{"title":"HPA engines","description":"\u003cp\u003eHPA units (High Pressure Air) offer airsoft enthusiasts an excellent alternative to traditional power sources such as electric and gas guns. They enable consistent velocity, crisp trigger response, and wide adjustability, which improve a gun’s performance and reliability.\u003c\/p\u003e\n\u003cp\u003eIn our selection you will find high-quality HPA units from well-known manufacturers such as Wolverine Airsoft, PolarStar, Mancraft and GATE. For example, Wolverine Airsoft’s INFERNO Gen 2 and PolarStar’s Fusion Engine™ deliver top-tier performance and tunability. Mancraft’s SDiK and PDiK series, on the other hand, provide mechanical solutions for precision rifles without electronic components.\u003c\/p\u003e\n\u003cp\u003eHPA units are compatible with many airsoft platforms, including M4, AK, VSR-10 and L96 models. They allow you to tailor your gun’s performance to your playstyle and environment.\u003c\/p\u003e\n\u003cp\u003eUpgrading your gun with an HPA unit can give you more consistent performance, better accuracy and longer service life.\u003c\/p\u003e","products":[{"product_id":"wolverine-airsoft-bolt-hpa-yksikko","title":"Wolverine Airsoft BOLT HPA Unit","description":"\u003cp\u003eWolverine Airsoft BOLT HPA conversion kits are designed for bolt-action sniper rifles, with the first released model compatible with VSR-10 and Echo1 M28.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e* The Bolt operates electropneumatically: it requires a battery but \u003cstrong\u003edoes not\u003c\/strong\u003e need an FCU. In other words, the trigger mechanism is simply connected directly to the battery. When the trigger is pulled, voltage is applied to the solenoid, the valve closes, and the rifle fires. Thanks to the simple mechanics, the system does not require a power-consuming FCU.\u003cbr\u003e\n* Specially designed 3\/2 solenoid valve for the Bolt, engineered by Wolverine Airsoft and manufactured by MAC, a leading industrial pneumatics solenoid valve manufacturer.\u003cbr\u003e\n* No moving parts: during firing, only the solenoid valve moves!\u003cbr\u003e\n* Patented Air Saver™ Technology: Enables up to 50% air consumption savings from the barrel air volume and allows adjustment of air usage according to the system’s barrel volume.\u003cbr\u003e\n* One-piece aluminum bolt simplifies installation, especially in rifles where the cylinder head is pinned (Marui VSR-10).\u003cbr\u003e\n* The HPA system can also be used with a CO2 cartridge placed inside the rifle stock using an optional accessory sold separately. One cartridge allows approximately 150 shots at over 2J power.\u003cbr\u003e\n* Operating pressure: 80-180 psi.\u003cbr\u003e\n* Muzzle energy: 1-4+ J, depending on barrel length, tightness, and BB weight.\u003c\/p\u003e\n\u003cp\u003eCompatibility:\u003c\/p\u003e\n\u003cp\u003eBOLT is specifically designed to fit the Tokyo Marui VSR-10 and its identical clones, such as JG BAR-10 and Well MB03.\u003c\/p\u003e\n\u003cp\u003e“BOLT without Wolverine’s cylinder” also works in the Echo1 M28 airsoft rifle.\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54236506816860,"sku":"BLT-CA-001-TM-SKU","price":399.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/wolverine-airsoft-bolt-2.jpg?v=1743362268"},{"product_id":"mancraft-sdik-paineilmakoneisto-l96-sarjalle-mb-01-04-05-08","title":"Mancraft SDiK HPA conversion kit for L96 series (MB-01\/04\/05\/08¦)","description":"\u003cp\u003eMancraft SDiK Air System for L96 Series (MB-01\/04\/05\/08…).\u003cbr\u003e\nSDIK – “Sniper Drop in Kit” is a high-quality, fully mechanical and reliable HPA \/ CO2 conversion kit designed specifically for L96-style sniper rifles (e.g., Well MB-01 and MB-08). With SDiK, it is possible to upgrade a sniper rifle very cost-effectively, even to the highest power levels. Thanks to its operating principle, the bolt pull remains extremely light despite the high power output.\u003cbr\u003e\nNote! In addition to the SDiK, you will need a regulator, an air tank, and suitable fittings!\u003c\/p\u003e\n\u003cp\u003eMancraft is a Polish manufacturer that started around 2012. The company specializes in single-shot and mechanical air-powered conversion kits. Mancraft products are designed with an extremely simple operating principle, making them highly reliable.\u003c\/p\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54236513108316,"sku":"MC0039.28","price":179.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/36298.png?v=1743362425"},{"product_id":"mancraft-sdik-paineilmakoneisto-vsr-10-sarjalle-45-asteen-liipaisinkoneisto","title":"Mancraft SDiK HPA conversion kit for VSR-10 series, 45 degree trigger mechanism","description":"\u003cp\u003eMancraft SDiK HPA System for VSR-10 Series, 45-Degree Trigger Mechanism\u003c\/p\u003e\n\u003cp\u003eSDiK – “Sniper Drop in Kit” is a high-quality, fully mechanical and reliable HPA \/ CO2 conversion kit for VSR-10 compatible sniper rifles. With SDiK, it is possible to upgrade a sniper rifle very cost-effectively, even to the highest power levels. Thanks to its operating principle, the bolt pull remains extremely light despite the high power output.\u003c\/p\u003e\n\u003cp\u003eNote! In addition to the SDiK, you will need a regulator, an air tank, and suitable fittings!\u003c\/p\u003e\n\u003cp\u003eSDiK kits come equipped with a 4mm hose!\u003c\/p\u003e\n\u003cp\u003eMancraft is a Polish manufacturer that started around 2012. Mancraft specializes in single-shot and mechanical air-powered conversion kits. The operating principle of Mancraft products is kept extremely simple, making them highly reliable.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54236514582876,"sku":"MC0039.29","price":179.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/36299.png?v=1743362542"},{"product_id":"mancraft-sdik-paineilmakoneisto-vsr-10-sarjalle-90-asteen-liipaisinkoneisto","title":"Mancraft SDiK HPA conversion kit for VSR-10 series, 90 degree trigger mechanism","description":"\u003cp\u003eMancraft SDiK Air System for VSR-10 Series, 90-Degree Trigger Mechanism\u003c\/p\u003e\n\u003cp\u003eNote! This kit is intended for use with a 90-degree trigger mechanism!\u003c\/p\u003e\n\u003cp\u003eSDiK – “Sniper Drop-in Kit” is a high-quality, fully mechanical and reliable HPA \/ CO2 conversion kit for VSR-10 compatible sniper rifles. With SDiK, it is possible to upgrade a sniper rifle very cost-effectively, even to the highest power levels. Thanks to its operating principle, the bolt pull remains extremely light despite the high power output.\u003c\/p\u003e\n\u003cp\u003eNote! In addition to the SDiK, you will need a regulator, an air tank, and suitable fittings!\u003c\/p\u003e\n\u003cp\u003eMancraft is a Polish manufacturer that started around 2012. Mancraft specializes in single-shot and mechanical air-powered conversion kits. The operating principle of Mancraft products is kept extremely simple, making them highly reliable.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54236515631452,"sku":"MC0039.50","price":179.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/36299_1201a5c2-ff91-41f3-9836-66110dd91492.png?v=1743362556"},{"product_id":"wolverine-airsoft-inferno-premium-v2-gen-2-m4-suuttimella","title":"Wolverine Airsoft Inferno Premium V2 (GEN 2), M4 with nozzle","description":"\u003cp\u003eThe Inferno GEN 2 takes HPA airsoft technology to a whole new level. A few years ago, Wolverine Airsoft released the SMP pneumatic system, which proved to be a great success. Following the success of the SMP, similar products from competing manufacturers appeared on the market, as the technology used in the SMP turned out to be highly effective. The release of the Inferno Gen2 once again changes the competitive landscape, just like the SMP did.\u003c\/p\u003e\n\u003cp\u003eThe GEN 2 Inferno combines a single-solenoid system with an independently moving “poppet valve” and nozzle. The single-solenoid design ensures the easy adjustability that Wolverine products are known for. GEN 2 specifically addresses the “open bolt” issue (open bolt problem: the gun only works with stiff hop-up rubbers). The GEN2 operating principle can be described as a hybrid between open-bolt and closed-bolt systems, as GEN2 functions as open bolt from the user’s perspective, but the BB is chambered into the hop-up unit like in a closed bolt. This hybrid design allows for easy tuning, reliable feeding even on the first shot, and improved air efficiency. GEN2 uses approximately 10–15% less air compared to previous models.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented independent poppet valve and nozzle\u003c\/li\u003e\n\u003cli\u003eHybrid design allows a short pause in airflow between loading and firing the BB\u003c\/li\u003e\n\u003cli\u003eImproves hop-up performance\u003c\/li\u003e\n\u003cli\u003eCompatible with previously released Wolverine Airsoft electronics\u003c\/li\u003e\n\u003cli\u003eEstimated 10–15% increase in air efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHPA Drop-in Cylinder Replacement\u003c\/li\u003e\n\u003cli\u003eAdjustable velocity, rate of fire, and burst mode\u003c\/li\u003e\n\u003cli\u003eInstant trigger response\u003c\/li\u003e\n\u003cli\u003eFCU “full time sleep mode” – FCU consumes minimal power when the gun is idle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating pressure: 40–120 psi\u003c\/li\u003e\n\u003cli\u003eMuzzle energy: 0.5 J–3 J (depends on setup; longer barrels produce higher energy)\u003c\/li\u003e\n\u003cli\u003eRate of Fire (ROF): Adjustable: 5–40 RPS\u003c\/li\u003e\n\u003cli\u003eFire modes: Semi-auto, burst (1, 2, 3, 5, or 7 BBs), or full-auto\u003c\/li\u003e\n\u003cli\u003eTrigger delay: ~10 ms (time from trigger pull to BB exiting the barrel)\u003c\/li\u003e\n\u003cli\u003eFCU dimensions: 1.55 cm x 5.10 cm\u003c\/li\u003e\n\u003cli\u003eBattery: 7.4 V with JST connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote!\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eTo use the Wolverine HPA kit, you will also need a suitable battery for the FCU, a high-pressure air tank, and a regulator!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54236515762524,"sku":"NFR-CA-012-M4-SKU","price":509.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/inferno-scaled-1.jpg?v=1743362578"},{"product_id":"wolverine-airsoft-inferno-premium-v3-gen-2-ak-suuttimella","title":"Wolverine Airsoft Inferno Premium V3 (GEN 2), AK with nozzle","description":"\u003cp\u003eThe Inferno GEN 2 takes HPA airsoft technology to a whole new level. A few years ago, Wolverine Airsoft released the SMP pneumatic system, which proved to be a great success. Following the success of the SMP, similar products from competing manufacturers appeared on the market, as the technology used in the SMP turned out to be highly effective. The release of the Inferno Gen2 once again changes the competitive landscape, just like the SMP did.