{"title":"HPA accessories","description":"\u003cp data-start=\"166\" data-end=\"406\"\u003eHPA accessories are essential components for the efficient and safe operation of a High Pressure Air system. They allow you to tailor your setup to your specific needs, improving both the performance and user experience of your airsoft gun.\u003c\/p\u003e\n\u003cp data-start=\"408\" data-end=\"472\"\u003eOur selection includes a wide range of HPA accessories, such as:\u003c\/p\u003e\n\u003cp data-start=\"474\" data-end=\"565\"\u003e\u003cstrong data-start=\"474\" data-end=\"502\"\u003eConnectors and adapters:\u003c\/strong\u003e Ensure compatibility between different systems and components.\u003c\/p\u003e\n\u003cp data-start=\"567\" data-end=\"647\"\u003e\u003cstrong data-start=\"567\" data-end=\"593\"\u003eRegulators and valves:\u003c\/strong\u003e Control air pressure and maintain consistent airflow.\u003c\/p\u003e\n\u003cp data-start=\"649\" data-end=\"743\"\u003e\u003cstrong data-start=\"649\" data-end=\"669\"\u003eHoses and lines:\u003c\/strong\u003e Designed to withstand high pressure while offering flexible connectivity.\u003c\/p\u003e\n\u003cp data-start=\"745\" data-end=\"838\"\u003e\u003cstrong data-start=\"745\" data-end=\"770\"\u003eMaintenance supplies:\u003c\/strong\u003e Including O-rings and filters to keep your system in top condition.\u003c\/p\u003e\n\u003cp data-start=\"840\" data-end=\"941\"\u003eThe accessories are compatible with well-known HPA systems such as PolarStar, Wolverine and Mancraft.\u003c\/p\u003e\n\u003cp data-start=\"943\" data-end=\"1077\"\u003eBy upgrading your HPA setup with high-quality accessories, you ensure optimal performance and extend the lifespan of your airsoft gun.\u003c\/p\u003e","products":[{"product_id":"wolverine-airsoft-universaali-johtosarja","title":"Wolverine Airsoft Universal wiring harness","description":"\u003cp\u003eWolverine Airsoft Universal Wiring Kit for Wolverine Airsoft HPA systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJumper Board\u003c\/li\u003e\n\u003cli\u003eMicroswitch\u003c\/li\u003e\n\u003cli\u003eWire Extensions (x2)\u003c\/li\u003e\n\u003cli\u003e0.63” x 1” Shrink Tube\u003c\/li\u003e\n\u003cli\u003e1.25” x 1\/4” Clear Heat Shrink\u003c\/li\u003e\n\u003cli\u003e1\/16” Drill bit\u003c\/li\u003e\n\u003cli\u003e20×6 TX Panhead Self-Tapping Screw\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54236510421340,"sku":"MLT-E-040-SKU","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Universal-Wiring-Kit.jpg?v=1743362352"},{"product_id":"mancraft-v2-long-assembly","title":"Mancraft V2 long assembly","description":"\u003cp\u003eMancraft V2 long assembly\u003cbr\u003e\nThis product allows you to convert a standard Version 2 SDiK into a Version 2 long model, making it compatible with pneumatic systems such as the A\u0026amp;K SR25.\u003c\/p\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54236525232476,"sku":"MC0067","price":44.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mancraft-v2-long-assembly.png?v=1743363197"},{"product_id":"mancraft-pdik-tiivistesarja","title":"Mancraft PDiK Gen.1 gasket set","description":"\u003cp\u003eMancraft PDiK Seal Kit\u003c\/p\u003e\n\u003cp\u003eO-ring set for Mancraft PDiK Gen.1 HPA unit.\u003c\/p\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54236526084444,"sku":"MC0041","price":4.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mancraft-pdik-tiivistesarja-1.png?v=1743363219"},{"product_id":"wolverine-airsoft-premium-fcu-gen-2","title":"Wolverine Airsoft Premium FCU, gen 2.","description":"\u003cp\u003eWolverine Airsoft Premium FCU, Gen 2.\u003cbr\u003e\nPremium FCU for all Wolverine systems capable of full-auto fire.\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54236530049372,"sku":"MLT-E-001-SKU","price":109.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Premium-FCU-scaled-1.jpg?v=1743363250"},{"product_id":"wolverine-airsoft-mac-solenoid-venttiili-smp-inferno-hydra-koneistoille","title":"Wolverine Airsoft MAC Solenoid Valve for SMP, Inferno, \u0026 Hydra Systems","description":"\u003cp\u003e Solenoid for Wolverine Hydra, Inferno and \u003cspan class=\"caps\"\u003eSMP\u003c\/span\u003e air engines. Compatible with all generations.\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54236538077532,"sku":"MLT-P-004-SKU","price":149.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/wolverine-airsoft-mac-solenoid-valve-for-smp-inferno-hydra-systems.jpg?v=1743363342"},{"product_id":"wolverine-airsoft-v2-14-wire-harness-gen-2","title":"Wolverine Airsoft V2 (14″) Wire Harness - Gen. 2","description":"\u003cp\u003e Wolverine Airsoft V2 (14″) Wire Harness – Gen. 2\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54236659941724,"sku":"MLT-E-008-GEN2-SKU","price":32.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/wolverine-airsoft-v2-14_E2_80_B3-wire-harness-_E2_80_93-gen.-2.jpg?v=1743365390"},{"product_id":"wolverine-airsoft-versio-2-liipasinkoneisto-trigger-board-gen-3","title":"Wolverine Airsoft Version 2 trigger mechanism, trigger board - gen 3","description":"\u003cp\u003e Wolverine Airsoft version 2 trigger mechanism, trigger board - gen 3\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54236665741660,"sku":"MLTE002GEN3","price":29.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/wolverine-airsoft-versio-2-liipasinkoneisto-trigger-board-gen-3.jpg?v=1743365410"},{"product_id":"wolverine-airsoft-18-wire-harness-gen-2","title":"Wolverine Airsoft 18″ Wire Harness - Gen. 2","description":"\u003cp\u003e Wolverine Airsoft 18″ Wire Harness – Gen. 2\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54236666888540,"sku":"MLT-E-007-GEN2-SKU","price":32.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/wolverine-airsoft-18_E2_80_B3-wire-harness-_E2_80_93-gen.-2.jpg?v=1743365419"},{"product_id":"mancraft-sdik-vsr-10-45-ohjainrengas","title":"Mancraft SDiK VSR-10 45° guide ring","description":"\u003cp\u003e The Mancraft SDiK guide ring improves the movement of the unit within the cylinder with a 45 degree trigger mechanism.