto selector to this M14 conversion.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\n\u003cp\u003eThe F2 is installed inside the original gearbox shell after the gears, piston, cylinder assembly and other unnecessary AEG components have been removed. The original trigger and safety components are retained or adapted as required by the installation.\u003c\/p\u003e\n\n\u003cp\u003eInstalling this conversion requires complete disassembly of the replica, modification or fitting of internal components, correct routing of the air line and wiring, and careful alignment of the nozzle with the hop-up chamber and inner barrel.\u003c\/p\u003e\n\n\u003cp\u003eMinor modifications may be required to achieve correct fitment and practical air-line routing. The nozzle must be centred in the hop-up chamber and the gearbox must close without pinching the solenoid wires or FCU harness.\u003c\/p\u003e\n\n\u003cp\u003eInstallation should be performed by a technician familiar with HPA systems and M14 gearbox construction. The air source and battery must always be disconnected before disassembly, adjustment or alignment work.\u003c\/p\u003e\n\n\u003ch3\u003eRequired additional equipment\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eCompatible G\u0026amp;P or CYMA M14 airsoft rifle\u003c\/li\u003e\n\u003cli\u003eHPA tank filled with compressed air or nitrogen\u003c\/li\u003e\n\u003cli\u003eSuitable HPA regulator capable of supplying 45-145 PSI\u003c\/li\u003e\n\u003cli\u003eCompatible remote air line and fittings\u003c\/li\u003e\n\u003cli\u003e7.4 V LiPo battery for the FCU\u003c\/li\u003e\n\u003cli\u003eSuitable LiPo battery charger\u003c\/li\u003e\n\u003cli\u003eChronograph for setting the muzzle energy\u003c\/li\u003e\n\u003cli\u003eTechnical installation and any required fitting work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eModel-specific HPA conversion for compatible G\u0026amp;P and CYMA M14 rifles\u003c\/li\u003e\n\u003cli\u003eSemi-automatic configuration\u003c\/li\u003e\n\u003cli\u003eCompact dual-solenoid F2 Offset engine\u003c\/li\u003e\n\u003cli\u003eO-5 two-piece offset nozzle\u003c\/li\u003e\n\u003cli\u003eStainless-steel nozzle support pin\u003c\/li\u003e\n\u003cli\u003eReduced vertical movement of the extended nozzle\u003c\/li\u003e\n\u003cli\u003eIndependent adjustment of nozzle and poppet-valve timing\u003c\/li\u003e\n\u003cli\u003eTrue closed-bolt and AEG-style operating sequences\u003c\/li\u003e\n\u003cli\u003eSpring-biased nozzle for consistent loading force\u003c\/li\u003e\n\u003cli\u003eOperating-pressure range of 45-145 PSI\u003c\/li\u003e\n\u003cli\u003ePower adjusted through regulator pressure\u003c\/li\u003e\n\u003cli\u003eEfficient one-piece poppet-valve design\u003c\/li\u003e\n\u003cli\u003eFilter fitting installed on the engine\u003c\/li\u003e\n\u003cli\u003eFCU-controlled electronic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003ePolarStar F2 Offset HPA engine configured for G\u0026amp;P\/CYMA M14\u003c\/li\u003e\n\u003cli\u003eO-5 offset nozzle assembly\u003c\/li\u003e\n\u003cli\u003eStainless-steel nozzle support pin\u003c\/li\u003e\n\u003cli\u003eInstalled PolarStar filter fitting\u003c\/li\u003e\n\u003cli\u003eFCU control unit\u003c\/li\u003e\n\u003cli\u003eUniversal plugboard with trigger leads\u003c\/li\u003e\n\u003cli\u003e18\" wire harness\u003c\/li\u003e\n\u003cli\u003eModel-specific conversion components supplied by PolarStar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eM14 airsoft rifle\u003c\/li\u003e\n\u003cli\u003eHPA tank\u003c\/li\u003e\n\u003cli\u003eHPA regulator\u003c\/li\u003e\n\u003cli\u003eRemote air line\u003c\/li\u003e\n\u003cli\u003eFCU battery\u003c\/li\u003e\n\u003cli\u003eBattery charger\u003c\/li\u003e\n\u003cli\u003eInstallation service\u003c\/li\u003e\n\u003cli\u003eTools or other components shown in installation examples\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eManual\u003c\/h3\u003e\n\n\u003cp\u003eRead the official PolarStar F2 manual before installation, adjustment or use:\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/F2_Instructions-06252021.pdf?v=1628355326\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003ePolarStar F2 instruction manual (PDF)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eManufacturer: PolarStar\u003c\/li\u003e\n\u003cli\u003eProduct: F2 G\u0026amp;P Cyma M14 HPA Conversion Kit\u003c\/li\u003e\n\u003cli\u003eProduct type: electronic HPA conversion system\u003c\/li\u003e\n\u003cli\u003eEngine type: F2 Offset\u003c\/li\u003e\n\u003cli\u003eCompatible replicas: compatible G\u0026amp;P and CYMA M14 models\u003c\/li\u003e\n\u003cli\u003eGearbox type: M14 \/ Version 7-type offset-nozzle installation\u003c\/li\u003e\n\u003cli\u003eNozzle: PolarStar O-5 offset nozzle\u003c\/li\u003e\n\u003cli\u003eOperating system: dual solenoid\u003c\/li\u003e\n\u003cli\u003eFiring mode in this configuration: semi-automatic\u003c\/li\u003e\n\u003cli\u003eOperating sequence: true closed bolt or AEG mode\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 45-145 PSI\u003c\/li\u003e\n\u003cli\u003eControl unit: FCU\u003c\/li\u003e\n\u003cli\u003eTrigger interface: universal plugboard with trigger leads\u003c\/li\u003e\n\u003cli\u003eWire-harness length: 18\"\u003c\/li\u003e\n\u003cli\u003eRecommended FCU battery: 7.4 V LiPo\u003c\/li\u003e\n\u003cli\u003ePower source: external HPA system and FCU battery\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PolarStar Engineering \u0026 Machine, LLC","offers":[{"title":"Default Title","offer_id":58558280565084,"sku":"10000741","price":578.39,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/PolarstarF2OffsetHPAConversionKit.png?v=1786022021","url":"https:\/\/atom-airsoft.fi\/en-nl\/products\/polarstar-f2-g-p-cyma-m14-hpa-conversion-kit","provider":"Atom Airsoft","version":"1.0","type":"link"}