\u003c\/p\u003e\n\u003cp\u003eThe GEN 2 Inferno combines a single-solenoid system with an independently moving “poppet valve” and nozzle. The single-solenoid design ensures the easy adjustability that Wolverine products are known for. GEN 2 specifically addresses the “open bolt” issue (open bolt problem: the gun only works with stiff hop-up rubbers). The GEN2 operating principle can be described as a hybrid between open-bolt and closed-bolt systems, as GEN2 functions as open bolt from the user’s perspective, but the BB is chambered into the hop-up unit like in a closed bolt. This hybrid design allows for easy tuning, reliable feeding even on the first shot, and improved air efficiency. GEN2 uses approximately 10–15% less air compared to previous models.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented independent poppet valve and nozzle\u003c\/li\u003e\n\u003cli\u003eHybrid design enables a short pause in airflow between loading and firing the BB\u003c\/li\u003e\n\u003cli\u003eImproves hop-up performance\u003c\/li\u003e\n\u003cli\u003eCompatible with previously released Wolverine Airsoft electronic components\u003c\/li\u003e\n\u003cli\u003eEstimated 10–15% increase in air efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHPA Drop-in Cylinder Replacement\u003c\/li\u003e\n\u003cli\u003eAdjustable velocity, rate of fire, and burst mode\u003c\/li\u003e\n\u003cli\u003eInstant trigger response\u003c\/li\u003e\n\u003cli\u003eFCU “full time sleep mode” – FCU consumes minimal power when the gun is not firing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating pressure: 40–120 psi\u003c\/li\u003e\n\u003cli\u003eMuzzle energy: 0.5 J–3 J (depends on setup; longer barrels produce higher energy)\u003c\/li\u003e\n\u003cli\u003eRate of Fire (ROF): Adjustable: 5–40 RPS\u003c\/li\u003e\n\u003cli\u003eFire modes: Semi-auto, burst (1, 2, 3, 5, or 7 BBs), or full-auto\u003c\/li\u003e\n\u003cli\u003eTrigger delay: ~10 ms (time from trigger pull to BB exiting the barrel)\u003c\/li\u003e\n\u003cli\u003eFCU dimensions: 1.55 cm x 5.10 cm\u003c\/li\u003e\n\u003cli\u003eBattery: 7.4 V with JST connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote!\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eTo use the Wolverine HPA kit, you will also need a suitable battery for the FCU, a high-pressure air tank, and a regulator!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54236516122972,"sku":"NFR-CA-012-AK","price":509.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/inferno-scaled-1_07fb4f38-9169-46ce-8e79-c8df1cdd2903.jpg?v=1743362591"},{"product_id":"mancraft-pdik-versio-3","title":"Mancraft PDiK, version 3","description":"\u003cp\u003eMancraft PDiK version 3 is a high-quality, fully mechanical and reliable HPA \/ CO2 conversion kit for all version 3 compatible AEGs. With the PDiK, it is possible to build a highly cost-effective airsoft gun capable of semi-automatic fire, even for the highest upgrade levels. Includes an AK series nozzle. PDiK - \"Pneumatic Drop in Kit\"\u003c\/p\u003e\n\u003cp\u003eNote! In addition to the PDiK, you will need a regulator, an air tank, and suitable fittings! The hose included with the PDiK is a 6mm outer diameter air line, and no fittings are included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- No electronic parts\u003cbr\u003e\n- No batteries\u003cbr\u003e\n- High reliability (No gears, motor, piston, gearbox, etc. to break)\u003cbr\u003e\n- Consistent muzzle velocity\u003cbr\u003e\n- \u003cstrong\u003eNo full-auto\u003c\/strong\u003e\u003cbr\u003e\n- Adjustable muzzle velocity\u003cbr\u003e\n- Compatible parts: AEG nozzles, triggers, selector plates\u003cbr\u003e\n- External air source\u003cbr\u003e\n- Instant trigger response\u003cbr\u003e\n- 6mm Macroline\u003c\/p\u003e\n\u003cp\u003eExample muzzle velocities with a 550mm barrel and 0.20g BB:\u003c\/p\u003e\n\u003cp\u003e8 bar - 150m\/s (492fps) 2.25J\u003cbr\u003e\n10 bar - 165m\/s (541fps) 2.72J\u003cbr\u003e\n12 bar - 182m\/s (597fps) 3.31J\u003cbr\u003e\n16 bar - 203m\/s (666fps) 4.12J\u003cbr\u003e\n18 bar - 213m\/s (699fps) 4.53J\u003c\/p\u003e\n\u003cp\u003eIn reality, using heavier BBs than 0.20g will result in even higher muzzle energy!\u003c\/p\u003e\n\u003cp\u003eMancraft is a Polish manufacturer that started around 2012. The company specializes in single-shot and mechanical air-powered conversion kits. Mancraft products are designed with an extremely simple operating principle, making them highly reliable.\u003c\/p\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54236574679388,"sku":"MC0075","price":269.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/36309.png?v=1743364191"},{"product_id":"wolverine-airsoft-mtw-engine-retention-clip","title":"Wolverine Airsoft MTW Engine Retention Clip","description":"\u003cp\u003eWolverine Airsoft MTW Engine Retention Clip. This part attaches the HPA unit to the upper body.\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237149921628,"sku":"MTW-A-212-SKU","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mtw-engine-retention-clip-1000x1000.jpg?v=1743373788"},{"product_id":"mancraft-pdik-gen-3-paineilmakoneisto-v2","title":"Mancraft PDiK Gen.3 pneumatic mechanism, V2","description":"\u003cp\u003eThe Mancraft PDiK Gen.3 pneumatic system, V2 conversion kit, is designed primarily for semi-automatic airsoft sniper rifles. The PDiK Gen.3 delivers excellent performance in situations where you need to convert an airsoft gun to shoot with extreme range and accuracy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePDiK Gen.3 Mechanics:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mancraft PDiK Gen.3 pneumatic system automatically chambers a BB with every shot – just like an AEG. The unique feature of Gen.3 is that the nozzle movement is not linked to the position of the valve responsible for air supply. The advantage of this design is that during firing, the nozzle moves forward before the air blast that propels the BB begins. This results in better accuracy and performance compared to older PDiK models, as the BB briefly stops inside the hop-up chamber before the actual shot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo electronics (weather resistance), no batteries.\u003c\/li\u003e\n\u003cli\u003eConsistent muzzle velocity ensured by Gen.3 system\u003c\/li\u003e\n\u003cli\u003eOperating pressure 7–16 bar (100 psi – 232 psi)\u003c\/li\u003e\n\u003cli\u003eSemi-automatic only, no full-auto mode\u003c\/li\u003e\n\u003cli\u003eAdjustable muzzle velocity via regulator\u003c\/li\u003e\n\u003cli\u003eCompatible with standard AEG parts (nozzle, trigger, selector plate)\u003c\/li\u003e\n\u003cli\u003eInstant trigger response\u003c\/li\u003e\n\u003cli\u003eNext-generation firing valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePDiK V2 Gen.3\u003c\/li\u003e\n\u003cli\u003eApprox. 1.2 m air line (Ø 6 mm)\u003c\/li\u003e\n\u003cli\u003eThreaded block replacing the spring guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54237639541084,"sku":"5904553332166","price":289.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/36304.png?v=1743381641"},{"product_id":"mancraft-pdik-gen-3-paineilmakoneisto-cnc-rataslaatikko-v2","title":"Mancraft PDiK Gen.3 HPA conversion kit, CNC gearbox, V2","description":"\u003cp\u003eMancraft PDiK Gen.3 pneumatic system, V2 conversion kit is primarily designed for semi-automatic airsoft sniper rifles. The PDiK Gen.3 delivers excellent performance in situations where you need to convert an airsoft gun to shoot with extreme range and accuracy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePDiK Gen. 3 Mechanics:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mancraft PDiK Gen.3 pneumatic system automatically chambers a BB with every shot – just like an AEG. The unique feature of Gen.3 is that the nozzle movement is not linked to the position of the valve responsible for air supply. The advantage of this design is that during firing, the nozzle moves to the forward position before the air blast that propels the BB begins. This results in better accuracy and performance compared to older PDiK models, as the BB briefly stops inside the hop-up chamber before the actual shot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo electronics (weather resistance), no batteries.\u003c\/li\u003e\n\u003cli\u003eConsistent muzzle velocity ensured by Gen.3 system\u003c\/li\u003e\n\u003cli\u003eOperating pressure 7–16 bar (100 psi – 232 psi)\u003c\/li\u003e\n\u003cli\u003eSemi-automatic only, no full-auto mode\u003c\/li\u003e\n\u003cli\u003eAdjustable muzzle velocity via regulator\u003c\/li\u003e\n\u003cli\u003eCompatible with standard AEG parts (nozzle, trigger, selector plate)\u003c\/li\u003e\n\u003cli\u003eInstant trigger response\u003c\/li\u003e\n\u003cli\u003eNext-generation firing valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePDiK V2 Gen.3\u003c\/li\u003e\n\u003cli\u003eMancraft CNC-machined HPA gearbox (pre-installed around the system)\u003c\/li\u003e\n\u003cli\u003eApprox. 1.2 m air line (Ø 6 mm)\u003c\/li\u003e\n\u003cli\u003eThreaded block replacing the spring guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54237768876380,"sku":"5904553332142","price":319.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/36302.png?v=1743384050"},{"product_id":"mancraft-pdik-gen-3-paineilmakoneisto-cnc-rataslaatikko-v2-long-sr25","title":"Mancraft PDiK Gen.3 Air Gear, CNC gearbox, V2 Long (SR25)","description":"\u003cp\u003eThe Mancraft PDiK Gen.3 pneumatic system, V2 Long conversion kit is primarily designed for semi-automatic airsoft sniper rifles. The PDiK Gen.3 delivers excellent performance in situations where you need to convert an airsoft gun to shoot with extreme range and accuracy. The V2 Long is compatible with A\u0026amp;K \/ P\u0026amp;J \/ Classic Army \/ E\u0026amp;C SR25 type airsoft guns.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNote! The Mancraft PDiK Gen.3 pneumatic system, V2 Long is not compatible with the Cyma CM.098 rifle!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePDiK Gen.3 Mechanics:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mancraft PDiK Gen.3 pneumatic system automatically chambers a BB with every shot – just like an AEG. The unique feature of Gen.3 is that the nozzle movement is not linked to the position of the valve that controls the air supply. The advantage of this design is that during firing, the nozzle moves to the forward position before the air blast that propels the BB begins. This results in better accuracy and performance compared to older PDiK models, as the BB briefly stops inside the hop-up chamber before the actual shot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo electronics (weather resistance), no batteries.