\u003c\/p\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54236772761948,"sku":"MC0136","price":7.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mancraft-sdik-vsr-10-45-ohjainrengas.jpg?v=1743367712"},{"product_id":"hpa-co2-pullon-o-rengas","title":"Atom Airsoft \/ CO2 cylinder o-ring","description":"\u003cp\u003e O-ring for the groove at the end of the threads of a compressed air cylinder. This seal seals a remote, regulator or other device that is attached to the cylinder threads.\u003c\/p\u003e","brand":"Atom Airsoft","offers":[{"title":"Default Title","offer_id":54236926509404,"sku":"HPAORENGAS","price":1.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/e440.jpg?v=1743370321"},{"product_id":"wolverine-airsoft-m249-johdotus","title":"Wolverine Airsoft M249 wiring harness","description":"\u003cp\u003e\"M249 wire harness\" wiring set for full-auto only, designed to connect to the original micro switch found in M249-type machine guns.\u003c\/p\u003e\n\u003cp\u003eCompatible with the following guns:\u003c\/p\u003e\n\u003cp\u003eA\u0026amp;K\/CA M249\u003cbr\u003e\nA\u0026amp;K PKM\u003cbr\u003e\nA\u0026amp;K M60 various versions\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237077504348,"sku":"MLT-E-010","price":34.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/M249WireH-1000x1000.jpg?v=1743372476"},{"product_id":"wolverine-airsoft-mtw-hop-up-yksikko","title":"Wolverine Airsoft MTW hop-up unit","description":"\u003cp\u003eRotary-style hop-up unit compatible with Wolverine MTW.\u003c\/p\u003e\n\u003cp\u003eENG: Hop-Up for MTW\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237077963100,"sku":"MTW-A-301-SKU","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/MTW-Hop-Up-scaled-1.jpg?v=1743372486"},{"product_id":"mancraft-pdik-v2-gen-2-ilmamaaran-rajoitin","title":"Mancraft PDiK V2 gen.2 air flow limiter","description":"\u003cp\u003eThe PDiK v2 gen. 2 reduction limits the amount of air fed into the barrel in the version 2 PDiK system. This allows you to reduce air consumption when using the Mancraft system with shorter barrels.\u003c\/p\u003e\n\u003cdiv id=\"primary_block\" class=\"clearfix\"\u003e\n\u003cdiv id=\"pb-right-column\"\u003e\n\u003cdiv id=\"image-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54237119185244,"sku":"MC0060.41","price":7.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/pdikv2-reduction.png?v=1743373256"},{"product_id":"wolverine-airsoft-v3-liipasinkoneisto-v3-trigger-board-gen-2","title":"Wolverine Airsoft V3 trigger mechanism, V3 trigger board - gen 2","description":"\u003cp\u003e Wolverine Airsoft version 3 trigger mechanism, trigger board - gen 2\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237141500252,"sku":"MLT-E-006-GEN2","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/V3TB-500x500.jpg?v=1743373672"},{"product_id":"wolverine-airsoft-premium-fcu-m249-versio","title":"Wolverine Airsoft Premium FCU, M249 version","description":"\u003cp\u003ePremium FCU for all Wolverine fire-selectable systems. The M249 version includes wiring for building an auto-winding box magazine.\u003c\/p\u003e\n\u003cp\u003eNote! Building an auto-winding box magazine with this FCU requires technical knowledge and additional components. If you are not familiar with electronics, please contact our service team for installation assistance.\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237142024540,"sku":"MLT-E-011-SKU","price":115.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Premium-FCU-scaled-1_e5e52c83-c78d-4790-a7e2-3b2d24b8db87.jpg?v=1743373681"},{"product_id":"wolverine-airsoft-mtw-contact-yoke-assembly","title":"Wolverine Airsoft MTW Contact Yoke Assembly","description":"\u003cp\u003e The Wolverine Airsoft MTW Contact Yoke Assembly is compatible with all different MTW versions.\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237150380380,"sku":"MTW-A-402","price":9.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/contact-yoke-for-MTW-scaled-1.jpg?v=1743373798"},{"product_id":"wolverine-airsoft-mtw-bolt-catch","title":"Wolverine Airsoft MTW Bolt Catch","description":"\u003cp\u003eThe Wolverine Airsoft MTW Bolt Catch is CNC-machined from aluminum. Includes the bolt catch, mounting pin, and spring.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBolt Catch (MTW-M-104)\u003c\/li\u003e\n\u003cli\u003eBolt Catch Pin (MTW-H-117)\u003c\/li\u003e\n\u003cli\u003eBolt Catch Spring (MTW-H-132)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237153296732,"sku":"MTW-A-104","price":34.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/bolt-catch-1.jpg?v=1743373818"},{"product_id":"wolverine-airsoft-regulaattori-painemittari-cat-5-ontank-high-pressure","title":"Wolverine Airsoft Regulator pressure gauge - Cat 5\/OnTank\/High Pressure","description":"\u003cp\u003ePressure gauge for Wolverine regulator, compatible with STORM Category 5, STORM OnTank, and STORM High Pressure.\u003c\/p\u003e\n\u003cp\u003eENG: Pressure Gauge for STORM - Cat 5\/onTank\/HighPressure\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237308125532,"sku":"STM-P-003-SKU","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Gauge-for-Storm.jpg?v=1743375839"},{"product_id":"tapp-airsoft-p226-hpa-sahkosyottoinen-rumpulipas-us-foster-liitin","title":"TAPP Airsoft P226 HPA Electric Drum Magazine - US Foster Connector","description":"\u003cp\u003eThe Tapp Airsoft electric-fed P226 HPA drum magazine is compatible with Marui \/ KJW \/ WE-compatible P226-style GBB pistols. The magazine converts your gas-powered blowback pistol into an HPA-powered setup. In addition to the magazine, you will need a low-pressure HPA regulator, hose, and air tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMarui \/ WE \/ AW Custom \/ KJW-compatible P226-style GBB pistols\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFoster (US-fitting) compatible HPA connector\u003c\/li\u003e\n\u003cli\u003eElectric feeding system, with a loading button on the bottom of the magazine\u003c\/li\u003e\n\u003cli\u003eFeed channel pre-modified to single-stack for high feeding speed\u003c\/li\u003e\n\u003cli\u003eRequires a 9V battery\u003c\/li\u003e\n\u003cli\u003eRecommended operating pressure: 90–100 psi\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TAPP Airsoft","offers":[{"title":"Default Title","offer_id":54237425860956,"sku":"7530-7533","price":134.