Description
Specna Arms SA-F05-RL FLEX™ Light Ops Stock / New Receiver HAL ETU™ Gen. 2 - Olive
The Specna Arms SA-F05-RL FLEX™ Gen. 2 is a lightweight M4-style AEG combining an updated nylon-reinforced polymer receiver with advanced internal components. Its programmable HAL™ ETU electronic trigger system, reinforced Aether™ V2 gearbox, Magnus™ TDC hop-up and Helium™ Flat Hop bucking make it an attractive choice for players who want responsive trigger performance, extensive adjustment options and a well-equipped rifle without immediately investing in internal upgrades.
The updated FLEX™ Gen. 2 series brings several technologies from Specna Arms' more advanced rifle ranges into a more accessible platform. The SA-F05-RL features a longer M-LOK handguard, ergonomic Light Ops stock, ambidextrous controls and an adjustable overall length, making it suitable for both outdoor airsoft games and players who prefer a lightweight, easily handled rifle.
HAL™ ETU Gen. 2 - Programmable Electronic Trigger System
The factory-installed HAL™ ETU uses magnetic Hall-effect sensors to detect trigger movement instead of conventional mechanical trigger contacts. Contactless detection reduces wear associated with traditional trigger contacts and allows the trigger activation point to be adjusted electronically.
The system provides extensive control over trigger sensitivity, pre-cocking and firing modes. Settings are programmed directly using the trigger and fire selector, without requiring an external programming device or smartphone application.
Adjustable trigger sensitivity and pre-cocking
Trigger sensitivity can be adjusted in five levels, corresponding to 20-100% of the trigger travel. A shorter activation distance provides a more responsive trigger feel, particularly useful for rapid semi-automatic shooting.
The six-level pre-cocking function allows the piston to remain partially tensioned after a shot. This reduces the amount of mechanical movement required before the next shot and can significantly improve semi-automatic trigger response.
Higher pre-cocking settings increase spring tension and the mechanical load on gearbox components, so the adjustment should be selected according to the complete gearbox configuration.
Programmable firing modes
The HAL™ ETU allows the firing modes assigned to the SEMI and AUTO selector positions to be configured separately:
- AUTO position: Full Auto, Semi-Auto, 3-Round Burst or 5-Round Burst
- SEMI position: Semi-Auto, Binary Trigger, AUG Mode or Sniper Mode
- Binary Trigger: Fires once when the trigger is pulled and once when released
- AUG Mode: Partial trigger pull for semi-automatic fire and full trigger pull for automatic fire
- Sniper Mode: Semi-automatic fire with a two-second delay between shots
These options allow the rifle to be configured for different playing preferences, from conventional semi-automatic operation to controlled bursts and highly responsive trigger behaviour.
Electronic protection and motor control
The HAL™ system includes an adjustable active brake, low-battery warning and electronic protection against abnormal operating conditions. Its brushless motor compatibility also provides additional flexibility for future upgrades.
This standard SA-F05-RL model should not be confused with the separate FLEX™ BLDC™ version, which is equipped with a factory-installed brushless motor. When upgrading to a brushless motor, the active brake must be disabled according to the manufacturer's instructions.
Reinforced Aether™ V2 Gearbox
The SA-F05-RL features Specna Arms' reinforced Aether™ Version 2 gearbox, designed for durability, maintenance and future tuning. Its strengthened construction includes additional reinforcement around critical areas, particularly the front of the gearbox shell.
The gearbox also incorporates several practical inspection and adjustment features:
- Reinforced Aether™ V2 gearbox shell
- Inspection windows for piston Angle of Engagement (AoE) and pre-cocking
- Anti-reversal latch release access
- Mechanical trigger travel adjustment
- Gearbox alignment points
- ESA™ quick spring-change system
These features make the gearbox easier to inspect and maintain while providing a durable foundation for the HAL™ electronic trigger system.
Durable Internal Components
The FLEX™ Gen. 2 features reinforced internal components designed to support regular use and provide a solid starting point for future upgrades.
The gearbox includes:
- Steel gears
- Polycarbonate piston with a full-length steel tooth rack
- Sealed aluminium nozzle
- Steel cut-off lever
- 8 mm bushings
- Factory-installed HAL™ ETU electronic trigger system
The steel-toothed piston and reinforced gearbox components provide improved resistance to mechanical wear compared with basic polymer-toothed piston arrangements. The sealed aluminium nozzle supports consistent compression when the other air-seal components are correctly matched.
Magnus™ TDC Hop-Up and Helium™ Flat Hop Bucking
The SA-F05-RL is equipped with the Specna Arms Magnus™ TDC (Top Dead Center) rotary hop-up chamber. Its adjustment mechanism applies pressure vertically to the hop-up bucking, helping maintain consistent contact with the BB and making hop-up adjustments more repeatable.