\u003c\/li\u003e\n\u003cli\u003eConsistent FPS ensured by Gen.3 system\u003c\/li\u003e\n\u003cli\u003eOperating pressure 7–16 bar (100 psi – 232 psi)\u003c\/li\u003e\n\u003cli\u003eSemi-automatic only, no full-auto mode\u003c\/li\u003e\n\u003cli\u003eAdjustable FPS via regulator\u003c\/li\u003e\n\u003cli\u003eCompatible with standard AEG parts (nozzle, trigger, selector plate)\u003c\/li\u003e\n\u003cli\u003eInstant trigger response\u003c\/li\u003e\n\u003cli\u003eNext-generation firing valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePDiK V2 Gen.3 Long\u003c\/li\u003e\n\u003cli\u003eMancraft CNC-machined HPA gearbox (pre-installed around the system)\u003c\/li\u003e\n\u003cli\u003eApprox. 1.2 m air line (Ø 6 mm)\u003c\/li\u003e\n\u003cli\u003eThreaded block replacing the spring guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54237947658588,"sku":"MCPDIKV2LONGGEN3","price":319.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/36303.png?v=1743390741"},{"product_id":"polarstar-kythera-sa-v2-m4-puoliautomaattinen","title":"Polarstar Kythera SA V2 M4 (semi-automatic)","description":"\u003cp\u003eThe Polarstar Kythera HPA system represents a completely new direction compared to all previous systems produced by PolarStar, as Kythera does not use batteries, an FCU, or any electronics. Kythera is fully mechanical. This means you don’t have to worry about charging batteries or handling delicate electronic components. It also means the system is completely submersible. Kythera is designed with exceptional ingenuity, achieving its functions with a very small number of parts.\u003c\/p\u003e\n\u003ch2\u003eRealistic Trigger\u003c\/h2\u003e\n\u003cp\u003eThe Kythera system was designed from the ground up to deliver a realistic trigger feel. The trigger mechanism is engineered to replicate the function, weight, and feel of a real single-action firearm trigger. It feels authentic because it is authentic. Hardened alloy steel sears engage a stainless steel valve, and when the trigger is pulled, the machined components release it in the same way a real firearm’s sear releases the hammer. This gives the Kythera trigger a distinct take-up and break point. The Kythera SA trigger mechanism also includes fine adjustment options to tune trigger pull weight and travel. The firing mechanism is spring-driven, so the trigger pull is not affected by the regulator pressure.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/10\/IMG_2701.webp\"\u003e\u003cimg class=\"aligncenter wp-image-646339 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_2701-1024x427.webp\" alt=\"\" width=\"1024\" height=\"427\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePerfect Firing Cycle\u003c\/h2\u003e\n\u003cp\u003eThe design of the Kythera SA ensures a complete firing cycle with every trigger pull. This provides closed-bolt performance, proven to deliver excellent consistency and accuracy in Fusion Engine and F2 systems. Kythera offers the same performance in a fully mechanical, waterproof package with a realistic trigger. Kythera does not require the trigger to be released before the nozzle chambers the next shot and refills the internal air chamber for the next cycle. This happens automatically and consistently with every shot. The nozzle’s movement is not tied to the trigger pull; its dwell time in the forward position and return speed to the rear can be adjusted independently.\u003c\/p\u003e\n\u003cp\u003eSince the system resets and recharges immediately after firing, it is ready to shoot again before the trigger is released from the previous shot. This makes double-feeding extremely unlikely.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/10\/IMG_2700_c979c70d-7c2b-465e-9423-434c48ca9970.webp\"\u003e\u003cimg class=\"aligncenter wp-image-646340 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_2700_c979c70d-7c2b-465e-9423-434c48ca9970-1024x427.webp\" alt=\"\" width=\"1024\" height=\"427\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eExceptional Efficiency and Consistency\u003c\/h2\u003e\n\u003cp\u003eThe Kythera valve design operates without the need to control the opening or closing of the valve. Excluding the small pilot valve that positions the main valve, 100% of the air supplied to the system is discharged through the nozzle, meaning all the air is used to propel the BB rather than cycle the mechanism. In addition, the system operates with extreme consistency. The valve releases at the same point and with the same force on every shot, regardless of trigger pull.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/10\/IMG_2698.webp\"\u003e\u003cimg class=\"aligncenter wp-image-646341 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_2698-1024x427.webp\" alt=\"\" width=\"1024\" height=\"427\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eUniversal Charging Cord\u003c\/h2\u003e\n\u003cp\u003eThe steel cable visible at the rear of the Kythera system is connected to the internal valve charging mechanism. Normally, pressure from the regulator automatically charges the valve. The charging cable is included so that if the input pressure drops too low to cock the valve, it can be manually charged using the cable. This typically only occurs if the system has been completely depressurized, dropping below its operating range. The cable is designed to be stored in an easily accessible location inside the receiver or attached to the rifle’s charging handle.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eEasy Installation\u003c\/h2\u003e\n\u003cp\u003eThe Kythera SA system installs as a single unit inside a standard gearbox shell and usually requires no modifications to the shell. No separate components need to be installed inside the gearbox, and the only original parts that must be retained are the trigger, spring guide, selector, and safety components.\u003c\/p\u003e\n\u003ch2\u003eWide Velocity and Power Adjustment Range\u003c\/h2\u003e\n\u003cp\u003eKythera operates within a wide pressure range of 60 psi to 180 psi, allowing fine-tuning of output power for different applications. Within this range, the rifle can be set to shoot 82–152 m\/s with a 6.05x380 mm barrel and 0.20 g BBs. This allows a single Kythera to be used in any role, from CQB to sniper, by adjusting the air rig’s input pressure.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-automatic\u003c\/li\u003e\n\u003cli\u003eDesigned from the ground up as a mechanical HPA system, not based on a solenoid-driven design\u003c\/li\u003e\n\u003cli\u003ePatented delayed valve mechanism provides excellent efficiency and consistent velocity combined with realistic trigger pull and reset\u003c\/li\u003e\n\u003cli\u003eComplete firing cycle\u003c\/li\u003e\n\u003cli\u003eAdjustable trigger (weight, travel, and overtravel)\u003c\/li\u003e\n\u003cli\u003eAdjustable nozzle dwell\/return speed\u003c\/li\u003e\n\u003cli\u003eWide operating pressure range: 60–180 psi\u003c\/li\u003e\n\u003cli\u003e6 mm macro line – Note: fitting sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: In addition to the air system, you will need a suitable air tank, regulator, air hose, and required fittings.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=fPXLkgTDpGM\u0026amp;embeds_referring_euri=https%3A%2F%2Fpolarstarairsoft.com%2F\u0026amp;source_ve_path=MjM4NTE\u0026amp;feature=emb_title\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=v9aas6uByxs\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?time_continue=1\u0026amp;v=Segay-rs7HY\u0026amp;embeds_referring_euri=https%3A%2F%2Fpolarstarairsoft.com%2F\u0026amp;source_ve_path=MjM4NTE\u0026amp;feature=emb_title\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=qjsU8_E6pF0\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=tb56MC-9QWo\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=pw7rKLoH0g4\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=t_tsMY592N4\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=8sRRtQKI2HU\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=kvlI5Ns1HyU\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237950673244,"sku":"10000774","price":339.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_2698.webp?v=1743390857"},{"product_id":"polarstar-kythera-sa-v3-ak-puoliautomaattinen","title":"Polarstar Kythera SA V3 AK (semi-automatic)","description":"\u003cp\u003eThe Polarstar Kythera HPA system represents a completely new approach compared to all previous systems produced by PolarStar, as Kythera does not use batteries, an FCU, or any electronics. Kythera is fully mechanical. This means you don’t have to worry about charging batteries or handling sensitive electronic components. It also means the system is completely submersible. Kythera is designed with exceptional ingenuity, achieving its functions with a very small number of parts.\u003c\/p\u003e\n\u003ch2\u003eRealistic Trigger\u003c\/h2\u003e\n\u003cp\u003eThe Kythera system was designed from the ground up to deliver a realistic trigger feel. The trigger mechanism is engineered to replicate the function, weight, and feel of a real single-action firearm trigger. It feels authentic because it is authentic. Hardened alloy steel sears engage a stainless steel valve, and when the trigger is pulled, the machined components release it in the same way a real firearm’s hammer sear releases the hammer. This gives the Kythera trigger a distinct take-up and break point. The Kythera SA trigger mechanism also includes fine adjustment options to tune trigger pull weight and travel. The firing mechanism is spring-driven, so the trigger pull is not affected by the regulator pressure.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/10\/IMG_2701.webp\"\u003e\u003cimg class=\"aligncenter wp-image-646339 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_2701-1024x427.webp\" alt=\"\" width=\"1024\" height=\"427\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePerfect Firing Cycle\u003c\/h2\u003e\n\u003cp\u003eThe design of the Kythera SA ensures a complete firing cycle with every trigger pull. This provides closed-bolt performance, proven to deliver excellent consistency and accuracy in Fusion Engine and F2 systems. Kythera offers the same performance in a fully mechanical, waterproof package with a realistic trigger. Kythera does not require the trigger to be released before the nozzle chambers the next shot and refills the internal air chamber for the next cycle. This happens automatically and consistently with every shot. The nozzle’s movement is not tied to the trigger pull; its dwell time in the forward position and return speed to the rear can be adjusted independently.\u003c\/p\u003e\n\u003cp\u003eBecause the system resets and recharges immediately after firing, it is ready to shoot again before the trigger is released from the previous shot. This makes double-feeding extremely unlikely.