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/p226d.jpg?v=1743377250"},{"product_id":"wolverine-mtw-syottoputki","title":"Wolverine Airsoft MTW feed tube, Gen 1","description":"\u003cp\u003e Wolverine MTW replacement feed tube for MTW Billet series manufactured before October 1, 2021 (Cuddles mascot engraved on lower frame). ENG: Feed Tube for MTW (Gen 1)\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237669327196,"sku":"MTW-A-302-SKU","price":6.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/feed-tube-mtw-500x500-1.jpg?v=1743382473"},{"product_id":"maxx-model-cnc-alumiininen-hop-up-yksikko-m4w-mtw","title":"Maxx Model CNC aluminum hop-up unit M4W - MTW","description":"\u003cp\u003eThe Maxx Model CNC aluminum hop-up unit M4W is a CNC-machined modified hop-up unit designed for Wolverine MTW (Wolverine Modular Training Weapon) airsoft rifles.\u003c\/p\u003e\n\u003cp\u003eThe Maxx Model M4W unit is precisely engineered and manufactured to work with HPA-powered MTW models. The M4W unit is compatible with Milspec, Forged, Billet, and MTW-9 MTW variants.\u003c\/p\u003e\n\u003cp\u003eThe M4W unit features an aluminum rotary-style adjustment wheel, allowing for highly precise hop-up adjustment. The package includes three different nubs, enabling optimal performance whether the hop-up bucking is a standard type, equipped with an R-hop patch, or a Maple Leaf model with an extended contact patch.\u003c\/p\u003e\n\u003cp\u003eThe M4W unit is dimensioned for optimal performance with the Wolverine MTW M4 nozzle. It is also designed to be compatible with nearly all hop-up buckings available on the market without issues.\u003c\/p\u003e\n\u003cp\u003eThe M4W unit comes with a replaceable nozzle-centering insert, ensuring the hop-up unit is perfectly aligned with the nozzle.\u003c\/p\u003e\n\u003cp\u003eThe sides of the hop-up unit feature removable brass side wings that slide smoothly into the grooves of the outer barrel.\u003c\/p\u003e","brand":"Maxx Model","offers":[{"title":"Default Title","offer_id":54237686759772,"sku":"MX-HOP020MW","price":89.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/MX-HOP020MW_01-1000x1000.jpg?v=1778150156"},{"product_id":"maxx-model-cnc-alumiinen-hop-up-kammio-m4p-pro","title":"Maxx Model CNC aluminum hop-up chamber, M4P - PRO (PolarStar)","description":"\u003cp\u003eThe Maxx Model CNC aluminum hop-up chamber, M4P - PRO, is designed and manufactured to work precisely and with extreme accuracy in M4\/M16 style airsoft guns equipped with PolarStar pneumatic systems.\u003c\/p\u003e\n\u003cp\u003eThe hop-up adjustment uses a rotary-style mechanism, controlled by a large numbered adjustment ring. The rotary hop-up design allows for highly precise and stable hop-up settings. The hop-up unit comes with different pressure arms, making it possible to optimize the unit for use with standard hop-up rubbers or R-hop patches.\u003c\/p\u003e\n\u003cp\u003eThe HM4P unit is engineered to fit seamlessly with the nozzle length of the PolarStar HPA M4 unit. The M4P unit features an interchangeable nozzle support adapter that ensures the hop-up unit remains aligned with both the barrel and the HPA unit.\u003c\/p\u003e\n\u003cp\u003eThe M4P unit is equipped with an interchangeable nozzle-centering adapter, ensuring the hop-up unit is positioned exactly in line with the nozzle.\u003c\/p\u003e\n\u003cp\u003eThe sides of the hop-up unit feature removable brass side wings that slide smoothly into the grooves of the outer barrel.\u003c\/p\u003e","brand":"Maxx Model","offers":[{"title":"Default Title","offer_id":54237686858076,"sku":"MX-HOP010MP","price":99.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/MX-HOP010MP_01-1000x1000-1.jpg?v=1743382876"},{"product_id":"taginn-hpa-tayttolaite","title":"TAGInn HPA filling device","description":"\u003cp\u003eThe Taginn HPA filling device is an adapter that allows you to fill HPA-compatible Taginn shells with compressed air directly from a paintball air tank. The filling device is compatible with Taginn \"Shell Multi-R\", \"Shell-HPA\", or any other HPA device with a similar design.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TAGInn","offers":[{"title":"Default Title","offer_id":54237773857116,"sku":"054","price":74.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/charg.jpg?v=1743384104"},{"product_id":"wolverine-spartan-electronics-control-board-mtw-billet-black-edition","title":"Wolverine Airsoft Spartan Electronics Control Board, MTW Billet - Black Edition","description":"\u003cp\u003eWolverine Spartan Electronics Control Board, MTW Billet is the original control board for the MTW Billet series. The new black version features an optical fire selector sensor with no wear-prone contact surface with the selector. This allows the fire selector to be easily removed\/installed when using the new control board.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Selector-Barrel-Sticker-Position-300x300-1.jpg\"\u003e\u003cimg class=\"alignnone size-full wp-image-640947\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Selector-Barrel-Sticker-Position-300x300-1.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237775266140,"sku":"MTW-A-404-SKU","price":114.