The Helium™ Flat Hop bucking provides a broad contact surface designed to generate stable and consistent backspin. This is particularly useful when using heavier BBs, which require sufficient hop-up grip to maintain a predictable trajectory.
A 6.03 mm precision inner barrel with a length of approximately 320 mm completes the hop-up assembly, providing a well-equipped foundation for consistent shooting performance.
ESA™ Quick Spring Change System
The ESA™ system allows the main spring to be replaced without opening the gearbox, making it easier to adapt the rifle's power to different field limits.
The spring can be accessed through the rear of the receiver after removing the stock and buffer tube. The spring guide is accessed using an appropriate hex key, allowing the spring to be replaced before reassembly.
An additional M90 spring is included for lower-powered configurations. This is particularly useful for players who want to adapt the rifle for different playing environments without purchasing a separate replacement spring.
The actual muzzle velocity depends on the installed spring and the compression system. The rifle's power should be checked with a chronograph after changing springs.
When using the M90 spring, Specna Arms recommends a 7.4V battery to reduce the risk of malfunctions caused by excessive gearbox cycling speed.
Updated FLEX™ Receiver and Light Ops Stock
The SA-F05-RL features an updated nylon fibre-reinforced polymer receiver designed to combine low weight with a rigid external construction. Important components, including the outer barrel, flash hider, charging handle and several control parts, are manufactured from metal.
The rifle features ambidextrous fire selector and magazine release controls, making operation convenient for both right- and left-handed players. A functional bolt catch provides easier access to the hop-up adjustment mechanism.
The lightweight Light Ops stock features six adjustment positions, rubberised cheek contact surfaces and a curved rubber butt pad. Its minimalist design keeps unnecessary weight to a minimum while allowing the stock length to be adjusted to the player.
The long polymer M-LOK handguard provides mounting positions for compatible accessories, while the full-length Picatinny top rail accommodates optics and sighting equipment. Folding iron sights are also included.
A 14 mm CCW muzzle thread beneath the flash hider allows compatible tracer units, suppressor replicas and other muzzle devices to be installed.
Technical Specifications
- Manufacturer: Specna Arms
- Series: FLEX™ Gen. 2
- Model: SA-F05-RL Light Ops Stock / New Receiver HAL ETU™ Gen. 2
- Product type: Electric airsoft rifle (AEG)
- Platform: M4 / AR15
- Calibre: 6 mm BB
- Receiver material: Nylon fibre-reinforced polymer
- Handguard: Polymer M-LOK
- Stock: Six-position adjustable Light Ops stock
- Gearbox: Reinforced Aether™ V2
- Electronic trigger unit: HAL™ ETU Gen. 2
- Trigger detection: Magnetic Hall-effect sensors
- Trigger sensitivity: 5 adjustable levels
- Pre-cocking: 6 adjustable levels
- Active brake: Adjustable
- Firing modes: Programmable Semi-Auto, Full-Auto, Burst, Binary, AUG and Sniper modes
- Gearbox internals: Steel gears, steel-toothed polycarbonate piston, sealed aluminium nozzle and steel cut-off lever
- Bushings: 8 mm
- Quick spring change: ESA™
- Additional spring: M90
- Hop-up chamber: Adjustable Magnus™ TDC
- Hop-up bucking: Helium™ Flat Hop
- Inner barrel diameter: 6.03 mm
- Inner barrel length: 320 mm
- Overall length: approximately 760-850 mm
- Weight: approximately 2270 g
- Magazine type: S-MAG hi-cap
- Magazine capacity: 300 rounds
- Battery connector: T-plug / Deans
- Battery compartment: Stock / buffer tube
- Muzzle thread: 14 mm CCW
- Blowback: No
- Colour: Olive
- Manufacturer product code: SPE-01-047447
- EAN: 5902543207302
Package Contents
- 1 × Specna Arms SA-F05-RL FLEX™ Light Ops Stock / New Receiver HAL ETU™ Gen. 2 - Olive
- 1 × 300-round S-MAG hi-cap magazine
- 1 × M90 replacement spring
- 1 × Cleaning rod
- 1 × Small Tamiya-to-Deans battery adapter
- 1 × Hex key
Battery and charger are not included and must be purchased separately.
HAL™ Trigger Activation Before First Use
The HAL™ trigger must be activated before the rifle is used for the first time. Follow these steps:
- Set the fire selector to SAFE.
- Connect the battery while the selector remains in SAFE.
- Wait approximately 3 seconds until the rifle emits a beep.
- Pull the trigger fully and hold it for approximately 5 seconds until another beep is heard.
The second beep confirms successful activation. The procedure must also be repeated after restoring the HAL™ factory settings.


