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/10\/IMG_2700_c979c70d-7c2b-465e-9423-434c48ca9970.webp\"\u003e\u003cimg class=\"aligncenter wp-image-646340 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_2700_c979c70d-7c2b-465e-9423-434c48ca9970-1024x427.webp\" alt=\"\" width=\"1024\" height=\"427\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eExceptional Efficiency and Consistency\u003c\/h2\u003e\n\u003cp\u003eThe Kythera valve design operates without the need to control the opening or closing of the valve. Excluding the small pilot valve that positions the main valve, 100% of the air supplied to the system is discharged through the nozzle, meaning all the air is used to propel the BB rather than cycle the mechanism. In addition, the system operates with extreme consistency. The valve releases at the same point and with the same force on every shot, regardless of trigger pull.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/10\/IMG_2698.webp\"\u003e\u003cimg class=\"aligncenter wp-image-646341 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_2698-1024x427.webp\" alt=\"\" width=\"1024\" height=\"427\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eUniversal Charging Cord\u003c\/h2\u003e\n\u003cp\u003eThe steel cable visible at the rear of the Kythera system is connected to the internal valve charging mechanism. Under normal conditions, pressure from the regulator automatically charges the system’s valve. The charging cable is included so that if the input pressure drops too low to cock the valve, it can be manually charged using the cable. This typically only occurs if the system has been completely depressurized, dropping below its operating range. The cable is designed to be stored in an easily accessible location inside the receiver or attached to the rifle’s charging handle.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eEasy Installation\u003c\/h2\u003e\n\u003cp\u003eThe Kythera SA system installs as a single unit inside a standard gearbox shell and generally does not require modifications to the shell. No separate components need to be installed inside the gearbox, and the only original parts that must be retained are the trigger, spring guide, selector, and safety components.\u003c\/p\u003e\n\u003ch2\u003eWide Velocity and Power Adjustment Range\u003c\/h2\u003e\n\u003cp\u003eKythera operates within a wide pressure range of 60 psi to 180 psi, allowing fine-tuning of output power for different applications. Within this range, the rifle can be set to shoot 82–152 m\/s with a 6.05x380 mm barrel and 0.20 g BBs. This allows a single Kythera to be used in any role, from CQB to sniper, by adjusting the air rig’s input pressure.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSemi-automatic\u003c\/li\u003e\n\u003cli\u003eDesigned from the ground up as a mechanical HPA system, not based on a solenoid-driven design\u003c\/li\u003e\n\u003cli\u003ePatented delayed valve mechanism provides excellent efficiency and consistent velocity combined with realistic trigger pull and reset\u003c\/li\u003e\n\u003cli\u003eComplete firing cycle\u003c\/li\u003e\n\u003cli\u003eAdjustable trigger (weight, travel, and overtravel)\u003c\/li\u003e\n\u003cli\u003eAdjustable nozzle dwell\/return speed\u003c\/li\u003e\n\u003cli\u003eWide operating pressure range: 60–180 psi\u003c\/li\u003e\n\u003cli\u003e6 mm macro line – Note: fitting sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: In addition to the air system, you will need a suitable air tank, regulator, air hose, and required fittings.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=fPXLkgTDpGM\u0026amp;embeds_referring_euri=https%3A%2F%2Fpolarstarairsoft.com%2F\u0026amp;source_ve_path=MjM4NTE\u0026amp;feature=emb_title\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=v9aas6uByxs\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?time_continue=1\u0026amp;v=Segay-rs7HY\u0026amp;embeds_referring_euri=https%3A%2F%2Fpolarstarairsoft.com%2F\u0026amp;source_ve_path=MjM4NTE\u0026amp;feature=emb_title\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=qjsU8_E6pF0\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=tb56MC-9QWo\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=pw7rKLoH0g4\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=t_tsMY592N4\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=8sRRtQKI2HU\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=kvlI5Ns1HyU\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237950837084,"sku":"10001002","price":339.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_2698_adae80cf-a300-4bbd-8206-e8a203c65758.webp?v=1743390866"},{"product_id":"polarstar-f2-v2-m4-hpa-paineilmakoneisto","title":"Polarstar F2 V2 M4 HPA compressed air system","description":"\u003cp\u003eThe PolarStar F2 combines the extreme performance of the PolarStar Fusion Engine with a compact and universally compatible design. The F2’s key feature is its dual solenoid system, inherited from the Fusion Engine, which allows independent adjustment of the valve and nozzle movement. This provides unprecedented control over both the loading time and air volume. It also enables complete customization of firing modes and solenoid movements, allowing the F2 to operate in either closed-bolt or open-bolt configuration.\u003c\/p\u003e\n\u003cp\u003eThe F2™ is built around a lightweight poppet valve design, similar in principle to the Fusion Engine™ poppet. This lightweight valve operates at lower pressures and consumes less air, improving air efficiency compared to the Fusion Engine.\u003c\/p\u003e\n\u003cp\u003eThe well-thought-out design supports a wide operating pressure range from 45 psi to 145 psi. This broad range allows the F2 to achieve both low and high muzzle velocities, making it suitable for airsoft guns intended for close-quarters combat or long-range precision builds.\u003c\/p\u003e\n\u003cp\u003eThe F2’s nozzle return mechanism is spring-driven, providing consistent loading force regardless of operating pressure. The F2 is compatible with Fusion Engine nozzle springs.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_11671_dbcc229f30ee16f172c8081baefe7019_1-1.jpg\"\u003e\u003cimg class=\"aligncenter wp-image-646351 size-full\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_11671_dbcc229f30ee16f172c8081baefe7019_1-1.jpg\" alt=\"\" width=\"800\" height=\"600\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMuzzle Velocity: 145 psi with 363 mm barrel and 0.20 g BB – 146 m\/s\n\u003cul\u003e\n\u003cli\u003eThe F2™ allows easy adjustment of muzzle velocity simply by changing the input pressure on the regulator, without requiring different nozzles. In a standard M4 rifle, for example, it can achieve 85–146 m\/s (280–480 FPS) with 0.20 g BBs. Velocity may vary depending on the model, as longer barrels increase maximum speed while shorter barrels reduce it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRate of Fire: 30 rounds per second (30 RPS)\n\u003cul\u003e\n\u003cli\u003eThe maximum rate of fire of the F2™ depends on several factors, such as operating pressure and BB quality. 30 rounds per second is achievable in most standard configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAir Efficiency: 1000+ shots with a 13\/3000 tank @ 1.5 J using 0.28 g BBs\n\u003cul\u003e\n\u003cli\u003eThe standard F2™ valve corresponds to the Fusion Engine™ Red Low-Flow valve. However, this valve responds faster and requires less air to operate, allowing the F2™ to achieve greater air efficiency than a finely tuned Fusion Engine™. (Test configuration: Red valve \/ 6.05x375 mm barrel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF2 HPA unit\u003c\/li\u003e\n\u003cli\u003e6 mm macro line (HPA hose fitting sold separately!)\u003c\/li\u003e\n\u003cli\u003eWire harness\u003c\/li\u003e\n\u003cli\u003eFCU\u003c\/li\u003e\n\u003cli\u003eTrigger board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: In addition to the unit, you will need a 7.4V battery with JST connector, a regulator, a hose, and a fitting between the hose and the unit.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237950902620,"sku":"10000258","price":539.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_11672_f239f1367a76214819bb77691dfeec24_1.jpg?v=1743390878"},{"product_id":"polarstar-f2-v3-ak-hpa-paineilmakoneisto","title":"Polarstar F2 V3 AK HPA compressed air system","description":"\u003cp\u003eThe PolarStar F2 combines the extreme performance of the PolarStar Fusion Engine with a compact and universally compatible design. The F2’s key feature is its dual solenoid system, inherited from the Fusion Engine, which allows independent adjustment of the valve and nozzle movement. This provides unprecedented control over both the loading time and air volume. It also enables complete customization of firing modes and solenoid movements, allowing the F2 to operate in either closed-bolt or open-bolt configuration.\u003c\/p\u003e\n\u003cp\u003eThe F2™ is built around a lightweight poppet valve design, similar in principle to the Fusion Engine™ poppet. This lightweight valve operates at lower pressures and consumes less air, improving air efficiency compared to the Fusion Engine.\u003c\/p\u003e\n\u003cp\u003eThe well-thought-out design supports a wide operating pressure range from 45 psi to 145 psi. This broad range allows the F2 to achieve both low and high muzzle velocities, making it suitable for airsoft guns intended for close-quarters combat or long-range precision builds.\u003c\/p\u003e\n\u003cp\u003eThe F2’s nozzle return mechanism is spring-driven, providing consistent loading force regardless of operating pressure. The F2 is compatible with Fusion Engine nozzle springs.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_11671_dbcc229f30ee16f172c8081baefe7019_1-1.jpg\"\u003e\u003cimg class=\"aligncenter wp-image-646351 size-full\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_11671_dbcc229f30ee16f172c8081baefe7019_1-1.jpg\" alt=\"\" width=\"800\" height=\"600\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMuzzle Velocity: 145 psi with 363 mm barrel and 0.20 g BB – 146 m\/s\n\u003cul\u003e\n\u003cli\u003eThe F2™ allows easy adjustment of muzzle velocity simply by changing the input pressure at the regulator, without requiring different nozzles. In a standard M4 rifle, for example, it can achieve 85–146 m\/s (280–480 fps) with 0.20 g BBs. Velocity may vary depending on the model, as longer barrels increase maximum speed while shorter barrels reduce it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRate of Fire: 30 rounds per second (30 RPS)\n\u003cul\u003e\n\u003cli\u003eThe maximum rate of fire of the F2™ depends on several factors, such as operating pressure and BB quality. 