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/New-Spartan-scaled-1.jpg?v=1743384153"},{"product_id":"wolverine-airsoft-mac-solenoidin-o-rengas-tiivistesarja","title":"Wolverine Airsoft MAC Solenoid O-Ring Seal Kit","description":"\u003cp\u003eCompatible with the following MAC solenoids:\u003c\/p\u003e\n\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cul\u003e\n\u003cli\u003eINFERNO\u003c\/li\u003e\n\u003cli\u003eHYDRA\u003c\/li\u003e\n\u003cli\u003eBOLT\u003c\/li\u003e\n\u003cli\u003eREAPER\u003c\/li\u003e\n\u003cli\u003eSMP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cform class=\"cart\" action=\"https:\/\/www.wolverineairsoft.com\/product\/o-ring-kit-for-mac-valves\/\" enctype=\"multipart\/form-data\" method=\"post\"\u003e\n\u003cdiv class=\"quantity\"\u003e\u003c\/div\u003e\n\u003c\/form\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237849354588,"sku":"MLT-A-013-SKU","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Mac-Solenoid-O-Ring-Kit.jpg?v=1776755698"},{"product_id":"wolverine-airsoft-replacement-grip-line-with-integrated-filter-paineilmaletku-sihdilla","title":"Wolverine Airsoft Replacement Grip Line with Integrated Filter, compressed air hose with filter","description":"\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUS Foster (US connector)\u003c\/li\u003e\n\u003cli\u003eINFERNO Gen 1, HYDRA Gen 1, SMP, INFERNO Gen 2, HYDRA Gen 2, REAPER\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe integrated filter inside the hose keeps debris out of your air line.\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237919347036,"sku":"MLT-P-001-SKU","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Integrated-Filtered-Line-1.jpg?v=1743388507"},{"product_id":"wolverine-hpa-pullotukki-wraith-x","title":"Wolverine Airsoft HPA bottle holder WRAITH X","description":"\u003cdiv class=\"group w-full text-token-text-primary border-b border-black\/10 dark:border-gray-900\/50 bg-gray-50 dark:bg-\u0026lt;#444654\u0026gt;\" data-testid=\"conversation-turn-17\"\u003e\n\u003cdiv class=\"flex p-4 gap-4 text-base md:gap-6 md:max-w-2xl lg:max-w-\u0026lt;38rem\u0026gt; xl:max-w-3xl md:py-6 lg:px-0 m-auto\"\u003e\n\u003cdiv class=\"relative flex w-\u0026lt;calc(100%-50px)\u0026gt; flex-col gap-1 md:gap-3 lg:w-\u0026lt;calc(100%-115px)\u0026gt;\"\u003e\n\u003cdiv class=\"flex flex-grow flex-col gap-3 max-w-full\"\u003e\n\u003cdiv class=\"min-h-\u0026lt;20px\u0026gt; flex flex-col items-start gap-3 overflow-x-auto whitespace-pre-wrap break-words\"\u003e\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\n\u003cp\u003eThe WRAITH X bottle stock fits a standard 13\/3000 CU (0.2L) or other HPA tanks with a 2-inch diameter! The stock is secured against the bottle with a tightening plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits standard 13\/3000 CU (0.2L) HPA tank\u003c\/li\u003e\n\u003cli\u003eRubber-lined clamp keeps the stock firmly in place on the bottle\u003c\/li\u003e\n\u003cli\u003eDurable polymer construction\u003c\/li\u003e\n\u003cli\u003eWeight only 6.15 oz (174 g)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eENG: HPA Tank Stock for WRAITH X\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/08\/WRAITH-X-Logo-Textured-Small-1.png\"\u003e\u003cimg class=\"alignnone size-medium wp-image-642951\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/WRAITH-X-Logo-Textured-Small-1-300x97.png\" alt=\"\" width=\"300\" height=\"97\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54237924000092,"sku":"WRT-A-011-SKU","price":59.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Wraith-X-Tank-Stock-1.jpg?v=1743389317"},{"product_id":"mancraft-pdik-v2-gen-3-ilmamaaran-rajoitin","title":"Mancraft PDiK V2 gen.3 air flow limiter","description":"\u003cp\u003eThe PDiK v2 gen. 3 reduction limits the amount of air fed into the barrel in the version 2 PDiK mechanism. This allows you to reduce the amount of air delivered to the barrel with each shot. This is particularly useful with shorter barrels or when you want to limit the replica’s muzzle velocity.\u003c\/p\u003e\n\u003cdiv id=\"primary_block\" class=\"clearfix\"\u003e\n\u003cdiv id=\"pb-right-column\"\u003e\n\u003cdiv id=\"image-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54237933470044,"sku":"MC.PDIKV2.GEN3.RED","price":7.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/pdik-v2-gen3-reduction.jpg?v=1743390095"},{"product_id":"mancraft-pdik-v3-ilmamaaran-rajoitin","title":"Mancraft PDiK V3 air flow restrictor","description":"\u003cp\u003eThe PDiK v3 reduction limits the amount of air fed into the barrel in the version 3 PDiK mechanism.\u003c\/p\u003e\n\u003cp\u003eThis allows you to reduce the amount of air delivered to the barrel with each shot. This is particularly useful with shorter barrels or when you want to limit the replica’s muzzle velocity.\u003c\/p\u003e\n\u003cdiv id=\"primary_block\" class=\"clearfix\"\u003e\n\u003cdiv id=\"pb-right-column\"\u003e\n\u003cdiv id=\"image-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54237933666652,"sku":"MC0081","price":7.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/pdik-v2-gen3-reduction_13ef6f2a-2e19-4864-b816-d43cc4236f20.jpg?v=1743390104"},{"product_id":"polarstar-mrs-gen1-gen2-micro-regulaattorin-painemittari","title":"Polarstar MRS (GEN1 \u0026 GEN2) Micro Regulator Pressure Gauge","description":"\u003cp\u003eReplacement pressure gauge for PolarStar MRS and GEN1 and GEN2 micro regulators.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating range 0-220 psi\u003c\/li\u003e\n\u003cli\u003e25 mm display\u003c\/li\u003e\n\u003cli\u003e1\/8 NPT thread\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237953818972,"sku":"10000475","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/220psi_Gauge_1920x500_635cb32e-fd50-4676-a1b2-399efca56ec7_1944x-e1698824667601.webp?v=1743390985"},{"product_id":"polarstar-wire-harness-rev-2-johtosarja-18","title":"Polarstar Wire Harness Rev. 2 - 18\"","description":"\u003cp\u003eThe PolarStar Wire Harness Rev. 2 - 18\" is made from 24 AWG wire for excellent durability and protected with a strong nylon mesh sleeve to prevent damage as the wires pass through the receiver. This wire harness is generally compatible with all PolarStar electro-pneumatic HPA systems except for the original V2 GEN1 Fusion Engine and Amoeba series.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with all PolarStar systems that use REV2 or REV3 FCU\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e18 inches is the standard length for V2 series F2, F1, and JACK versions. Also recommended for FE installations in full stock replicas (e.g., M16A3).\u003c\/li\u003e\n\u003cli\u003e13 inches is the standard length for V2 FE as well as V3 F2, F1, and JACK series.\u003c\/li\u003e\n\u003cli\u003e7.5 inches is the standard length for V3 and MG-FE series, but it is also recommended for wiring the FCU inside the pistol grip in UGS\/CGS setups.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237953950044,"sku":"10000247","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Wire_Harness_1944x-e1698824721301.webp?v=1743390995"},{"product_id":"polarstar-fcu-fire-control-unit-rev-3-universaali-elektroninen-ohjainyksikko","title":"Polarstar FCU (Fire Control Unit, Rev. 3) - universal electronic control unit","description":"\u003cp\u003eThe PolarStar REV3 FCU is equipped with an LCD screen and joystick, allowing you to easily navigate menus and fine-tune settings for perfect adjustment of your HPA gun. This FCU is compatible with all PolarStar HPA systems, including both dual-solenoid and single-solenoid configurations.\u003c\/p\u003e\n\u003cp\u003eCompared to previous versions, the REV3 model features updated voltage regulators that significantly improve energy efficiency and greatly reduce the physical size of the FCU. While the REV3 FCU is larger than the PolarStar Mini FCU, it is still compact enough to fit inside an M4 buffer tube along with a small 300 mAh LiPo battery pack.\u003c\/p\u003e\n\u003cp\u003eAnother great feature of this FCU is its integrated Motor Control Unit (MCU), which enables the use of box magazines through the MCU port.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLCD screen and joystick for easy and precise adjustments\u003c\/li\u003e\n\u003cli\u003eCompact size 57.15 mm x 22.86 mm (2.25\" x 0.9\")\u003c\/li\u003e\n\u003cli\u003eIntegrated Motor Control Unit (MCU)\u003c\/li\u003e\n\u003cli\u003eCompatible with both dual-solenoid and single-solenoid HPA systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237953982812,"sku":"10000256","price":94.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/10000256_1944x-e1698824918852.webp?v=1743391004"},{"product_id":"polarstar-universal-plugboard-liitinlevy","title":"Polarstar Universal Plugboard","description":"\u003cp\u003eThe Polarstar Universal Plugboard connector board is designed for use in all MG and LMG style airsoft guns, such as the M249. The plugboard is compatible with all PolarStar HPA units, including the Fusion Engine. It can also be used with custom wiring setups when a model-specific circuit board is not available.\u003c\/p\u003e\n\u003cp\u003eThe connector board features four 2-pin connector slots and one 5-pin connector. The 5-pin connector is intended for the main wiring. The 2-pin connectors are labeled as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCON1 = Nozzle solenoid\u003c\/li\u003e\n\u003cli\u003eCON2 = Poppet solenoid\u003c\/li\u003e\n\u003cli\u003eCON3 = Selector input\u003c\/li\u003e\n\u003cli\u003eCON4 = Trigger input\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237954081116,"sku":"10000207","price":24.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/10000207_1944x-e1698826234383.webp?v=1743391013"},{"product_id":"polarstar-switchboard-v2-liipasinkoneisto","title":"Polarstar Switchboard, V2 trigger mechanism","description":"\u003cp\u003eThe Polarstar Switchboard V2 wiring board is designed to replace the traditional trolley-type trigger switch found in TM-style V2 gearboxes. It is not compatible with V2 gearbox variants that use a snap-action\/micro switch, such as Ares V2 gearboxes.\u003c\/p\u003e\n\u003cp\u003eCompatible with dual-solenoid or single-solenoid AEG gearbox conversion kits such as F2, F1, and JACK. Not compatible with the Fusion Engine system.\u003c\/p\u003e\n\u003cp\u003eConnector identification:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJ1 = Main lead\u003c\/li\u003e\n\u003cli\u003eJ2 = Poppet solenoid\u003c\/li\u003e\n\u003cli\u003eJ3 = Nozzle solenoid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e(In single-solenoid systems, connect to J2 and leave J3 empty.)\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237954408796,"sku":"10000205","price":34.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/10000205_1944x-e1698826507362.webp?v=1743391022"},{"product_id":"polarstar-switchboard-v3-liipasinkoneisto-f2-f1-jack","title":"Polarstar Switchboard, V3 trigger mechanism (F2 \/ F1 \/ JACK)","description":"\u003cp\u003ePolarstar V3 wiring board for use with dual-solenoid or single-solenoid systems such as F2, F1, or JACK. It is NOT compatible with the Fusion Engine system.\u003c\/p\u003e\n\u003cp\u003eThis wiring board is designed to replace the traditional TM-type V3 gearbox trolley-style trigger switch. It is not compatible with V3 gearbox variants that use a snap-action\/micro switch, such as Ares V3 gearboxes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector identification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJ1 = Main power\u003c\/li\u003e\n\u003cli\u003eJ2 = Poppet solenoid\u003c\/li\u003e\n\u003cli\u003eJ3 = Nozzle solenoid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e(For single-solenoid systems, connect to J2 and leave J3 empty.)\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237954539868,"sku":"10000206","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/10000206_1944x-e1698827041741.webp?v=1743391031"},{"product_id":"polarstar-f2-o-rengassarja","title":"Polarstar F2 o-ring set","description":"\u003cp\u003eComplete O-ring set for the F2 Centerline version (does not include O-rings required for the offset version).