30 rounds per second is achievable in most standard configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAir Efficiency: 1000+ shots with a 13\/3000 tank @ 1.5 J using 0.28 g BBs\n\u003cul\u003e\n\u003cli\u003eThe standard F2™ valve corresponds to the Fusion Engine™ Red Low-Flow valve. However, this valve responds faster and requires less air to operate, allowing the F2™ to achieve greater air efficiency than a finely tuned Fusion Engine™. (Test configuration: Red valve \/ 6.05x375 mm barrel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF2 HPA unit\u003c\/li\u003e\n\u003cli\u003e6 mm macro line (HPA hose fitting sold separately!)\u003c\/li\u003e\n\u003cli\u003eWire harness\u003c\/li\u003e\n\u003cli\u003eFCU\u003c\/li\u003e\n\u003cli\u003eTrigger board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: In addition to the unit, you will need a 7.4V battery with JST connector, a regulator, a hose, and a fitting between the hose and the unit.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237951230300,"sku":"10000569","price":539.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_11672_f239f1367a76214819bb77691dfeec24_1_9c0937d2-f1b2-45c7-a540-b16671d918f2.jpg?v=1743390889"},{"product_id":"polarstar-jack-v2-m4-hpa-paineilmakoneisto","title":"Polarstar Jack V2 M4 HPA compressed air system","description":"\u003cp\u003eThe Polarstar JACK is designed to meet the demand for an affordable, high-performance AEG HPA conversion kit. The system installs in place of the cylinder inside the gearbox and is compatible with most AEG gearboxes where the nozzle centerline aligns with the cylinder centerline.\u003c\/p\u003e\n\u003cp\u003eThe JACK™ completely replaces the original gearbox components with a programmable, pneumatically driven, electronically controlled system, providing better performance and greater reliability compared to a traditional electric gearbox.\u003c\/p\u003e\n\u003cp\u003eThe JACK HPA unit has only one moving part—the nozzle—which acts as its own “poppet” valve. Similar to the Fusion Engine™ and F2™ poppets, the nozzle is controlled solely by a solenoid that opens the airflow through the poppet, directing air into the barrel. This design allows the JACK™ to deliver greater airflow to the barrel than competing systems that use the solenoid only as a firing valve.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVelocity: 152 m\/s with 0.20 g BB @ 130 psi\n\u003cul\u003e\n\u003cli\u003eThe JACK™ allows easy adjustment of muzzle velocity by changing the input pressure at the regulator. Jack does not require different nozzles to achieve its full power range. Using a standard M4 rifle as an example, velocity can be adjusted from under 85 m\/s up to about 150 m\/s with a 0.20 g BB. Actual velocity may vary by model, as longer barrels increase maximum speed while shorter barrels reduce it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRate of Fire: 30 rounds per second\n\u003cul\u003e\n\u003cli\u003eThe maximum cycle rate of the JACK™ depends on several factors, such as operating pressure and the quality of magazines and BBs used. However, 30 rounds per second is achievable in most common configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAir Efficiency: Over 1000 shots from a 13\/3000 tank @ 1.5 J with 0.28 g BB\n\u003cul\u003e\n\u003cli\u003eAlthough air efficiency was not a critical requirement during development, the JACK™ still delivers impressive numbers in this category. This is thanks to its smart design, which minimizes dead volume and results in better airflow, faster response, and less air per shot. (Test configuration: 6.05x375 mm barrel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJACK HPA unit\u003c\/li\u003e\n\u003cli\u003e6 mm macro line (HPA hose connector sold separately!)\u003c\/li\u003e\n\u003cli\u003eWire harness\u003c\/li\u003e\n\u003cli\u003eFCU\u003c\/li\u003e\n\u003cli\u003eTrigger board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote: In addition to the unit, you will need a 7.4V battery with JST connector, a regulator, a hose, and a connector between the hose and the unit.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=d9IJKNDpIuM\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=4xM5MFbF75I\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237951525212,"sku":"10000395","price":429.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_11681_a03ec2d55c6adf2bf6936baa76da236d_1.jpg?v=1743390902"},{"product_id":"polarstar-jack-v3-ak-hpa-paineilmakoneisto","title":"Polarstar Jack V3 AK HPA compressed air system","description":"\u003cp\u003eThe Polarstar JACK is designed to meet the demand for an affordable, high-performance AEG HPA conversion kit. The system installs in place of the cylinder inside the gearbox and is compatible with most AEG gearboxes where the nozzle centerline aligns with the cylinder centerline.\u003c\/p\u003e\n\u003cp\u003eThe JACK™ completely replaces the original gearbox components with a programmable, pneumatically operated, electronically controlled system, providing better performance and greater reliability compared to a traditional electric gearbox.\u003c\/p\u003e\n\u003cp\u003eThe JACK HPA unit has only one moving part—the nozzle—which acts as its own “poppet” valve. Similar to the poppets in the Fusion Engine™ and F2™, the nozzle is controlled solely by a solenoid that opens the airflow through the poppet, directing air into the barrel through the solenoid. This design allows the JACK™ to deliver greater airflow to the barrel than competing systems that use the solenoid only as a firing valve.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVelocity: 152 m\/s with 0.20 g BB @ 130 psi\n\u003cul\u003e\n\u003cli\u003eThe JACK™ allows easy adjustment of muzzle velocity by changing the input pressure from the regulator. Jack does not require different nozzles to achieve its full power range. Using a standard M4 rifle as an example, velocity can be adjusted from under 85 m\/s up to about 150 m\/s with a 0.20 g BB. Actual velocity may vary by model, as longer barrels increase maximum speed while shorter barrels reduce it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRate of Fire: 30 rounds per second\n\u003cul\u003e\n\u003cli\u003eThe maximum cycle rate of the JACK™ depends on several factors, such as operating pressure and the quality of magazines and BBs used. However, 30 rounds per second is achievable in most common configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAir Efficiency: Over 1000 shots from a 13\/3000 tank @ 1.5 J with 0.28 g BB\n\u003cul\u003e\n\u003cli\u003eAlthough air efficiency was not a critical requirement during development, the JACK™ still delivers impressive numbers in this category. This is thanks to its smart design, which minimizes dead volume and results in better airflow, faster response, and less air per shot. (Test configuration: 6.05x375 mm barrel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJACK HPA unit\u003c\/li\u003e\n\u003cli\u003e6 mm macro line (HPA hose connector sold separately!)\u003c\/li\u003e\n\u003cli\u003eWire harness\u003c\/li\u003e\n\u003cli\u003eFCU\u003c\/li\u003e\n\u003cli\u003eTrigger board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote: In addition to the unit, you will need a 7.4V battery with JST connector, a regulator, a hose, and a connector between the hose and the unit.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=d9IJKNDpIuM\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=4xM5MFbF75I\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237952049500,"sku":"10000745","price":429.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_11681_a03ec2d55c6adf2bf6936baa76da236d_1_0ca58970-e99f-4db1-baa1-2b681839a309.jpg?v=1743390915"},{"product_id":"polarstar-fusion-engine-hpa-koneisto-v2-gen-3-m4-m16-drop-in-kit","title":"Polarstar Fusion Engine HPA mechanism, V2 GEN 3, M4\/M16 drop-in kit","description":"\u003cp\u003eThe PolarStar Fusion Engine™ was released in 2011 as the first new HPA system to enter the airsoft market in over two decades. This is the system that started the HPA revolution in airsoft and set the benchmark against which all other systems are compared. While many have followed, the Fusion Engine™ is still recognized by most dedicated airsoft techs as the best HPA engine available. This system won the title of “Best HPA Engine” in the very first year Popular Airsoft introduced the HPA category to the Player’s Choice Awards.\u003c\/p\u003e\n\u003cp\u003eThe Fusion Engine is a complete pneumatic system that replaces the entire AEG gearbox with a fully CNC-machined lightweight aluminum chassis. The Fusion Engine offers the best tuning capabilities on the market, providing the widest range of adjustments for air flow into the system, rate of fire, and muzzle velocity. Its dual-solenoid design allows independent control of the poppet valve, which governs airflow through the system, and the nozzle movement. Additionally, the internal airflow of the poppet valve and nozzle can be fine-tuned using different poppet valves and nozzles with various flow ports. For airsoft techs seeking top-tier performance from an HPA platform, the Fusion Engine provides the ultimate foundation for any build.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/12\/FEV2-GEN3_Description_1.webp\"\u003e\u003cimg class=\"alignnone size-large wp-image-649769\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/FEV2-GEN3_Description_1-1024x427.webp\" alt=\"\" width=\"1024\" height=\"427\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fusion Engine supports a true closed-bolt system, which means it can be used to build an extremely accurate airsoft gun. A closed-bolt setup is less dependent on the hop-up unit’s component alignment compared to an open-bolt design. The trigger feel of the Fusion Engine is highly precise, as the trigger’s microswitch is custom-fitted to the chassis, resulting in a distinct break, firm stop, and short reset.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVelocity: 550 FPS with 0.20g BBs @ 120 psi.\u003cbr\u003e\n\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAs with other HPA systems, the Fusion Engine™’s velocity can be fine-tuned by adjusting input pressure. Additionally, six different nozzles are available, each providing a different level of restriction, allowing for a wide range of velocity adjustment up or down in large increments. This gives the Fusion Engine™ the broadest velocity adjustment range of any PolarStar system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRate of Fire: 30 rounds per second or more\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe maximum cyclic rate of the Fusion Engine™ depends on several factors, such as operating pressure and the quality of the magazine and BBs used. However, 30 rounds per second is achievable in most standard configurations.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir Efficiency: Over 400 shots from a 13\/3000 tank @ 1.5J with 0.28g BBs\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThis system was primarily designed to deliver maximum performance, so air efficiency was not a critical focus during development. However, thanks to the modular design of the poppet valve, the system can be fine-tuned by using more restrictive valve closures and adjustment plates, which can more than double air efficiency when operating at typical field velocities.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan style=\"color: #666666;\"\u003e(Test configuration: Black poppet \/ Blue nozzle \/ 6.05x375 mm barrel)\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #666666;\"\u003e\u003cbr\u003e\n\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0023\/7466\/4301\/files\/Fusion_Engine_Instructions_031119.pdf?v=1556026632\"\u003e\u003cstrong\u003ePolarStar Fusion Engine User Manual\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=Cz20fmQCcTo\u0026amp;embeds_referring_euri=https%3A%2F%2Fpolarstarairsoft.com%2F\u0026amp;source_ve_path=MjM4NTE\u0026amp;feature=emb_title\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=4xM5MFbF75I\u0026amp;embeds_referring_euri=https%3A%2F%2Fpolarstarairsoft.com%2F\u0026amp;source_ve_path=MjM4NTE\u0026amp;feature=emb_title\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=5rrpN1OcD64\u0026amp;embeds_referring_euri=https%3A%2F%2Fpolarstarairsoft.com%2F\u0026amp;source_ve_path=MjM4NTE\u0026amp;feature=emb_title\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237991240028,"sku":"10000434","price":649.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_7359_2332a279c7a355bab34227f914d73238_1.png?v=1743391676"},{"product_id":"gate-pulsar-d-dual-solenoid-hpa-titan-ii-bluetoothexpert-v2-johdotus-taakse","title":"GATE PULSAR D Dual Solenoid HPA + TITAN II BluetoothExpert V2 (rear wiring)","description":"\u003cp\u003eExperience a new era of airsoft with the GATE Pulsar D+ Engine Set with TITAN II Bluetooth Expert. This high-end drop-in HPA unit is designed to enhance your airsoft gun’s performance and customization options.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTITAN II Bluetooth electronic unit with Expert firmware\u003c\/strong\u003e: Control and adjust your settings wirelessly via the GATE Control Station app, compatible with both Android and iOS devices.\u003c\/li\u003e\n\u003cli\u003ePulsar D+ delivers an ultra-fast trigger response and outstanding accuracy, making it the perfect choice for both competitive and recreational use.\u003c\/li\u003e\n\u003cli\u003eInnovative automatic nozzle movement synchronization allows easier calibration – no need to fire thousands of shots to achieve optimal FPS and stable BB trajectories.\u003c\/li\u003e\n\u003cli\u003eThanks to the innovative BB feeding system and “closed bolt” mode, PULSAR D’s performance is far less sensitive to gun and build quality – PULSAR D always works!\u003c\/li\u003e\n\u003cli\u003eHigh tolerances eliminate the “mid-cap syndrome” caused by poor sealing with fully loaded magazines\u003c\/li\u003e\n\u003cli\u003eCompatible with all AEG nozzles\u003c\/li\u003e\n\u003cli\u003eStable nozzle with no wobble, resulting in consistent FPS\u003c\/li\u003e\n\u003cli\u003eNo FPS drop in AUTO mode compared to SEMI, even at extremely high rates of fire. Velocity remains stable even at 40 RPS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your gun to the next level and dominate the field with the GATE Pulsar D+ Engine Set with TITAN II Bluetooth Expert. Order yours now from Atom Airsoft and experience unprecedented performance and customization!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePULSAR D FEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSIMPLE\u003c\/strong\u003e – Easy to maintain thanks to a well-designed structure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGREAT VALUE\u003c\/strong\u003e – Cutting-edge technology at the best price\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOMPACT\u003c\/strong\u003e – The smallest closed-bolt HPA unit with dual solenoid valve and innovative cycle synchronization\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth® ETU\/FCU CONTROLLED\u003c\/strong\u003e – TITAN II Bluetooth® V2 gearbox drop-in ETU FCU MOSFET AEG HPA – the first Bluetooth optical unit in an HPA replica\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-high resolution trigger sensor\u003c\/strong\u003e – up to 50 sensitivity points within the first millimeter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth® 5.2\u003c\/strong\u003e – connectivity with other GATE ecosystem elements such as STATUS, smartwatch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfigurable fire modes in HPA replicas for the first time\u003c\/strong\u003e such as BINARY TRIGGER, BURST, etc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvenient GCS app\u003c\/strong\u003e for iOS, Android, macOS, Windows, watchOS, Wear OS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContinuous access to firmware updates\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAEG COMPATIBILITY\u003c\/strong\u003e – Compatible with AEG nozzles: 5 nozzle lengths included for MP5, M4\/M16:\n\u003cul\u003e\n\u003cli\u003e20.50 mm\u003c\/li\u003e\n\u003cli\u003e20.80 mm\u003c\/li\u003e\n\u003cli\u003e21.15 mm\u003c\/li\u003e\n\u003cli\u003e21.25 mm\u003c\/li\u003e\n\u003cli\u003e21.40 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNO MID-CAP SYNDROME\u003c\/strong\u003e – Eliminated mid-cap syndrome thanks to high dimensional tolerances\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eACCESSORIES\u003c\/strong\u003e – Use the multifunction port to connect accessories such as bolt catch, magazine sensor, tracer to hop-up chamber, electric magazine power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=NDxM_MxTaA4\u0026amp;list=TLGGRsSJnaVjRUIxMzA3MjAyNA\u003c\/p\u003e\n\u003cdiv style=\"width: 1920px;\" class=\"wp-video\"\u003e\n\u003c!--\u003cif lt IE 9\u003e\u003e\u003cscript\u003edocument.createElement('video');\u003c\/script\u003e\u003c!\u003cendif\u003e--\u003e\u003cbr\u003e\n\u003cvideo class=\"wp-video-shortcode\" id=\"video-0-1\" width=\"1920\" height=\"1080\" preload=\"metadata\" controls=\"controls\"\u003e\u003csource type=\"video\/mp4\" src=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2024\/07\/62c1b635c3b44dfa9071810fe806b437.HD-1080p-7.2Mbps-19126714.mp4?_=1\"\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2024\/07\/62c1b635c3b44dfa9071810fe806b437.HD-1080p-7.2Mbps-19126714.mp4\"\u003ehttps:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2024\/07\/62c1b635c3b44dfa9071810fe806b437.HD-1080p-7.2Mbps-19126714.mp4\u003c\/a\u003e\u003c\/video\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"width: 1920px;\" class=\"wp-video\"\u003e\u003cvideo class=\"wp-video-shortcode\" id=\"video-0-2\" width=\"1920\" height=\"1080\" preload=\"metadata\" controls=\"controls\"\u003e\u003csource type=\"video\/mp4\" src=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2024\/07\/a120b3c5c9bd40dc98441c7d5fecc7fc.HD-1080p-7.2Mbps-19137214.mp4?_=2\"\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2024\/07\/a120b3c5c9bd40dc98441c7d5fecc7fc.HD-1080p-7.2Mbps-19137214.mp4\"\u003ehttps:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2024\/07\/a120b3c5c9bd40dc98441c7d5fecc7fc.HD-1080p-7.2Mbps-19137214.mp4\u003c\/a\u003e\u003c\/video\u003e\u003c\/div\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54238210720092,"sku":"GATE-HPA-D2-R","price":609.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/PULSAR-D-titan_240201-1317.webp?v=1743394507"},{"product_id":"polarstar-f2-m249-hpa-paineilmakoneisto","title":"Polarstar F2 M249 HPA compressed air mechanism","description":"\u003cp\u003eThe PolarStar F2 combines the extreme performance of the PolarStar Fusion Engine with a compact and universally compatible design. The F2’s key feature is its dual solenoid system, inherited from the Fusion Engine, which allows independent adjustment of the valve and nozzle movement. This provides unprecedented control over both the loading time and air volume. It also enables complete customization of firing modes and solenoid movements, allowing the F2 to operate in either closed-bolt or open-bolt configuration.\u003c\/p\u003e\n\u003cp\u003eThe F2™ is built around a lightweight poppet valve design, similar in principle to the Fusion Engine™ poppet. This lightweight valve operates at lower pressures and consumes less air, improving air efficiency compared to the Fusion Engine.\u003c\/p\u003e\n\u003cp\u003eThe well-thought-out design supports a wide operating pressure range from 45 psi to 145 psi. This broad range allows the F2 to achieve both low and high muzzle velocities, making it suitable for airsoft guns intended for close-quarters combat as well as long-range precision builds.\u003c\/p\u003e\n\u003cp\u003eThe F2’s nozzle return mechanism is spring-driven, providing consistent loading force regardless of operating pressure. The F2 is compatible with Fusion Engine nozzle springs.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_11671_dbcc229f30ee16f172c8081baefe7019_1-1.jpg\"\u003e\u003cimg class=\"aligncenter wp-image-646351 size-full\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_11671_dbcc229f30ee16f172c8081baefe7019_1-1.jpg\" alt=\"\" width=\"800\" height=\"600\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMuzzle Velocity: 145 psi with 363 mm barrel and 0.20 g BB – 146 m\/s\n\u003cul\u003e\n\u003cli\u003eThe F2™ allows easy adjustment of muzzle velocity simply by changing the input pressure on the regulator, without requiring different nozzles. In a standard M4 rifle, for example, it can achieve 85–146 m\/s (280–480 FPS) with 0.20 g BBs. Velocity may vary depending on the model, as longer barrels increase maximum speed while shorter barrels reduce it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRate of Fire: 30 rounds per second (30 RPS)\n\u003cul\u003e\n\u003cli\u003eThe maximum rate of fire of the F2™ depends on several factors, such as operating pressure and BB quality. 30 rounds per second is achievable in most standard configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAir Efficiency: 1000+ shots with a 13\/3000 tank @ 1.5 J using 0.28 g BBs\n\u003cul\u003e\n\u003cli\u003eThe standard F2™ valve corresponds to the Fusion Engine™ Red Low-Flow valve. However, this valve responds faster and requires less air to operate, allowing the F2™ to achieve greater air efficiency than a finely tuned Fusion Engine™. (Test configuration: Red valve \/ 6.05x375 mm barrel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF2 HPA unit\u003c\/li\u003e\n\u003cli\u003e6 mm macro line (HPA hose fitting sold separately!)