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x M1.5 x 10.0 (Buna 70) - For the outside of the nozzle\u003c\/li\u003e\n\u003cli\u003e1x M1.0 x 5.5 (Buna 70) - For the inside of the nozzle\u003c\/li\u003e\n\u003cli\u003e1x M1.5 x 7.5 (Buna 70) - For the inside of the front cylinder\u003c\/li\u003e\n\u003cli\u003e1x M1.0 x 2.5 (Buna 70) - For the inside of the rear cylinder\u003c\/li\u003e\n\u003cli\u003e1x M2.0 x 9.0 (Buna 70) - For the inside of the sleeve\u003c\/li\u003e\n\u003cli\u003e2x M1.0 x 19.0 (Buna 70) - For the outside of the sleeve\u003c\/li\u003e\n\u003cli\u003e1x 010 (Buna 70) - Front poppet\u003c\/li\u003e\n\u003cli\u003e1x M1.5 x 6.0 (Buna 70) - Rear poppet\u003c\/li\u003e\n\u003cli\u003e1x M1.0 x 4.5 (Buna 70) - Barb fitting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237954670940,"sku":"10000419","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/F2_O-ring_Kit_1944x-e1698827602153.webp?v=1743391040"},{"product_id":"polarstar-micro-reg-gen1-gen2-o-rengassarja","title":"Polarstar Micro Reg (GEN1 \u0026 GEN2) o-ring kit","description":"\u003cp\u003eComplete Seal Kit for Micro Reg (covers GEN1 and GEN2 versions)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2x M1.5 x 4.5 (Buna 70) - Body identifier\u003c\/li\u003e\n\u003cli\u003e1x M2.0 x 14.0 (Buna 70) - Piston outer diameter\u003c\/li\u003e\n\u003cli\u003e1x Base seal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237954703708,"sku":"10000422","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/10000422_1944x-e1698827737191.webp?v=1743391049"},{"product_id":"polarstar-ugs-cgs-type-1-o-rengassarja","title":"Polarstar UGS\/CGS Type 1 O-ring set","description":"\u003cp\u003eComplete O-ring set for UGS\/CGS Type 1 system:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x M1.5 x 4.5 (Buna 70) - Body identifier\u003c\/li\u003e\n\u003cli\u003e1x M2.0 x 14.0 (Buna 70) - Piston outer diameter\u003c\/li\u003e\n\u003cli\u003e1x M1.5 x 6.0 (Buna 70) - Type 1 outlet cap\u003c\/li\u003e\n\u003cli\u003e1x Base seal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237955096924,"sku":"10000390","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/10000390_1944x_ddd19006-9f44-4d5e-a153-b516a651218f.webp?v=1743391058"},{"product_id":"polarstar-ugs-cgs-type-2-o-rengassarja","title":"Polarstar UGS\/CGS Type 2 O-ring set","description":"\u003cp\u003eComplete O-ring set for UGS\/CGS Type 2 system:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x M1.5 x 4.5 (Buna 70) - Body identifier\u003c\/li\u003e\n\u003cli\u003e1x M2.0 x 14.0 (Buna 70) - Piston outer diameter\u003c\/li\u003e\n\u003cli\u003e2x M1.0 x 4.0 (Buna 70) - Type 2 Barb fitting\u003c\/li\u003e\n\u003cli\u003e1x Base seal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237955195228,"sku":"10000391","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/10000391_1944x-1-e1698828003988.webp?v=1743391067"},{"product_id":"polarstar-kythera-sa-o-rengassarja","title":"Polarstar Kythera SA o-ring set","description":"\u003cp\u003eComplete O-ring set for all Kythera SA versions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x M1.0x16.0 (Buna 70) - Rear cylinder identifier, Front (#5)\u003c\/li\u003e\n\u003cli\u003e1x M1.0x3.0 (Buna 70) - Barb fitting (#6)\u003c\/li\u003e\n\u003cli\u003e1x M1.5x13.0 (Buna 70) - Nozzle outer diameter, Front (#7)\u003c\/li\u003e\n\u003cli\u003e1x M1.5x15.0 (Buna 70) - Nozzle outer diameter, Rear (#8)\u003c\/li\u003e\n\u003cli\u003e1x M1.5x20.0 (Buna 70) - Rear cylinder identifier, Rear (#9)\u003c\/li\u003e\n\u003cli\u003e2x M1.5x4.0 (Buna 70) - Spool rear section (#10)\u003c\/li\u003e\n\u003cli\u003e2x M1.5x6.0 (Buna 70) - Spool front section (#11)\u003c\/li\u003e\n\u003cli\u003e1x M1.5x7.0 (Buna 70) - Nozzle inner diameter (#12)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237955293532,"sku":"10001174","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/KytheraSAO-ringKit_1944x-e1698828087773.webp?v=1743391075"},{"product_id":"mancraft-pdik-gen-3-tiivistesarja","title":"Mancraft PDiK Gen.3 gasket set","description":"\u003cp\u003eMancraft PDiK Seal Kit\u003c\/p\u003e\n\u003cp\u003eO-ring set for Mancraft PDiK Gen.3 HPA unit.\u003c\/p\u003e","brand":"Mancraft","offers":[{"title":"Default Title","offer_id":54237961847132,"sku":"MC0041GEN3","price":4.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mancraft-pdik-tiivistesarja-1_4f659976-64b5-4bf1-9dab-4e2fa5b41f78.png?v=1743391264"},{"product_id":"polarstar-wire-harness-mcu-ak-m60-pkm-liitin-18","title":"Polarstar Wire Harness MCU (A\u0026K M60\/PKM Connector) - 18\"","description":"\u003cp\u003ePolarStar Wire Harness MCU (A\u0026amp;K M60\/PKM connector) or MCU cable set is intended for use with the REV3 FCU control unit. The REV3 FCU includes a Motor Control Unit (MCU) function, which can be used to control the motor of the weapon's box magazine. The connector model of this wire harness is A\u0026amp;K compatible and a suitable connector can be found on, for example, A\u0026amp;K M60 and PKM airsoft replicas. With this wire harness you don't need to solder or connect anything. Simply plug the connector into place and your airsoft machine gun converted to compressed air is ready to be used with a box magazine! The cable supports both continuous feed and a separate button-activated box magazine setting.\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237984293212,"sku":"10000484","price":20.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/10000484_1296x-e1702058595684.webp?v=1743391595"},{"product_id":"polarstar-f2-offset-cylinder-conversion-muutossarja","title":"Polarstar F2 Offset Cylinder Conversion Kit","description":"\u003cp\u003eThe PolarStar F2™ Offset Cylinder Conversion Kit allows a standard centerline F2 HPA unit to be converted into an offset model.\u003c\/p\u003e\n\u003cp\u003eThe conversion kit includes the front cylinder, offset nozzle base, and support pin required to convert the F2™ centerline version into the Offset version. The set does not include the model-specific nozzle. Please refer to the nozzles category for the correct nozzle for your replica.\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237985571164,"sku":"10000193","price":79.