\u003c\/li\u003e\n\u003cli\u003eWire harness\u003c\/li\u003e\n\u003cli\u003eFCU\u003c\/li\u003e\n\u003cli\u003eTrigger board with magazine connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: In addition to the unit, you will need a 7.4V battery with JST connector, a regulator, a hose, and a fitting between the hose and the unit.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54238296899932,"sku":"10000574","price":539.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_11672_f239f1367a76214819bb77691dfeec24_1_38bbbaca-0caa-4b33-b204-c1fb61fbcb79.jpg?v=1743396847"},{"product_id":"polarstar-kythera-sa-v2-5-jg-ak-sr-25-puoliautomaattinen","title":"Polarstar Kythera SA V2.5 JG\/A\u0026K SR-25 (semi-automatic)","description":"\u003cp\u003e The Polarstar Kythera HPA system represents a completely new direction compared to all previous systems produced by PolarStar, as the Kythera does not use batteries, FCU or any electronics. The Kythera is completely mechanical. This means that with the Kythera you do not have to worry about charging batteries or handling sensitive electronic components. It also means that the system is completely waterproof. The Kythera is designed very intelligently and its functions have been implemented in a very small amount of components.\u003c\/p\u003e\n\n\u003ch2\u003e Realistic trigger\u003c\/h2\u003e\n\n \u003cp\u003eThe Kythera system has been designed from the ground up to achieve a realistic trigger feel. The trigger mechanism is designed to mimic the action, weight and feel of a real single-action firearm trigger. It feels real because it is real. Hardened alloy steel joints engage a stainless steel valve and when the trigger is pulled, the mechanical parts fire it in the same way that a real firearm's hammer locking detent releases the hammer. This gives the Kythera trigger a distinct front pull and threshold. The Kythera SA trigger mechanism also features a fine-tuning feature that allows you to adjust the weight and travel of the trigger pull. The trigger mechanism is spring-loaded, so the trigger is not affected by the pressure applied to the regulator.\u003c\/p\u003e\n\n\u003cp\u003e \u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/10\/IMG_2701.webp\"\u003e\u003cimg class=\"aligncenter wp-image-646339 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_2701-1024x427.webp\" alt=\"\" width=\"1024\" height=\"427\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003ch2\u003e Complete trigger cycle\u003c\/h2\u003e\n\n \u003cp\u003eThe Kythera SA design allows for a complete firing cycle with every trigger pull. This provides the closed bolt performance that has been proven to be highly effective and provide excellent accuracy in the Fusion Engine and F2 systems. The Kythera offers the same performance in a fully mechanical and waterproof package with a realistic trigger. The Kythera does not require the trigger to be released before the nozzle loads the next shot and fills the internal pressure chamber with air for the next shot. This occurs automatically and smoothly with each shot. The nozzle's trajectory is not tied to the trigger pull, but its dwell time in the forward position and its return speed to the rear position can be adjusted separately.\u003c\/p\u003e\n\n\u003cp\u003e Because the system resets and reloads immediately after a shot, it is ready to fire again before the trigger is released from the previous shot, making a double feed error extremely unlikely.\u003c\/p\u003e\n\n \u003cp\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/10\/IMG_2700_c979c70d-7c2b-465e-9423-434c48ca9970.webp\"\u003e\u003cimg class=\"aligncenter wp-image-646340 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_2700_c979c70d-7c2b-465e-9423-434c48ca9970-1024x427.webp\" alt=\"\" width=\"1024\" height=\"427\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003e Extremely good efficiency and smooth operation\u003c\/h2\u003e\n\n\u003cp\u003e The design of the Kythera valve works in such a way that there is no need to control the opening or closing of the valve. If the pilot valve that controls the position of the larger valve is not lowered, 100% of the air supplied to the system is shot out through the nozzle, which means that the air supplied to the mechanism is used effectively to fire the bullet and not to rotate the mechanism of the mechanism. In addition, the operation of the system is extremely smooth. The valve of the mechanism is released with each shot at the same point and with the same force, regardless of the pull of the trigger.\u003c\/p\u003e\n\n\u003cp\u003e \u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/10\/IMG_2698.webp\"\u003e\u003cimg class=\"aligncenter wp-image-646341 size-large\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_2698-1024x427.webp\" alt=\"\" width=\"1024\" height=\"427\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003e Universal Charging Cord\u003c\/h2\u003e\n\n \u003cp\u003eThe steel wire visible at the back of the Kythera system is attached to the internal valve charging mechanism. In normal mode, the pressure from the regulator automatically charges the mechanism valve. The charging wire is located in the mechanism so that if the pressure supplied to the Kythera drops too low and the pressure does not actuate the valve, the valve can be mechanically actuated using the wire. This usually only happens if the system has been used completely without pressure, in which case the pressure drops below the operating range of the system. The wire is designed to be placed in an easily accessible location inside the gun body or alternatively it can be attached to the gun's charging handle.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003ch2\u003e Easy installation\u003c\/h2\u003e\n\n \u003cp\u003eThe Kythera SA system is installed inside a standard gear box as a single unit and generally does not require modifications to the gear box housing. No separate parts need to be installed inside the gear box and the only parts that need to be retained from the original gear box are the trigger, spring guide, selector and safety components.\u003c\/p\u003e\n\n\u003ch2\u003e Wide output speed and power adjustment range\u003c\/h2\u003e\n\n\u003cp\u003e The Kythera has a wide operating pressure range from 60 psi to 180 psi, which allows for fine-tuning of the power developed by the system for different applications. Within this pressure range, the weapon can be set to fire a 6.05x380 mm barrel with a 0.20 g bullet at 82-152m\/s. This allows a single Kythera to be used in any role from close combat to marksmanship by adjusting the air rig supply pressure.\u003c\/p\u003e\n\n\u003ch2\u003e Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Semi-automatic\u003c\/li\u003e\n\n\u003cli\u003e Designed from the ground up as a mechanical HPA system. No solenoid-driven solution was used as the basis for the design\u003c\/li\u003e\n\n \u003cli\u003eThe patented delayed valve mechanism provides excellent efficiency and consistent muzzle velocity combined with realistic trigger pull and recoil.\u003c\/li\u003e\n\n\u003cli\u003e Complete trigger cycle\u003c\/li\u003e\n\n\u003cli\u003e Adjustable trigger (weight, pull distance and overtravel)\u003c\/li\u003e\n\n\u003cli\u003e Adjustable nozzle dwell\/return speed.\u003c\/li\u003e\n\n\u003cli\u003e Wide operating pressure range from 60 to 180 psi.\u003c\/li\u003e\n\n\u003cli\u003e 6mm macro line - NOTE! connector sold separately\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eNote! In addition to the compressed air system, you will need a suitable compressed air tank, regulator, compressed air hose and the necessary connectors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e https:\/\/www.youtube.com\/watch?v=fPXLkgTDpGM\u0026amp;embeds_referring_euri=https%3A%2F%2Fpolarstarairsoft.com%2F\u0026amp;source_ve_path=MjM4NTE\u0026amp;feature=emb_title\u003c\/p\u003e\n\n\u003cp\u003e https:\/\/www.youtube.com\/watch?v=v9aas6uByxs\u003c\/p\u003e\n\n\u003cp\u003e https:\/\/www.youtube.com\/watch?time_continue=1\u0026amp;v=Segay-rs7HY\u0026amp;embeds_referring_euri=https%3A%2F%2Fpolarstarairsoft.com%2F\u0026amp;source_ve_path=MjM4NTE\u0026amp;feature=emb_title\u003c\/p\u003e\n\n\u003cp\u003e https:\/\/www.youtube.com\/watch?v=qjsU8_E6pF0\u003c\/p\u003e\n\n\u003cp\u003e https:\/\/www.youtube.com\/watch?v=tb56MC-9QWo\u003c\/p\u003e\n\n \u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=pw7rKLoH0g4\u003c\/p\u003e\n\n\u003cp\u003e https:\/\/www.youtube.com\/watch?v=t_tsMY592N4\u003c\/p\u003e\n\n\u003cp\u003e https:\/\/www.youtube.com\/watch?v=8sRRtQKI2HU\u003c\/p\u003e\n\n\u003cp\u003e https:\/\/www.youtube.com\/watch?v=kvlI5Ns1HyU\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54238304502108,"sku":"10001003","price":359.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_2698_eea342ad-915f-4db8-8c14-12e541be739f.webp?v=1743397252"},{"product_id":"wolverine-airsoft-inferno-xts-mtw-hpa-yksikko-quake-mtw-rekyylijarjestelma","title":"Wolverine Airsoft Wolverine Airsoft INFERNO XTS MTW HPA yksikkö + QUAKE MTW rekyylijärjestelmä","description":"\u003cp\u003eWolverine QUAKE MTW -rekyylijärjestelmä tuo MTW-alustaan sen puuttuvan ulottuvuuden: rekyylin, joka tuntuu. Järjestelmä on suunniteltu toimimaan yhdessä päivitetyn INFERNO XTS -HPA-yksikön kanssa hyödyntäen sen erillistä rekyyliliitäntää. Rekyyli syntyy paineilmasta, ei sähköstä tai lisäpainoista - paine ohjataan tukkiin ja koko aseen massa välittää potkun suoraan olkapäähän ilman viivettä. Lopputuloksena MTW ei ainoastaan ammu nopeasti ja tasaisesti, vaan myös käyttäytyy laukaisussa fyysisemmin kuten oikealta aseelta odottaisi.\u003c\/p\u003e\n\u003cp\u003eINFERNO XTS perustuu samaan läpimurtohenkiseen hybriditeknologiaan, jonka GEN2 esitteli lähes kymmenen vuotta sitten, ja hyödyntää Wolverinen patentoimaa erillistä poppetti- ja suutinjärjestelmää. XTS hienosäätää aseen jokaista laukausvaihetta: \"Extended Stroke\" -rakenne parantaa hop-upin tiiveyttä, lisää syötön anteeksiantoa ja erottaa lataus- ja ampumisliikkeet toisistaan, jolloin jokainen kuula stabiloituu paremmin ja osumat toistuvat tarkempana ja hajonta saadaan pienemmäksi. Uudelleen suunniteltu venttiilirunko optimoi sisäistä ilmanvirtausta, vähentää ilmahävikkiä ja parantaa dwell-säätöjen toleranssia, mikä mahdollistaa tarkemman säädön laajemmassa määrässä kokoonpanoja.\u003c\/p\u003e\n\u003cp\u003eINFERNO XTS hyödyntää vaihdettavia virtausrajoittimia, joiden avulla rekyyli ja lähtöenergia voidaan säätää toisistaan riippumatta. Linjapaine voidaan pitää korkeana voimakkaamman rekyylin tuottamiseksi, mutta virtausrajoitin rajoittaa kuulan nopeutta niin, että ase pysyy pelialueen tehorajojen sisällä. Näin rekyylin tuntuma ei riipu suoraan sallitusta energialuokasta.