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/F2_Offset_Cylinder_Conversion_1296x_ef493c1b-6393-4368-841b-6af50f856357.webp?v=1743391604"},{"product_id":"polarstar-f2-low-flow-poppet-venttiili-gold","title":"Polarstar F2 low flow poppet valve - Gold","description":"\u003cp\u003eThe PolarStar F2™ poppet valve is available in two levels: Red and Gold. The Red valve is the standard valve included with the F2™ and provides the highest airflow in this system. This makes it well-suited for airsoft guns intended for outdoor fields within allowed power limits.\u003c\/p\u003e\n\u003cp\u003eThe optional Gold valve expands the capabilities of the F2 system by making it more flexible and adaptable for tuning different builds. By replacing the Red valve in the F2™ HPA unit with the Low Flow Gold valve, you can lower the power range of the gun. This allows the gun to operate at high pressures while keeping the output power low. Sufficient operating pressure ensures flawless performance of the F2 unit even at very high rates of fire.\u003c\/p\u003e\n\u003cp\u003eThis Low Flow valve is particularly useful in situations where an airsoft gun with a long barrel needs to be tuned to low power levels, which may not be achievable within the regulator’s adjustment range.\u003c\/p\u003e\n\u003cp\u003eBelow is a comparison chart provided by PolarStar Airsoft showing the power output of the two different F2™ valves at various pressures and BB weights.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eO-rings\u003cbr\u003e\n\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1x\u003c\/td\u003e\n\u003ctd\u003e010 (Buna 70) - Front Poppet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1x\u003c\/td\u003e\n\u003ctd\u003eM1.5 x 6.0 (Buna 70) - Rear Poppet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/12\/F2_Poppet_Specs_White_Plain.webp\"\u003e\u003cimg class=\"alignnone size-medium wp-image-649682\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/F2_Poppet_Specs_White_Plain-300x261.webp\" alt=\"\" width=\"300\" height=\"261\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237986259292,"sku":"10000361","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/10000361_1296x-e1702061569349.webp?v=1743391615"},{"product_id":"polarstar-f2-standard-poppet-venttiili-red","title":"Polarstar F2 standard poppet valve - Red","description":"\u003cp\u003eThe PolarStar F2™ poppet valve is available in two levels: Red and Gold. The Red valve is the standard valve included with the F2™ and provides the highest airflow in this system. This makes it well-suited for airsoft guns intended for outdoor fields within allowed power limits.\u003c\/p\u003e\n\u003cp\u003eThe optional Gold valve expands the capabilities of the F2 system by making it more flexible and adaptable for tuning different builds. By replacing the Red valve in the F2™ HPA unit with the Low Flow Gold valve, you can lower the power range of the gun. This allows the gun to operate at high pressures while keeping the output power low. Sufficient operating pressure ensures flawless performance of the F2 unit even at very high rates of fire.\u003c\/p\u003e\n\u003cp\u003eThe Low Flow Gold valve is particularly useful in situations where an airsoft gun with a long barrel needs to be tuned to low power levels, which may not be achievable within the regulator’s adjustment range.\u003c\/p\u003e\n\u003cp\u003eBelow is a comparison chart provided by PolarStar Airsoft showing the power output of the two different F2™ valves at various pressures and BB weights.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eO-rings\u003cbr\u003e\n\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1x\u003c\/td\u003e\n\u003ctd\u003e010 (Buna 70) - Front Poppet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1x\u003c\/td\u003e\n\u003ctd\u003eM1.5 x 6.0 (Buna 70) - Rear Poppet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/12\/F2_Poppet_Specs_White_Plain.webp\"\u003e\u003cimg class=\"alignnone size-medium wp-image-649682\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/F2_Poppet_Specs_White_Plain-300x261.webp\" alt=\"\" width=\"300\" height=\"261\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237986292060,"sku":"10000289","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/10000289_1296x-e1702062425211.webp?v=1743391625"},{"product_id":"polarstar-fusion-engine-low-flow-poppet-valve-red","title":"Polarstar Fusion Engine low-flow poppet valve - red","description":"\u003cp\u003eThe PolarStar Fusion Engine low-flow poppet valve is a component that controls airflow within the Fusion Engine™ system. The valve is available in different restriction levels that either limit or maximize the amount of air passing through the barrel. By adjusting the airflow, you can reduce air consumption or adjust the system’s muzzle velocity depending on the type of valve you choose.\u003c\/p\u003e\n\u003cp\u003eThe Red Low Flow valve is a mid-level restriction valve that offers a good balance of power and efficiency.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eO-rings\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1x\u003c\/td\u003e\n\u003ctd\u003eM2.0 x 19.0 (Buna 70) - Poppet Retainer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1x\u003c\/td\u003e\n\u003ctd\u003eM1.5 x 15.0 (Buna 70) - Poppet Sail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1x\u003c\/td\u003e\n\u003ctd\u003e011 (Buna 70) - Poppet Seat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1x\u003c\/td\u003e\n\u003ctd\u003e011 (Buna 90) - Poppet Base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.atom-airsoft.fi\/wp-content\/uploads\/2023\/12\/poppet_three.webp\"\u003e\u003cimg class=\"size-medium wp-image-649690 aligncenter\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/poppet_three-300x125.webp\" alt=\"\" width=\"300\" height=\"125\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eHow does the poppet valve work?\u003c\/h2\u003e\n\u003cp\u003eThe standard black valve in the Fusion Engine™ provides maximum airflow through the system, and the nozzle restricts the flow into the barrel, which affects the gun’s muzzle velocity. This gives the gun a wide velocity adjustment range simply by changing the nozzle. With the black poppet valve, you can adjust the velocity range by swapping the nozzle alone.\u003c\/p\u003e\n\u003cp\u003eThe Low Flow valve does exactly what its name suggests—it restricts the airflow passing through the valve. As a result, the flow restriction point that affects the gun’s power moves from the nozzle to the poppet valve inside the system. Normally, the nozzle acts as the restriction point, and air accumulates in the space between the valve and the nozzle, from where it flows into the barrel at the rate allowed by the nozzle channel. If a more restrictive nozzle is needed to keep the gun within field velocity limits, pressurized air remains trapped between the poppet valve and the nozzle after the valve closes and the BB exits the barrel. This leftover air is wasted and unnecessarily empties the air tank. The poppet valve’s position is controlled by the Fusion Engine’s second solenoid. When the poppet valve becomes the main restriction point instead of the nozzle, air consumption is reduced because less air is released through the valve at once.\u003c\/p\u003e\n\u003cp\u003eThe Low Flow valve also helps improve the consistency of airflow through the barrel, as the air has time to expand slightly in the system after passing through the valve. This reduces turbulence behind the BB, which can slightly improve accuracy. The nozzle does not restrict the flow as much when the poppet valve is the main restrictor. However, the nozzle can still limit airflow if the incoming flow exceeds what the nozzle can pass at once. For this reason, it is generally recommended to use a high-flow black, silver, or red nozzle with the Low Flow poppet valve. When the red Low Flow valve is installed together with these higher-flow nozzles, the Fusion Engine can achieve up to 50% better air efficiency compared to the standard version while producing the same muzzle energy for the BB.\u003c\/p\u003e\n\u003cp\u003eThe red Low Flow valve allows an airsoft gun to be optimized for the best efficiency within tuning limits. While it may not reach the same maximum muzzle velocity as the standard valve, it can still meet the velocity limits for full-auto and DMR builds with better efficiency.\u003c\/p\u003e\n\u003cp\u003eHere are examples of how the red Low Flow valve affects muzzle velocity. Tests were conducted at 80 psi and 120 psi using a VFC M4 rifle with a standard hop-up and a 6.05x380 mm barrel.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRed Nozzle\u003c\/td\u003e\n\u003ctd\u003e400fps - 485fps w\/ .20g\u003c\/td\u003e\n\u003ctd\u003e355fps - 415fps w\/ .32g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSilver Nozzle\u003c\/td\u003e\n\u003ctd\u003e390fps - 450fps w\/ .20g\u003c\/td\u003e\n\u003ctd\u003e340fps - 390fps w\/ .32g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack Nozzle\u003c\/td\u003e\n\u003ctd\u003e370fps - 430fps w\/ .20g\u003c\/td\u003e\n\u003ctd\u003e325fps - 375fps w\/ .32g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=5rrpN1OcD64\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237986554204,"sku":"10000280","price":49.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/poppet_red_1296x-e1702072790114.webp?v=1743391633"},{"product_id":"polarstar-trigger-lead-6-universaali-liipaisinjohto","title":"Polarstar Trigger Lead, 6\" universal trigger lead","description":"\u003cp\u003eThe PolarStar universal trigger wire is primarily designed to be routed into the original trigger mechanism of an airsoft gun that does not have a PolarStar trigger board available. Such guns include models like the VFC HK417 or Classic Army KAC LMG.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 6 inches\u003c\/li\u003e\n\u003cli\u003e2-pin JST ZH series connector with bare wire.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237986586972,"sku":"10000478","price":5.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/10000478_1296x-e1702105189219.webp?v=1743391643"},{"product_id":"polarstar-wire-harness-mcu-universal-18","title":"Polarstar Wire Harness MCU (Universal) - 18\"","description":"\u003cp\u003eThe PolarStar Wire Harness MCU (Universal) is designed for use with the REV3 FCU control unit. The REV3 FCU includes a \u003cstrong\u003eMotor Control Unit (MCU)\u003c\/strong\u003e function, which allows control of the box magazine motor, for example in M249-style airsoft guns.\u003c\/p\u003e\n\u003cp\u003eInstalling this wiring harness requires soldering.\u003c\/p\u003e","brand":"Polarstar","offers":[{"title":"Default Title","offer_id":54237988684124,"sku":"10000485","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/10000485_1296x-e1702105797131.webp?v=1743391651"},{"product_id":"epes-hpa-co2-pullon-o-rengassarja-3kpl","title":"EPeS HPA \/ CO2 cylinder o-ring set (3pcs)","description":"\u003cp\u003eSeal for the threaded output of an HPA tank or regulator. Made from polyurethane (PU)\u003cbr\u003e\nPackage includes 3 seals.\u003c\/p\u003e","brand":"EPeS","offers":[{"title":"Default Title","offer_id":54238114316636,"sku":"E181-OUT","price":4.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/e025-2.jpg?v=1743393248"},{"product_id":"epes-igl-mallinen-hpa-sf-ilmalinja-20cm","title":"EPeS IGL model HPA S\u0026F air line - 20cm - Coyote","description":"\u003cp\u003eIGL-type S\u0026amp;F hose for HPA system - male QD + 1\/8NPT - 20cm braided\u003c\/p\u003e\n\u003cp\u003eNote: Installing the hose requires an adapter between the HPA engine air line and the IGL hose. For example, a 6mm push-in fitting with a 1\/8 female thread on one end.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"EPeS","offers":[{"title":"Default Title","offer_id":54238114578780,"sku":"E125-20-COT","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/e105-20-cot-1.jpg?v=1743393261"}],"url":"https:\/\/atom-airsoft.fi\/en-de\/collections\/hpa-accessories.oembed","provider":"Atom Airsoft","version":"1.0","type":"link"}