\u003c\/p\u003e\n\u003cp\u003eQUAKE MTW -rekyylijärjestelmä asennetaan bufferiputken paikalle ja käyttää aseen massaa rekyylin välittämiseen tukkiin. Rekyylin voimakkuus riippuu käytetystä paineesta, eikä järjestelmä vaikuta syöttövarmuuteen. Rekyylin voi halutessaan kytkeä pois irrottamalla rekyylille menevän ilman ja sulkemalla lähdön mukana tulevalla tulpalla.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePaketinsisältö\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQUAKE MTW rekyylitukki (MTW-SA-606)\u003c\/li\u003e\n\u003cli\u003eINFERNO XTS HPA-yksikkö \u003cstrong\u003eilman solenoidia\u003c\/strong\u003e (MTW-SA-300)\u003c\/li\u003e\n\u003cli\u003eHardpoint adapter (MTW-A-604)\u003c\/li\u003e\n\u003cli\u003eMini Airline (MLT-P-032)\u003c\/li\u003e\n\u003cli\u003eRed FRAC Airline for M4 (MTW-SA-707)\u003c\/li\u003e\n\u003cli\u003eQD Sling Plate (MTW-H-605)\u003c\/li\u003e\n\u003cli\u003eCastle Nut (MTW-H-602)\u003c\/li\u003e\n\u003cli\u003eO-rengassarjat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTekniset tiedot\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKäyttöpaine (HPA-yksikkö): 60-160 PSI\u003c\/li\u003e\n\u003cli\u003eKäyttöpaine rekyylijärjestelmän kanssa: 80-150 PSI\u003c\/li\u003e\n\u003cli\u003eLähtöenergia: 0.75-2 J (kokoonpanosta riippuen)\u003c\/li\u003e\n\u003cli\u003eTulinopeus: 5-35 RPS (5-25 RPS rekyylijärjestelmän kanssa)\u003c\/li\u003e\n\u003cli\u003eLaukausmäärä 48\/3000 paineilmapullolla @ 110 PSI: noin 2000-2700 laukausta\u003c\/li\u003e\n\u003cli\u003eVirtaliitin: JST 6-8 V\u003c\/li\u003e\n\u003cli\u003eLisätiedot: \u003ca href=\"https:\/\/www.wolverineairsoft.com\/files\/documentation\/INFERNO%20XTS%20Owner%27s%20Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eWolverine Airsoft INFERNO XTS and QUAKE MTW Owner's Manuals.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eYhteensopivuus\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003ePäivityspaketti sopii suoraan Wolverine MTW Gen1, Gen2 ja Gen3 -runkoihin ilman muokkaamista tai adaptereita sekä MTW-308 erillisen adapterin kanssa. Se ei ole yhteensopiva WRAITH-tukkijärjestelmien kanssa, koska molemmat korvaavat bufferiputken. MTW Gen-12 -haulikon kanssa yhteensopivuutta ei ole tässä versiossa.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eUsein kysytyt kysymykset\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eVoiko rekyylin kytkeä pois?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKyllä. Mini airline irrotetaan ja rekyylilähtö suljetaan mukana tulevalla tulpalla.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eToimiiko WRAITH-järjestelmien kanssa?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEi. QUAKE ja WRAITH käyttävät samaa bufferiputkipaikkaa.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnko solenoidi sisällytetty pakettiin?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEi. Tämä päivityspaketti sisältää INFERNO XTS -yksikön ilman solenoidia ja on suunniteltu vaihdettavaksi jo sisällä olevan INFERNO GEN2 tilalle.\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":55852413845852,"sku":"MTW-A-606-XTS-SKU","price":389.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Quake-MTW-Kit-on-Table.jpg?v=1761843624"},{"product_id":"mechlabs-xx-mod-hpa-engine-v2-black","title":"MechLabs XX-MOD HPA Engine V2 - Black","description":"\u003cp\u003eThe MechLabs XX-Mod HPA Engine is a mechanical drop-in system for converting an AEG into a precise, tunable HPA platform. Built for hobbyists and techs.\u003c\/p\u003e\n\u003cp\u003eThe XX-Mod replaces the standard gearbox with a fully mechanical unit that runs without electronics, so it stays operational in rain and wet conditions. An XYZ alignment system provides micro-adjustments inside the receiver, helping you dial in a clean air path across varied builds.\u003c\/p\u003e\n\u003cp\u003eThe XX-Mold Bolt brings adjustable nozzle control for a snug chamber fit and synchronized air cycling, improving grouping and stability across semi and full-auto. It is also cross-tech compatible with NEXXUS and ARC platforms, so existing users can benefit from the same air performance improvements. Optimizations in air use reduce consumption and smooth out burst behavior, making the setup more stable with lower-flow regulators and common tank presets.\u003c\/p\u003e\n\u003cp\u003eWith the Air Bender function, you can fine-tune the internal air-cycle rate and ROF to match your field needs and play style. This helps lower service-air demand and extends playable time without sacrificing consistency. As with any mechanical adjustment, pushing extremes can lead to irregular cycling, so make small, incremental changes to find the balance between responsiveness and stability.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrop-in conversion from AEG gearbox to a mechanical HPA system\u003c\/li\u003e\n\u003cli\u003eModular block design for quick configuration changes\u003c\/li\u003e\n\u003cli\u003ePrecision lock-fit interface for consistent alignment\u003c\/li\u003e\n\u003cli\u003eXYZ alignment system with micro-adjustments for clean air pathing\u003c\/li\u003e\n\u003cli\u003eFully mechanical operation for reliable, waterproof use\u003c\/li\u003e\n\u003cli\u003eMagnetic return trigger with adjustable travel and sensitivity\u003c\/li\u003e\n\u003cli\u003eAdjustable nozzle via XX-Mold Bolt for improved chamber fit\u003c\/li\u003e\n\u003cli\u003eAir Bender control for ROF and cycle tuning\u003c\/li\u003e\n\u003cli\u003eReduced air consumption and stabilized output for longer play\u003c\/li\u003e\n\u003cli\u003eCompatible with NEXXUS and ARC via the XX-Mold Bolt\u003c\/li\u003e\n\u003cli\u003eWorks well with lower-flow regulators and common tank presets\u003c\/li\u003e\n\u003cli\u003eSupports dual-air supply setups with Flo MAX TS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Airflow Systems SLU","offers":[{"title":"Default Title","offer_id":57266052497756,"sku":"103827","price":469.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/IMG_1529_1500x1500_e20aaa47-6c51-46a9-a768-4c721c9f5d4c.webp?v=1775335314"},{"product_id":"wolverine-airsoft-inferno-xts-mtw-hpa-upgrade-kit","title":"Wolverine Airsoft INFERNO XTS HPA Engine for MTW, Upgrade Kit","description":"\u003cp\u003eThe Wolverine Airsoft INFERNO XTS HPA Engine for MTW Upgrade Kit is designed for MTW users who want to upgrade their existing INFERNO Gen 2 engine to Wolverine’s newer XTS platform. The kit includes the engine without a solenoid, allowing you to reuse the solenoid from your current INFERNO Gen 2 setup.\u003c\/p\u003e\n\n\u003ch2\u003eUpgrade your MTW with the INFERNO XTS\u003c\/h2\u003e\n\n\u003cp\u003eThe INFERNO XTS builds on everything that made the INFERNO Gen 2 a trusted and highly respected HPA engine. It delivers the same proven reliability and performance, but adds more forgiveness, tunability and future upgrade potential for modern MTW builds.\u003c\/p\u003e\n\n\u003cp\u003eBased on Wolverine’s patented independent poppet and nozzle system, the INFERNO XTS refines every stage of the shot cycle. Its extended stroke design improves hop-up air seal, increases feeding forgiveness and creates clearer separation between the loading and firing movements. This helps stabilize each BB before firing, resulting in tighter groupings and more consistent shots.\u003c\/p\u003e\n\n\u003cp\u003eThe newly engineered valve housing optimizes internal airflow, reduces wasted air and makes dwell tuning more forgiving across different setups. Whether you are tuning for competitive performance, adjusting the rifle to local energy limits or simply looking for a more consistent MTW, the INFERNO XTS gives you refined control and reliable performance.\u003c\/p\u003e\n\n\u003cp\u003eThe INFERNO XTS also includes a recoil output port, making it compatible with the QUAKE MTW Recoil Stock. This means the engine can be used as a future-ready upgrade if you want to add a recoil system to your MTW later.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUpgrade kit for replacing an existing INFERNO Gen 2 MTW engine\u003c\/li\u003e\n\u003cli\u003eIncludes the engine without solenoid\u003c\/li\u003e\n\u003cli\u003eUses the solenoid from your existing INFERNO Gen 2 setup\u003c\/li\u003e\n\u003cli\u003eExtended stroke independent poppet and nozzle design for improved BB loading and sealing\u003c\/li\u003e\n\u003cli\u003eImproved hop-up air seal and feeding forgiveness\u003c\/li\u003e\n\u003cli\u003eRedesigned stainless steel nozzle increases mass and adds inertia during BB loading for more consistent chambering\u003c\/li\u003e\n\u003cli\u003eOne-piece Delrin baffle reduces friction and wear while simplifying servicing\u003c\/li\u003e\n\u003cli\u003eNew valve housing optimizes internal airflow and reduces air waste\u003c\/li\u003e\n\u003cli\u003eMore forgiving dwell tuning across different builds and energy levels\u003c\/li\u003e\n\u003cli\u003eOptional flow reducers enable precise airflow control for low-energy tuning and high-pressure recoil setups\u003c\/li\u003e\n\u003cli\u003eThree levels of flow reducers included\u003c\/li\u003e\n\u003cli\u003eRecoil output port compatible with the QUAKE MTW Recoil Stock\u003c\/li\u003e\n\u003cli\u003eDirect solenoid-fired design for reliable and instantaneous firing\u003c\/li\u003e\n\u003cli\u003eDurable and easily serviceable components\u003c\/li\u003e\n\u003cli\u003eBackwards compatible with MTW M4, MTW-9 and MTW-308 builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInput pressure: 60–160 psi\u003c\/li\u003e\n\u003cli\u003eOutput energy: approx. 1–3 J, adjustable depending on build\u003c\/li\u003e\n\u003cli\u003eRate of fire: 5–35 RPS, adjustable\u003c\/li\u003e\n\u003cli\u003eBattery input: JST 6–8 V\u003c\/li\u003e\n\u003cli\u003eDwell: fully adjustable\u003c\/li\u003e\n\u003cli\u003eApprox. 3,120–4,160 shots per 48\/3000 tank at 1.5 J with a 10\" stock MTW at approx. 90 psi\u003c\/li\u003e\n\u003cli\u003eElectronics: compatible with all Wolverine Airsoft electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMTW M4: compatible\u003c\/li\u003e\n\u003cli\u003eMTW-9: compatible\u003c\/li\u003e\n\u003cli\u003eMTW-308: compatible\u003c\/li\u003e\n\u003cli\u003eMTW Shotgun: not compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This upgrade kit contains the INFERNO XTS engine without solenoid. It is intended for upgrading an existing MTW with an INFERNO Gen 2 engine, allowing the original solenoid to be reused.\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":57488235790684,"sku":"NFR-A-002","price":219.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/INFERNO-XTS-Upgrade-Kit.jpg?v=1778156705"}],"url":"https:\/\/atom-airsoft.fi\/en-lv\/collections\/hpa-engines.oembed","provider":"Atom Airsoft","version":"1.0","type":"link"}